Quarterly Activities Report
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 8 April 2016
No. 459/080416
Market Cap
A$20.5m (0.029 p/s)
MARCH 2016 QUARTERLY REPORT
SUMMARY
1. BROKEN HILL PGM-Ni-Cu PROJECT, N.S.W. (Impact 100%)
Issued Capital
708,679,401
Platinum Springs Prospect
0.6 metres at 11.5 g/t platinum, 25.6 g/t palladium, 1.4 g/t
gold, 7.6% copper, 7.4% nickel and 44.3 g/t silver
within a broader intercept of
2.75 metres at 3.5 g/t platinum, 7 g/t palladium, 0.4 g/t gold,
2% copper, 1.9% nickel and 11.6 g/t silver
Directors
Peter Unsworth
Ground EM survey identifies further drill targets.
Chairman
Dora East Prospect
Dr Michael Jones
1.6 metres at 22.0% zinc, 3.6% lead and 66.7 g/t silver
within a broader intercept of
7 metres at 7.0% zinc, 1.1% lead and 20.1 g/t silver
also
0.7 metres at 2.4% copper and 22.5 g/t silver
Three drill holes have returned significant intercepts of zincsilver-lead mineralization with many hundres jof metres of
untested strike potential and new targets identified.
Managing Director
Paul Ingram
Non-Executive Director
Markus Elsasser
Non-Executive Director
Felicity Gooding
Non-Executive Director
Bernard Crawford
Company Secretary
New Exploration Licences
Seven-fold increase in land holding at Broken Hill to
517 sq km following the recent high grade base and precious
metals discoveries.
2. COMMONWEALTH Au-Ag-Base Metal PROJECT, N.S.W.
(Impact 100%)
At least three south plunging ore shoots identified in drill
assay data and new down hole EM data.
www.impactminerals.com.au
a 26 Richardson Street
West Perth
Western Australia 6005
t +61 (8) 6454 6666
f +61 (8) 6454 6667
e info@impactminerals.com.au
All three shoots are undrilled at depth and open, in particular below a previous
Impact drill intercept of:
4 m at 41.8 g/t (1.3 ounces per tonne) gold, 93 g/t silver (3 ounces per tonne), 5.5%
zinc and 2.3% lead.
Gravity data directly detects known high grade massive sulphide mineralization at
Main Shaft and identifies possible depth extension.
Gravity data also identifies three new nearby targets for massive sulphide
mineralization.
Potential for significant expansion of the Inferred Resource of 100,000 gold
equivalent ounces.
Ongoing interpretation of new gravity and IP data over Silica Hill, Doughnut and
Welcome Jack in progress with encouraging results.
Planning in progress for major drill campaign for this Quarter.
3. MULGA TANK Ni-Cu-PGE PROJECT, W.A. (Impact 100%)
A review and synthesis of previous drill hole assay data was commenced.
4. CORPORATE
Minderoo executive, Felicity Gooding, appointed to the Board.
New Company Secretary, Bernard Crawford, appointed.
Cash balance at the end of the Quarter was $3.1 million.
1. BROKEN HILL PGM-Ni-Cu PROJECT, N.S.W. (Impact 100%)
1.1
High Grade Drill Results from Platinum Springs
Very high grade platinum, palladium, nickel and copper assays were returned from a 0.6 metre
thick unit of massive sulphide intersected in Hole PSD02 at the Platinum Springs Prospect
located about 20 km north east of Broken Hill (Figure 1).
Figure 1. Impact’s licences in the Broken Hill Project covering 517 square kilometres
The hole returned:
0.6 metres at 11.5 g/t platinum, 25.6 g/t palladium, 1.4 g/t gold,
1.3 g/t rhodium, 1.7 g/t iridium, 2.0 g/t osmium and 0.8 g.t ruthenium
7.6% copper, 7.4% nickel and 44.3 g/t silver from 57.1 metres down hole
within a broader intercept of
2.75 metres at 3.5 g/t platinum, 7 g/t palladium, 0.4 g/t gold, 2% copper, 1.9% nickel
and 11.6 g/t silver from 55 metres down hole.
