Exploration Update - Clermont and Commonwealth Projects
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 15 May 2018
Number: 582/150518
EXPLORATION UPDATE:
CLERMONT GOLD PROJECT, QUEENSLAND
IP Geophysical Survey Nearing Completion
COMMONWEALTH PROJECT, NEW SOUTH WALES
Drill Programme to Commence by Late June
An Induced Polarisation (IP) gradient array survey is
nearing completion at Impact Minerals Limited’s
100% owned Clermont gold project located in the
southern part of the Drummond Basin in Central
Queensland, a prolific epithermal gold-silver belt
which hosts several world class gold deposits such as
Pajingo (Vera-Nancy) (>5 Moz), Mt Leyshon
(>3 Moz) and Mt Wright (>1 Moz) (Figure 1).
Exploration at Clermont has been reinvigorated
following a strategic review of the project last Quarter
and reported in the March Quarterly report.
The aim of the IP survey is to identify targets to be
drill tested as soon as practicable and shortly after
completion of the planned drill programme at
Impact’s 100% owned Commonwealth gold-silver
project in New South Wales. Drilling at
Commonwealth is scheduled to start by late June.
The IP survey at Clermont is centred over two key
prospects, Retro and Retro-Extended, at the northern
end of the Retro Fault System, a 10 km trend of goldsilver and base metal mineralisation. From south to
north along the Retro Fault system, a transition may
be present from bulk tonnage porphyry-style
mineralisation to high grade precious and base metalrich epithermal mineralisation (Figure 2).
Figure 1. Location of the Clermont Project in the Drummond Basin, central Queensland.
26 Richardson Street West Perth Western Australia 6005
Tel +61 (8) 6454 6666 Facsimile +61 (8) 6314 6670
Email info@impactminerals.com.au www.impactminerals.com.au
The purpose of the current IP survey is to assess continuity of the mineralised structure over a strike
length of about 5 kilometres from north of Retro to south of Retro Extended (Figures 2 and 3).
Figure 2. Location of the Retro Fault System showing the Retro, Retro Extended and Nanya Prospects.
RETRO EXTENDED
This prospect is a gold-bearing quartz reef/vein system where previous explorers completed 27 RC holes
for 1342 metres. A mineralised vein system was defined over 200 metres of strike and 75 metres depth.
A standout drill assay returned
8 m at 16.1 g/t gold, 143 g/t silver, 5.6% copper and 7.8% lead from 8 metres in RERC1 (Figure 3).
Impact (under Invictus Gold Limited, now a wholly owned subsidiary of Impact) completed follow up
soil and rock chip geochemistry surveys and 7 RC holes for 974 metres. This work extended the total
strike of mineralisation at Retro Extended up to 1,200 metres and to 125 metres below surface.
Figure 3. Geology and exploration results for the Retro-Retro Extended Prospects. Also shown is the
location of the current IP Survey.
Importantly Impact established for the first time that the narrower zones of high grade mineralisation
occurred within much thicker zones of disseminated sulphide and alteration containing anomalous
silver, lead and zinc. This suggests that the host structure is a coherent zone of considerable fluid flow
and not isolated discontinuous veins.
For example, RERC030 was drilled to test the down dip extension of mineralisation at a depth of
130 metres below surface (Figures 3 and 4) and intersected two mineralised structures comprising silicachlorite-epidote altered sandstones with extensive quartz veining and up to 10% sulphides (pyrite,
chalcopyrite and arsenopyrite). This zone returned:
8 m at 2.3 g/t gold, 6.1 g/t silver, 0.05% copper, 0.1% lead and 0.1% zinc from 135 m including
2 m at 6.3 g/t gold, 9.7 g/t silver, 0.04% copper, 0.3% lead and 0.1% zinc from 141 metres; and
2 m at 0.8 g/t gold, 4.9 g/t silver with minor copper, lead and zinc from 161 metres.
These two zones occur in the centre of a 50 m thick zone (true thickness) of weaker mineralisation and
alteration that returned: 90 m at 1.2 g/t silver, 313 ppm zinc and 163 ppm lead (Figure 4).