PSD02 was drilled to test a narrow and strongly conductive (>5,000 siemens) electromagnetic
(EM) conductor identified by Impact in a down hole survey of a previous drill hole (Figure 2). A
down hole survey of PSD02 confirmed that the massive sulphide is the source of the conductor.
The massive sulphide unit occurs at the base of an ultramafic unit at the contact with underlying
metasedimentary rocks and is interpreted as being magmatic in origin. That is, the sulphides
have crystallised from the ultramafic magma. This is a key component of models for the
formation of large PGM-copper-nickel sulphide deposits and is very encouraging for the
possible future discovery of a major orebody in the region.
The EM conductor was also in part identified by a ground EM survey completed by Impact late
last year. Initial interpretation of this data suggests further EM conductors may be present to
the east and possibly to the north west of PSD02 (Figure 3). These are targets for follow up
work.
Detailed field mapping and a soil geochemistry survey covering an area of 800 metres by
700 metres centred on PSD02 were completed during the Quarter. The soil geochemistry
results have been received and are being interpreted.
Very high grade PGM-copper-nickel drill assays have now been returned from two prospects at
Impact’s Broken Hill Project, Platinum Springs and Red Hill.
These are the only two prospects to have been explored in detail and this is encouraging for
further exploration throughout the entire project area. For example, high grade rock chip
samples have been returned from numerous prospects between the Platinum Springs and
Moorkai Prospects, a distance of about 9 km along the Moorkai Intrusive Complex (Figure 4).
Apart from a few drill holes, none of these areas have been followed up in detail and a follow up
work programme is being designed for the entire Moorkai Intrusive Complex.
Figure 2. Geology and location of PSD01 and PSD02, previous drill holes and contoured data of
previous drill assays for platinum, palladium and gold (summed from down hole intervals).
Figure 3. Image of late time EM data over the Platinum Springs Prospect showing
the location of Impact drill holes PSD01 and PSD02.
The warm colours show areas of high conductivity and suggest that a conductive unit
or units extend east-west close to PSD02. These are areas for follow up work.
Figure 4. Rock chip samples results from the Moorkai Intrusive Complex
1.2
High grade zinc-silver-lead results at Dora East
Further very high-grade zinc-silver and significant lead assays, were returned from the Dora
East Prospect.
The Dora East Prospect was previously part of the Red Hill Prospect but has now been
separately defined as a key prospect in its own right.
The new assays for Hole RHD020 completed in late 2015 returned an intercept of:
7 metres at 7% zinc, 1.1% lead and 20.7 g/t silver from 131 metres including
1.6 metres at 22.0% zinc, 3.6% lead and 66.7 g/t silver from 132.4 metres (Figures 5 and 6).
In addition, a zone of good copper and silver grades has been identified that returned:
0.7 metres at 2.4% copper and 22.5 g/t silver from 109.5 metres (Figures 5 and 6).
Figure 5. Geology and Drill Hole Location for the Dora East and Red Hill Prospects.
This is now Impact’s third hole at the Dora East Prospect to return robust widths and grades of
so-called “Broken Hill-style mineralisation” which comprises zinc, lead, silver and copper
hosted by “Lode Rocks” similar to those that surround, and are integral to, the nearby world
class Broken Hill 300 million tonne zinc-lead-silver deposit.
The Lode Rocks comprise garnet-bearing metasedimentary rocks and amphibolite units
(Figures 5 and 6).
Hole RHD020 was drilled up dip from previous very high grade intercepts in Hole RHD018
and 200 metres along trend from Hole RHD09 which returned a thick intercept of lower
grade mineralisation (Figures 5 and 6).
Figure 6. North-South Cross Section for Holes RHD020 and RHD018 looking west.
Hole RHD018 returned:
5.1 metres at 10% zinc, 0.8% lead, 40.4 g/t silver from 148.4 metres including
1 metre at 26.8% zinc, 2.8% lead, 133 g/t silver (4 ounces) from 148.9 metres; and
1 metre at 21.4% zinc, 0.8% lead and 31.5 g/t silver (1 ounce) from 152.5 metres.
The zinc-silver-lead grades are interpreted to be increasing at depth whereas the copper
grades are interpreted to be increasing towards the surface. The area up dip of Hole RHD020
has also been identified as an off hole EM conductor and is an immediate drill target (Figure
6).
Hole RHD09 returned:
82 m at 0.3% zinc, 0.15% lead and 1.5 g/t silver including
0.8 m at 4.2% zinc, 4.5% lead and 18.6 g/t silver.
The mineralisation is open along strike and up and down dip and there are many hundreds of
metres of trend that remain to be drill tested (Figures 5 and 6).
Priority Base Metal Target Identified In Major Fold Hinge
Recent detailed mapping and interpretation of geophysical data by Impact indicates that the
Lode Rocks at Dora East are part of a large fold structure that plunges to the south west
(Figure 5).
Fold hinges of this scale are common hosts to thick ore positions at the Broken Hill mine. For
comparison Figure 7 shows a cross section from the Broken Hill mine that demonstrates how
laterally continuous narrow units of sulphide become thicker in the hinge zones of folds. The
fold hinge identified by Impact is a priority target for follow up work including drilling.
In addition, an Induced Polarisation anomaly was identified in this area by Impact in a survey
completed several years ago (Figure 5). The significance of the anomaly was not clear at the
time. However in light of Impact’s recent work this is now a compelling target for disseminated
Broken Hill style mineralisation.
These results are all extremely encouraging for the discovery of a significant zinc-lead-silver
deposit at Dora East. In particular, the mineralisation discovered may represent a halo to a
larger massive zinc sulphide body along trend or at depth.
Further drilling is warranted and a follow up work programme to include ground geophysical
surveys is being designed. This work will be carried out as part of the follow up work around the
Red Hill Prospect for high grade PGM-nickel-copper mineralisation.
Zn-Pb-Ag ore
Cross section of Broken Hill lode system at its southerly end
(Zinc Corporation Ltd) showing structure in relation to eastdipping axial planes.
Figure 7. Cross- section through the Broken Hill Mine showing the relationship between fold
hinges and thick ore positions (black areas). The fold hinges are commonly several hundred
metres below surface.
About the Dora East and Red Hill Prospects
Impact has now shown that the adjacent Red Hill and Dora East Prospects contain robust widths
and grades of 12 different metals: platinum, palladium, gold, rhodium, iridium, osmium,
ruthenium, nickel, copper, zinc, silver and lead.
This is unprecedented in the Broken Hill region and indicates the highly unusual and very
prospective nature of this part of Impact’s project area.
The Dora East and Red Hill Prospects lie within EL7390. Impact owns 80% of the rights to
Broken Hill style mineralisation on this licence in joint venture with Silver City Minerals Limited.
The style of mineralisation is distinct from the platinum-copper-nickel mineralisation
associated with ultramafic rocks that has been the focus of Impact’s work at the project and for
which Impact owns 100% of the rights.
Accordingly, in order to prevent confusion, the western part of the Red Hill Prospect that is
prospective for the Broken Hill style mineralisation, has been renamed the Dora East
Prospect (Figure 5). The prospect is so named because of several small dormant workings
within lode rocks and located a few hundred metres to the west on an adjacent tenement
that are called Dora.
1.3
New Exploration Licence Applications
Impact lodged, in March, two new exploration licence applications that have significantly
expanded the Company’s exploration footprint at Broken Hill sevenfold to 517 square
kilometres (Figure 1).
Recent technical work on the nature of the high grade platinum group metal (PGM)-coppernickel mineralisation and high grade zinc-lead-silver mineralisation discovered by Impact at
its various prospects within the project, including Red Hill, Dora East and Platinum Springs,
has identified the new licence areas as highly prospective for similar styles of mineralisation.
1.4 Next Steps at Broken Hill
Further work at Broken Hill is progressing on three fronts:
1. Design of follow-up drill programmes at Red Hill for PGM-copper-nickel mineralisation
and at Dora East for zinc-lead-silver mineralisation.
At the Red Hill prospect, Impact has discovered some of the highest reported drill assays
in Australia for platinum group metals with a standout intercept in RHD012 of:
1.2 metres (true width) at:
10.4 g/t platinum, 10.9 g/t gold, 294 g/t (9.5 ounces) palladium,
4.6 g/t rhodium, 7.2 g/t iridium, 5.6 g/t osmium and 3.1 g/t ruthenium,
7.4% nickel, 1.8% copper and 19 g/t silver.