Further drilling should lead to the definition of a JORC compliant Inferred Resource in this area.
Figure 4. Section 7,467,200 mN. Geology and assays for hole RERC030 with previous drill results
OTHER PROSPECTS
Field checking and grab samples from along the Retro Fault System also confirmed the potential for
epithermal mineralisation over 10 km of strike as well as porphyry-style mineralisation at the Nanya
Prospect at the southern end of the Retro Fault System (Figure 2).
For example, grab samples of epithermal quartz veins and rare volcanic breccia at various prospects
have returned assays of up to the following:
Retro
3.5 g/t gold, 57.7 g/t silver, 234 ppm copper and 3.6% lead. Previous drilling at Retro
also returned 2 m at 13.7 g/t gold from 34 metres;
Retro South
5.4 g/t gold, 75 g/t silver and 500 ppm copper;
Retro East
0.8 g/t gold, 3.3 g/t silver and 0.6% lead.
In addition, 1,000 m south of the main mineralisation at Retro Extended colloform banded quartz veins
returned up to 2.6 g/t gold, 61.3 g/t silver, 380 ppm copper, 6.1% lead and 830 ppm zinc.
At the Nanya Prospect located 5 km southwest of Retro Extended, a large east trending sericite-pyrite
alteration zone at least 1,500 m by 300 metres in dimension has been mapped on the northern margin of
the Retreat Granite. Grab samples by both Impact and previous explorers have returned up to:
370 ppm molybdenum, 26 g/t silver, 175 ppm copper, 2.7% lead and 730 ppm zinc in separate samples
in granite; and
98.7 g/t silver, 0.13% molybdenum, 0.16% copper, 4.8% lead and 0.16% zinc in laminated and bladedtextured gossanous quartz veins in sericite altered granite. Gold values were less than 100 ppb.
The geological characteristics of the Nanya Prospect are similar to those at the large Anthony porphyry
molybdenum deposit located 100 km to the northwest (Inferred and Indicated Resource of 318 Mt at
390 ppm molybdenum at a 200 ppm cut off).
All of these results indicate there is significant exploration potential along the Retro Fault System
for the discovery of a major deposit and that further exploration is warranted as a priority.
COMMONWEALTH DRILL PROGRAMME
Preparations continue for the start of the follow up drill programme at Commonwealth. Negotiations
with drill contractors are underway and final statutory permits awaited. It is anticipated the programme
will start by the end of June.
Dr Michael G Jones
Managing Director
The review of exploration activities and results contained in this report is based on information compiled by Dr Mike Jones, a Member of
the Australian Institute of Geoscientists. He is a director of the company and works for Impact Minerals Limited. He has sufficient
experience which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is
undertaking to qualify as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration Results,
Mineral Resources and Ore Reserves (the JORC Code). Dr Jones has consented to the inclusion in the report of the matters based on his
information in the form and context in which it appears.
Impact Minerals confirms that it is not aware of any new information or data that materially affects the information included in the
previous market announcements referred to and in the case of mineral resource estimates, that all material assumptions and technical
parameters underpinning the estimates continue to apply and have not materially changed.
APPENDIX 1 - SECTION 1 SAMPLING TECHNIQUES AND DATA
Criteria
JORC Code explanation
Sampling techniques
Nature and quality of sampling (e.g. cut channels, random chips,
or specific specialised industry standard measurement tools
appropriate to the minerals under investigation, such as down
hole gamma sondes, or handheld XRF instruments, etc). These
examples should not be taken as limiting the broad meaning of
sampling.
Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used
Aspects of the determination of mineralisation that are Material
to the Public Report. In cases where ‘industry standard’ work has
been done this would be relatively simple (e.g. ‘reverse
circulation drilling was used to obtain 1 m samples from which 3
kg was pulverised to produce a 30 g charge for fire assay’). In
other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine
nodules) may warrant disclosure of detailed information
Commentary
Rock chip samples
Random grab samples were taken at surface which represented favourable geology and alteration to known mineralisation in
the region. Samples are variably weathered.