2. Synthesis and interpretation of recently completed soil and rock chip sampling surveys
and geological mapping at the Platinum Springs and Little Darling Creek prospects to
identify target areas for further work (Figure 8).
3. Synthesis and interpretation of previous exploration data within the new exploration
licence applications.
Full details of these drill results can be found in Impact’s previous ASX announcements
(3 February 2016, 8 December 2015 and 23 October 2015).
1.5 About the Broken Hill Project (see also announcement dated 23rd October 2015)
The Broken Hill Project comprises two granted exploration licences (EL7390 and EL8234) and
two exploration licence applications (ELA5793 and ELA5265) that cover 517 square kilometres of
rocks prospective for two distinct styles of mineralisation:
1. PGE-copper-nickel associated with ultramafic rocks; and
2. Zinc-lead-silver in “Broken Hill-style” deposits hosted mostly by metasedimentary rocks
and amphibolites.
Impact owns 100% of three of the licences. The mineral rights for the fourth licence, EL7390,
were split in the early 2000’s into the two different styles of mineralisation. Impact recently
acquired EL7390 from Golden Cross Resources Limited and this entitles Impact to:
100% of the PGE-copper-nickel mineralisation; and
80% of the zinc-lead-silver Broken Hill-style mineralisation in EL7390 in joint venture
with Silver City Minerals Limited (ASX: SCI). Impact will free-carry Silver City’s 20%
interest to a Decision to Mine.
Golden Cross has a 1% gross production royalty on all metals to which Impact has rights for.
Impact, at its election, also has the right to buy back the royalty for $1.5 million at anytime up to
a Decision to Mine, or leave the royalty uncapped during any production.
The Broken Hill and Commonwealth Projects are both part of the investment agreement
between Impact Minerals and Squadron Resources Pty Ltd, part of the Minderoo Group which
represents the philanthropic and business interests of Andrew and Nicola Forrest (see
announcement 17 July 2015).
As part of the investment agreement, Squadron at its sole discretion, can invest a further
A$1 million into either or both the Commonwealth and Broken Hill platinum projects, to earn a
19.9% interest after Impact has spent a combined total of $2.5 million on the two projects.
At Broken Hill, Squadron Resources Pty Limited only has the right to invest $1 million for a
19.9% interest in the nickel-copper-PGE rights on EL7390 and a 19.9% interest in EL8234.
Squadron is not liable for any payment of the royalty to Golden Cross.
It is anticipated that Impact will meet the $2.5 million expenditure target in the September
Quarter 2016.
Squadron Resources Pty Limited does not have the right to earn into the Broken Hill style
mineralisation on EL7390 and Impact’s licences ELA5793 and ELA5265 are excluded from the
Squadron transaction.
2. COMMONWEALTH GOLD-SILVER-BASE METAL PROJECT (IPT 100%)
The Commonwealth Project comprises three exploration licences that cover about 315 sq km
of the highly prospective Lachlan Fold Belt about 100 km north of Orange in NSW. The belt is
host to many major gold-silver-copper mines including the Cadia-Ridgeway deposits that
contain at least 25 million ounces of gold and 5 million tonnes of copper (Figure 8).
A significant amount of work was completed during the Quarter in preparation for a major
drill programme of up to 3,000 m of RC and diamond drilling likely to start in May. The
programme will test a number of geophysical and geochemical targets at the
Commonwealth deposit, as well as the Welcome Jack, Silica Hill and Doughnut Prospects.
Figure 8. Location of the Commonwealth Project within the Lachlan Fold Belt of NSW, home
to many significant gold and copper mines.
During the Quarter a review and synthesis of data of drill hole assays, two down-hole
electromagnetic (EM) surveys and a ground gravity survey over the Commonwealth deposit
identified a number of new targets for drilling.
2.1 Three Ore Shoots with High Grade Drill Assays that are Open at Depth
New three dimensional modelling of the drill hole assay data indicate that there are potentially
at least three ore shoots within the Commonwealth deposit that have a previously unrecognised
plunge to the south: one at Main Shaft and two at Commonwealth South (Figure 9). The downplunge extensions of these shoots have not been drilled.
At Main Shaft the mineralisation occurs as massive sulphides that contain gold and silver
together with zinc, lead and iron sulphides (sphalerite, galena and pyrite) and lesser copper
sulphide (chalcopyrite).
The drill assay and down hole EM data indicate that the mineralisation is open to the south in
particular beneath Hole CMIPT021 that returned an intercept of 8.1 m at 6 g/t gold, 193 g/t
silver, 5.9% zinc and 2.3% lead (see announcement 19 February 2015).
Figure 9. 3D View looking to the north west of the Commonwealth resource (grey outline) and
showing:
grade shells for gold (yellow = 1g/t, red/orange = 2 g/t) and copper (green = 500 ppm copper)
from drill assay data; interpreted EM conductors (blue rectangles) and interpreted ore
shoots (dashed lines). The down plunge extensions of these shoots have not been drilled and
are priority drill targets.
In the two shoots at Commonwealth South, the majority of the mineralisation occurs as veins
and disseminations of gold and silver-rich zinc and lead sulphides. However in its maiden drill
programme at the project, Impact discovered what could be the edges of two new separate
lenses of massive and semi-massive sulphide at the edge of the deposit. These two lenses also
help define the two ore shoots (Figure 9 and see announcement 22 September 2014).
In the southern most ore shoot, Hole CMIPT017 returned a very high grade intercept at the edge
of the deposit of:
4 m at 41.8 g/t (1.3 ounces per tonne) gold, 93 g/t silver (3 ounces per tonne),
5.5% zinc and 2.3% lead from 90 metres down hole.
A down hole EM survey identified a modest small conductor located just south of this intercept
within the interpreted southern shoot and this is a drill target (Figure 9).
In the central shoot, Hole CMIPT014 returned two high-grade drill intercepts in massive
sulphide of:
2 m at 6.7 g/t Au, 61.6 g/t Ag, 3.8% Zn, 3.2% Pb from 53 metres; and
4 m at 6.0 g/t Au, 25 g/t Ag, 1.4% Zn, 0.3% Pb from 72 metres down hole.
This was the first significant discovery of two massive sulphide lenses at Commonwealth and
they occur immediately above and below a prominent unit of rhyolite. Prior to this, massive
sulphide mineralisation had only been found above the rhyolite. The mineralisation is open at
depth (Figure 9).
All three shoots will be tested in the upcoming drill programme.
2.2 Further Depth Potential and New Targets for Massive Sulphide Identified in Ground Gravity
Data
Massive sulphide bodies, such as at Main Shaft, are commonly very dense and are ideally suited
for exploration by the gravity method which measures the relative density of rocks.
Accordingly a ground gravity survey covering an area of about 3 square kilometres has been
completed over the Commonwealth deposit and surrounding areas at a station spacing of
200 metres by 25 metres or 50 metres.
At Commonwealth, detailed geophysical modelling and density measurements taken by
Impact on mineralised core show that the gravity survey has successfully directly detected
the massive sulphide mineralisation at Main Shaft (Figures 10 and 11)
Figure 10. Image of ground gravity data over the Commonwealth resource and immediate
surrounding area with warmer colours indicating areas underlain by more dense rocks.
There is a coincidence of the gravity anomaly with the massive sulphide mineralisation at
Main Shaft at the northern end of the resource. Three other areas of similar density have
also been identified.
This information has been used to calibrate the gravity data to identify bodies of similar density.
From this, four new targets for massive sulphide mineralisation have been identified in and
around the Commonwealth resource (Figures 11 and 12):
1. 150 metres east of the Commonwealth deposit;
2. At depth below Commonwealth South. Modelling of the gravity data suggests a
moderately dense body may be present down to at least 250 m below surface in an area
not tested below 100 metres below surface;
3. 250 metres south west of the Commonwealth deposit; and
4. 400 metres west of the Commonwealth deposit.
The first three targets will be tested in the upcoming drill programme. Further work is
required at the fourth target to determine its significance.