Soil Samples
About 250g of soil was taken from 15-20cm below surface and sieved to - 2mm size. Samples put in plastic snap seal bags.
Samples were subsequently sieved to -250 micron at ALS Laboratories for assay by the MMI technique.
RC Drilling
Reverse Circulation (RC) percussion drilling was used to produce a 1m bulk sample (~25kg) which was collected in plastic bags
and representative 1m split samples (12.5%, or nominally 3kg) were collected using a riffle splitter and placed in a calico bag.
The cyclone was cleaned out with compressed air at the end of each hole and periodically during the drilling. Holes were drilled
to optimally intercept interpreted mineralised zones.
Rock chip samples
Representative samples at each sample site weigh between 0.8 and 1.2 kg. Sample sites were chosen in areas highlighted by soil
geochemistry results and the geophysical surveys conducted on the Clermont Project.
Soil Samples and Drill Samples
Sample representivity was ensured by a combination of Company Procedures regarding quality control (QC) and quality
assurance / testing (QA).
Examples of QC include (but are not limited to), daily workplace and equipment inspections, as well as drilling and sampling
procedures. Examples of QA include (but are not limited to) collection of “field duplicates”, the use of certified standards and
blank samples approximately every 50 samples
Rock chip samples
Rock samples were sent to SGS Laboratories in Brisbane where they were crushed, dried and pulverised (total prep) to produce
a 25-30 g sub-samples for analysis initially by Aqua Regia digest with ICP-MS finish, gold by Fire Assay. Further rock samples
were also sent to ALS Laboratories Townsville for Aqua Regia digest with ME_ICP61 and Fire Assay techniques for gold.
Soil Samples
Soil samples were sent to SGS Laboratories in Perth for analysis by the MMI digest.
RC and diamond drill samples
RC samples were submitted to ALS Laboratories Townsville for Aqua Regia digest with ME_ICP61 and AA25 Fire Assay technique
for gold. Sample preparation involved: sample crushed to 70% less than 2mm, riffle split off 1 kg, pulverise split to >85%
passing 75 microns.
Historical RC samples were sent to Samples analysed at ALS Townsville by method PM209 for Au (0.01ppm). Impact has no
reason to doubt the validity of these samples for the purposes of reporting Exploration Results.
Criteria
Drilling techniques
Drill sample recovery
JORC Code explanation
Drill type (e.g. core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc) and details (e.g. core
diameter, triple or standard tube, depth of diamond tails, facesampling bit or other type, whether core is oriented and if so, by
what method, etc).
RC drilling accounts for 100% of the drilling and comprises 4-inch hammer.
Method of recording and assessing core and chip sample
recoveries and results assessed
RC samples were visually checked for recovery, moisture and contamination.
Measures taken to maximise sample recovery and ensure
representative nature of the samples
Whether a relationship exists between sample recovery and
grade and whether sample bias may have occurred due to
preferential loss/gain of fine/coarse material.
Logging
Sub-sampling
techniques and
sample preparation
Commentary
Whether core and chip samples have been geologically and
geotechnically logged to a level of detail to support appropriate
Mineral Resource estimation, mining studies and metallurgical
studies.
The RC samples are collected by plastic bag directly from the rig-mounted cyclone and laid directly on the ground in rows of 10.
The drill cyclone and sample buckets are cleaned between rod-changes and after each hole to minimise down-hole and/or cross
contamination.
No sample bias has been established.
Geological logging of samples followed company and industry common practice. Qualitative logging of samples included (but
not limited to); lithology, mineralogy, alteration, veining and weathering. Diamond core logging includes additional fields such
as structure and geotechnical parameters.
Magnetic Susceptibility measurements were taken for each 1m RC sample
Whether logging is qualitative or quantitative in nature. Core (or
costean, channel, etc) photography.
All logging is quantitative, based on visual field estimates. Chip trays with representative 1m RC samples were collected and
photographed then stored for future reference.
The total length and percentage of the relevant intersections
logged
All RC chips samples were geologically logged by Impact’s on-site geologist on a 1m basis.