Figure 11. 3D view looking north west of the gravity data following a mathematical inversion
process that identifies bodies of similar density. The colours represent shells or surfaces of the
same density with the smaller more dense shells shown in the purple-pink colour and slightly
less dense larger shells in the burgundy red colour. The Commonwealth deposit as shown in
Figure 9 is shown for reference. Note the coincidence of a dense body with the massive sulphide
mineralisation at Main Shaft and bodies of similar density that are targets for drilling.
2.3 Next Steps
An interpretation of ground gravity data, induced polarisation data and soil geochemistry data is
in progress at the Silica Hill, Doughnut and Welcome Jack Prospects. Initial indications are that
further drill targets will be identified.
A programme of up to 3,000 metres of Reverse Circulation (RC) and diamond drilling and
scheduled to start within the next 6 to 8 weeks. This will test a significant number of targets
within these four prospects.
In addition, given the success of gravity data in identifying the massive sulphide
mineralisation at Main Shaft, a further ground gravity survey is underway that will extend
coverage to about 8 square kilometres centred on the Commonwealth deposit.
About the Commonwealth Mineral Resource Estimate
The Inferred Resource at Commonwealth, prepared in accordance with the JORC 2012 Code
by independent resource consultants Optiro at a 0.5 g/t gold cut off, is:
720,000 tonnes at 4.5 g/t gold equivalent for a contained 110,000 gold equivalent ounces
comprising 2.8 g/t gold, 48 g/t silver, 1.5% zinc, 0.6% lead and 0.1% copper.
The resource, which is open along trend and at depth, contains both massive sulphide
mineralisation at the Main Shaft prospect and disseminated, vein and lesser massive
sulphide mineralization at the Commonwealth South prospect. It extends from surface to an
average depth of 90 m, has a strike length of 400 m and is up to 25 m thick.
A separate Inferred Mineral Resource (included within the overall resource) has also been
calculated for the massive sulphide lens at Main Shaft alone to demonstrate the high grade
nature of such deposits that are the principal target for Impact’s exploration programme.
The Main Shaft Inferred Resource is:
145,000 tonnes at 9.3 g/t gold equivalent for a contained 47,000 gold equivalent ounces
comprising 4.3 g/t gold, 142 g/t silver, 4.8% zinc, 1.7% lead and 0.2% copper.
The Commonwealth deposit comprises two areas, Main Shaft and Commonwealth South. The
mineralisation at Main Shaft is typical of a volcanogenic massive sulphide (VMS) type system,
containing high grade gold, silver, zinc, lead and copper mineralisation which occurs at the
upper contact of a rhyolite unit with the overlying volcanic sedimentary rocks. Mineralisation
at Commonwealth South occurs at both the upper and lower contacts of the rhyolite and is
dominated by 1-50 mm thick stringers and disseminations of sulphide, often associated with
intense brecciation and faulting of the rhyolite.
The Commonwealth Resource strike length is 400 m and it is open along trend in particular
to the south. The mineralisation has been defined to a maximum depth of 150 m and is still
open.
Twenty one new holes were drilled by Impact in 2014. The total number of holes into the
Commonwealth project is 108, comprising 49 reverse circulation (RC) holes, 45 diamond
holes, 10 underground channel samples and four underground drill holes. Of these holes, 52
intersected the mineralisation wireframe and were used in the estimation. Although some of
the holes are from previous explorers, Impact has twinned some of the higher grade
intersections and these have largely confirmed the grades and widths.
Quality control measures employed during Impact’s drill programme included the use of
certified standards (1% of total sample population), field duplicates (2% of total sample
population) and blanks (2% of total sample population). No previous quality
assurance/quality control (QAQC) has been carried out at the Commonwealth Project.
Analysis of the standards and blanks showed acceptable to good levels of accuracy in the
assaying and little contamination. The duplicate samples matched the originals with a high
degree of precision.
The drill hole database was reviewed and validated by Optiro. Three-dimensional solid
wireframes were constructed from sectional interpretations of the mineralisation using a
nominal 0.5 g/t gold cut-off grade. Drill hole intercepts were composited downhole to 1 m
lengths and gold, silver, copper, zinc, lead and arsenic grade estimation was carried out
using ordinary kriging with hard boundaries.