If core, whether cut or sawn and whether quarter, half or all core
taken.
Not applicable
If non-core, whether riffled, tube sampled, rotary split, etc and
whether sampled wet or dry.
RC samples were split using a riffle splitter.
For all sample types, the nature, quality and appropriateness of
the sample preparation technique.
Company procedures were followed to ensure sub-sampling adequacy and consistency. These included (but were not limited
to), daily work place inspections of sampling equipment and practices, as well as sub-sample duplicates (“field duplicates”).
Quality control procedures adopted for all sub-sampling stages
to maximise representivity of samples.
Laboratory QC procedures for rock sample assays involve the use of internal certified reference material as assay standards,
along with blanks, duplicates and replicates.
The QC procedure for historical RC samples is unknown but considered immaterial
Criteria
Quality of assay data
and laboratory tests
JORC Code explanation
Measures taken to ensure that the sampling is representative of
the in situ material collected, including for instance results for
field duplicate/second-half sampling.
Not applicable
Whether sample sizes are appropriate to the grain size of the
material being sampled.
The samples sizes at Clermont are considered appropriate at this stage and the nugget effect for gold is not material.
The nature, quality and appropriateness of the assaying and
laboratory procedures used and whether the technique is
considered partial or total.
For geophysical tools, spectrometers, handheld XRF instruments,
etc, the parameters used in determining the analysis including
instrument make and model, reading times, calibrations factors
applied and their derivation, etc.
Verification of
sampling and
assaying
Location of data
points
Data spacing and
distribution
Commentary
An industry standard fire assay technique for samples using lead collection with an Atomic Absorption Spectrometry (AAS)
finish was used for gold and aqua regia digest for base metals and silver.
The quality of historical drill sample assays is unknown, however this is considered immaterial at this stage of exploration.
Not applicable
Nature of quality control procedures adopted (e.g. standards,
blanks, duplicates, external laboratory checks) and whether
acceptable levels of accuracy (i.e. lack of bias) and precision have
been established.
For the rock chips, quality control procedures for assays were followed via internal laboratory protocols. Accuracy and precision
are within acceptable limits.
The quality of historical drill sample assays is unknown, however this is considered immaterial at this stage of exploration.
The verification of significant intersections by either independent
or alternative company personnel.
Significant intersections from drilling have not been verified by independent or alternative companies. This is not required at
this stage of exploration.
The use of twinned holes.
Not applicable
Documentation of primary data, data entry procedures, data
verification, data storage (physical and electronic) protocols.
Primary assay data for rock chips has been entered into standard Excel templates for plotting in Mapinfo and Target. All
historical drill data has been entered digitally by previous explorers and verified internally by Impact.
Discuss any adjustment to assay data.
No significant adjustments have been required.
Accuracy and quality of surveys used to locate drill holes (collar
and down-hole surveys), trenches, mine workings and other
locations used in Mineral Resource estimation.
Recent drill holes have been located by GPS. Historical drill holes and mine shafts have been verified by GPS.
Specification of the grid system used.
The grid system for Clermont is MGA_GDA94, Zone 55.
Quality and adequacy of topographic control.
Standard government topographic maps have been used for topographic validation. The GPS is considered sufficiently accurate
for elevation data.
For the RC drill holes, down hole dip surveys were taken at approximately 30m intervals and at the bottom of the hole.
Data spacing for reporting of Exploration Results.
Drill spacing of drill holes ranges between 40 and 50 m which is considered adequate for Exploration Results.
Criteria
JORC Code explanation
Commentary
Whether the data spacing and distribution is sufficient to
establish the degree of geological and grade continuity
appropriate for the Mineral Resource and Ore Reserve estimation
procedure(s) and classifications applied.
Drill spacing of drill holes ranges between 10 and 50 m and may be considered adequate for Mineral Resource and Ore reserve
estimation procedures. However estimations of grade and tonnes have not yet been made.
Whether sample compositing has been applied.
Sample compositing has been applied for quoting drill composite results only.