Three search passes, with increasing search distances and decreasing minimum sample
numbers, were employed to fully inform the model. Less than 1% of blocks were not filled in
the first three passes. Further estimation passes were run to assign mean grades to unestimated blocks.
The Commonwealth Mineral Resource estimate has been classified as an Inferred Mineral
Resource in accordance with the guidelines of the Australasian Code for the Reporting of
Exploration Results, Mineral Resources and Ore Reserves (the JORC Code, 2012). Mineral
Resources have been classified on the basis of confidence in geological and grade continuity,
geological modelling confidence, grade continuity and limited QAQC. No Measured or
Indicated Mineral Resources have been defined.
The Mineral Resource estimate for the Commonwealth Project has been reported above a
0.5 ppm gold cut-off grade. The estimate has been depleted for previous historic mining.
Grades have been reported as individual elements (gold, silver, zinc, lead and copper) and, in
addition, a gold-equivalent grade has been defined. This has used the following Australian
dollar commodity prices:
Gold $1588/ oz; Silver $19.55/ oz; Copper $2.87/lb; Lead $1.03/lb; Zinc $1.10/lb.
There has been no metallurgical testing of the Commonwealth mineralisation to date so no
metallurgical recoveries have been incorporated into the gold equivalent calculation. This is
commensurate with the classification of the Commonwealth prospect as an Inferred Mineral
Resource.
3. MULGA TANK NICKEL-COPPER-PGE PROJECT (IPT 100%)
Impact owns 100% of 13 exploration licences that cover 425 sq km of the highly prospective
Minigwal greenstone belt, 200 km east of Kalgoorlie in the emerging mineral province of the
south east Yilgarn Block, Western Australia (Figure 12).
Exploration for nickel and gold was re-invigorated on the project in mid 2015 with the
completion of three major surveys: an airborne magnetic and radiometric survey covering
most of the 425 sq km project area; an innovative combined ground and airborne electrical
survey and the collection of 2,500 soil geochemistry samples (yet to be analysed).
During the Quarter a review and synthesis of previous drill hole assay data was commenced.
About the Mulga Tank Project
Impact has discovered three styles of nickel sulphide mineralisation within the Mulga Tank
Dunite and surrounding rocks (see announcement dated 29th January 2014):
1. High tenor veins at the base of the Mulga Tank Dunite with drill results of:
0.25 m at 3.8% nickel, 0.7% copper and 0.7 g/t PGE and 0.3 m at 0.7% nickel.
2. High tenor nickel sulphide in multiple komatiites in a flow channel with drill results
of:
0.75 m at 0.85% nickel, 0.35% copper and 0.28 g/t PGE (Pt+Pd+Au); and
6.7 m at 0.5% nickel.
3. Extensive disseminated nickel in the Mulga Tank Dunite with drill results of:
2 m at 1.3% nickel including 1 m at 2% nickel and multiple zones of
0.5 m at 0.5% to 1.2% nickel within an intercept of 115 m at 0.3% nickel;
other thick intercepts of 21 m at 0.4% nickel and 59 m at 0.3% nickel.
The style of mineralisation and the nature of the ultramafic rocks are similar to those that
host the significant nickel deposits found at the Perseverance (45 Mt at 2% nickel), Rocky’s
Reward (9.6 Mt at 2.4% Ni) and Mt Keith >2 Mt of contained nickel) mines near Leinster in
Western Australia (Figure 12).
Impact’s results come from one 15 sq km area within a very large greenstone belt that
extends for 20 km along strike and which has not been explored for nickel. The area is also
highly prospective for gold deposits similar to the recent discovery at Gruyere (> 5 Moz of
contained gold) (Figure 12).
Figure 12. Location of the Mulga Tank Project and significant nickel sulphide mines
and prospects including Perseverance and Rocky’s Reward and with new nickelcopper-PGE discoveries in the emerging nickel-copper province to the east.
4. CORPORATE
4.1 Minderoo Executive Appointed to Impact Board
Ms Felicity Gooding was appointed as a non-Executive Director of
Share your feedback
Discover