Whether the orientation of sampling achieves unbiased sampling
of possible structures and the extent to which this is known,
considering the deposit type.
Drilling is oriented sub-perpendicular to the mineralised trend and stratigraphic contacts as determined by field data and cross
section interpretation.
If the relationship between the drilling orientation and the
orientation of key mineralised structures is considered to have
introduced a sampling bias, this should be assessed and reported
if material.
No significant sample bias has been identified from drilling due to the optimum drill orientation described above. Where
present, sample bias will be reported.
Sample security
The measures taken to ensure sample security.
For rock samples, chain of custody is managed by Impact Minerals Ltd. Samples for Clermont are delivered by Impact Minerals
Ltd personnel via courier service to ALS in Townsville, Qld or to SGS Brisbane, or to ALS in Perth, for prep and assay. Whilst in
storage, they are kept in a locked yard. Tracking sheets have been set up to track the progress of batches of samples.
Security of historic drill samples is unknown however is considered immaterial.
Audits or reviews
The results of any audits or reviews of sampling techniques and
data.
A review of the sampling techniques and data both of historic drill holes and of Impact’s has not been completed.
Orientation of data in
relation to geological
structure
SECTION 2 REPORTING OF EXPLORATION RESULTS
Criteria
Mineral tenement and land
tenure status
Exploration done by other
parties
Geology
JORC Code explanation
Commentary
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The Clermont Project currently comprises 1 exploration licence covering 66 km2. The tenement is held
100% by Drummond West Pty Ltd, a subsidiary company of Impact Minerals Limited. No aboriginal sites
or places have been declared or recorded in areas where Impact is currently exploring. There are no
national parks over the license area.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
The tenements are in good standing with no known impediments.
Acknowledgment and appraisal of exploration by other parties.
A total of 19 drill holes at Retro, and 27 drill holes at Retro extended have been completed at the
Clermont Project by previous explorers.
Deposit type, geological setting and style of mineralisation.
The Retro and Retro Extended deposits in the Clermont Project are low-sulphidation, epithermal highgrade gold-silver deposits that occur along the Retro Fault Complex 10 km strike length
Criteria
Drill hole Information
Data aggregation methods
JORC Code explanation
Commentary
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for
all Material drill holes:
easting and northing of the drill hole collar
elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
dip and azimuth of the hole
down hole length and interception depth
hole length.
See Table in text.
In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (e.g. cutting of high grades)
and cut-off grades are usually Material and should be stated.
All reported assays have been length weighted. No top cuts have been applied. A nominal cut-off of
approximately 0.5 g/t Au has been applied.
Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used for
such aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
High grade gold intervals internal to broader zones of lower grade mineralisation are reported as
included intervals.
The assumptions used for any reporting of metal equivalent values should
be clearly stated.
Not applicable
Relationship between
mineralisation widths and
intercept lengths
These relationships are particularly important in the reporting of
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole angle is
known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (e.g. ‘down hole length, true
width not known’).
Diagrams
Appropriate maps and sections (with scales) and tabulations of intercepts
should be included for any significant discovery being reported These
should include, but not be limited to a plan view of drill hole collar
locations and appropriate sectional views.
Refer to Figures in body of text.
Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades and/or
widths should be practiced to avoid misleading reporting of Exploration
Results.
All results reported are representative
Balanced reporting
The majority of previous and current drill holes to date have been sub-perpendicular to the mineralised
trend and stratigraphy so intervals are close to true width or otherwise stated.
Criteria
JORC Code explanation
Other substantive exploration
data
Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical survey
results; geochemical survey results; bulk samples – size and method of
treatment; metallurgical test results; bulk density, groundwater,
geotechnical and rock characteristics; potential deleterious or
contaminating substances.
Further work
The nature and scale of planned further work (e.g. tests for lateral
extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions, including
the main geological interpretations and future drilling areas, provided this
information is not commercially sensitive
Commentary
Assessment of other substantive exploration data is not yet complete however considered immaterial at
this stage.
Follow up work programmes will be subject to interpretation of recent and historic results which is
ongoing.
Share your feedback
Discover