Quarterly Reports December 2015
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 29 January 2016
No. 448/290116
DECEMBER 2015 QUARTERLY REPORT
Market Cap
A$19.13m (0.027 p/s)
SUMMARY
1. BROKEN HILL PROJECT, N.S.W. (Impact 100% and 80%)
1,900 m drill programme completed at Red Hill.
Issued Capital
708,679,401
- Continued high grade Pt+Pd_Au results:
3.3 metres at 7.4 g/t Pt+Pd+Au in RHD014
3.9 metres at 8.3 g/t Pt+Pd+Au
1.4% copper, 0.3% nickel and 19 g/t silver
including
0.5 metres at 20.6 g/t Pt+Pd+Au
5.2% copper, 0.7% nickel and 50 g/t silver in RHD015
Directors
Peter Unsworth
Chairman
16 metres at 2.9 g/t Pt+Pd+Au
0.3% copper, 0.3% nickel, 9 g/t silver in RHD017
Dr Michael Jones
6.3 metres at 4.3 g/t Pt+Pd+Au
0.9% copper, 0.5% nickel and 13.8 g/t silver in RHD019
Paul Ingram
Discovery of significant Broken Hill style mineralization
including exceptional zinc-lead-silver grades in RHD018:
1 metre at 26.8% zinc, 2.8% lead, 133 g/t (4 ounces) silver; and
1 metre at 21.4% zinc, 0.8% lead, 31 g/t (1 ounce) silver
82.5 metres at 0.3% zinc, 0.2% lead and 1.5 g/t silver
including
2.9 metres at 2.8% zinc, 0.4% lead and 3.7 g/t silver
in RHD09
Managing Director
Non-Executive Director
Markus Elsasser
Non-Executive Director
Aaron Hood
Non-Executive Director
James Cooper-Jones
Company Secretary
0.3 metres at 4.2% copper, 114 g/t (3 ounces) silver,
0.2 g/t gold, 0.1% zinc and 0.1% lead in RHD016
www.impactminerals.com.au
Maiden drill programme completed at Platinum Springs.
- 60 cm thick unit of massive nickel-copper-sulphide
intersected. Assays expected next week.
a 26 Richardson Street
West Perth
Western Australia 6005
t +61 (8) 6454 6666
f +61 (8) 6454 6667
e info@impactminerals.com.au
Ministerial approval received for acquisition of E7390 giving Impact 100% of the
PGM-nickel-copper rights and 80% of the zinc-lead-silver rights.
Follow up ground geophysical surveys, mapping and sampling to continue in Q1
2016.
2. COMMONWEALTH Au-Ag-Base Metal PROJECT, N.S.W. (Impact 100%)
A mapping and soil sampling programme of 319 samples completed east of the
Commonwealth Mine including the Welcome Jack, Stringers and Walls Prospects.
A review of the previous downhole and ground EM surveys and new downhole
surveys in three holes has identified two new modest conductors close to the
Commonwealth deposit.
A study of the alteration minerals and geochemistry around the Commonwealth
deposit has identified a possible outer halo that extends up to 10’s of metres away
from the mineralisation and may provide a vector to ore.
An interpretation of a ground gravity survey has identified a number of high density
anomalies that may represent possible massive sulphide bodies.
Preliminary metallurgical test work on the Commonwealth ore using the Kell
Process indicates encouraging recoveries for both precious and base metals.
3. MULGA TANK Ni-Cu-PGE PROJECT, W.A. (Impact 100%)
Detailed interpretation and synthesis of geophysical and geochemical data is in
progress.
4. CORPORATE
Cash balance at the end of December 2015 Quarter: $4.1 million.
1. BROKEN HILL PLATINUM-NICKEL-COPPER PROJECT, N.S.W.
(Impact 100% OF PGM-Ni-Cu rights)
Impact’s maiden drill programme at the Platinum Springs Prospect and a follow up drill
programme at the Red Hill Prospect were completed during the Quarter.
A 60cm thick unit of massive nickel-copper sulphide was intersected at Platinum
Springs (assays expected next week) and further high grade platinum group metal
(PGM)-copper-nickel mineralisation as well as a first significant intercept of
zinc-lead-silver mineralisation were returned from Red Hill.
1.1 Massive Sulphide at Platinum Springs
A 60 cm thick unit of massive sulphide containing extensive copper and nickel
sulphides was intersected in Hole PSD02 at the Platinum Springs Prospect located
about 20 km north east of Broken Hill.
The massive sulphide unit is close to previous high grade PGM-nickel-copper
intersected in massive sulphide in two drill holes completed by previous explorers
(Figure 1 and see announcement dated 11 November 2015). These previous drill
holes, which were not surveyed and whose precise location is unknown, returned:
2 metres at 10.9 g/t platinum, 23.6 g/t palladium, 0.9 g/t gold,
6.1% copper, 4.5% nickel and 35 g/t silver from 45 metres in Hole DD4; and
2.3 metres 8.4 g/t platinum, 3.6% copper and 3% nickel from 47.7 metres; including
0.9 metres at 18.8 g/t platinum, 8.1% copper and 7.5% nickel from 48.2 metres in
Hole GMS-06
(palladium and gold not assayed).
The massive sulphide unit occurs at the base of the host ultramafic unit (green unit
at top of photograph) at the contact with underlying metasedimentary rocks and are
interpreted as being magmatic in origin.
Holes PSD01 and PSD02 were drilled to test an electromagnetic (EM) conductor
identified by Impact during the Quarter in a down hole survey of a previous drill hole
(Figure 1). The anomaly was modelled to be a narrow and strongly conductive
(>5,000 siemens) unit.
PSD02 confirmed that the massive sulphide unit is the source of the EM conductor.
The orientation and geometry of the EM conductor has proved difficult to model. An
EM survey of PSD02, has now been completed and the data is being processed
ready for interpretation.
Assays for PSD02 are expected in the first week of February.
Next Steps at Platinum Springs
The results of the down hole EM survey will be interpreted and integrated with the results of
ground EM surveys completed by previous explorers. Detailed mapping and sampling of the
area is in progress. This work will be used to design follow up work programmes.
Figure 1. Geology and location of PSD01 and PSD02, previous drill holes and contoured data of
previous drill assays for platinum, palladium and gold (summed from down hole intervals). The
location of previous drill holes DD4 and GSM06 with high grade intercepts is not known
precisely because collar positions were not surveyed and have been rehabilitated.
1.2 Further high grade PGM Copper-Nickel Assays at Red Hill
Good to extremely high grades of PGM-copper-nickel mineralisation over robust widths and
within 50 m of surface have been found in 10 out of the 11 drill holes completed by Impact at
Red Hill. The mineralisation is open along trend and at depth and further drilling is warranted.
During the Quarter assay results for all remaining holes were received including the
spectacular results from RHD012 and reported in the September Quarterly Report. In addition
assays were received for Holes RHD014, RHD015, RHD017, RHD019 and RHD010.
Drill hole RHD014 tested the western part of the ultramafic unit at Red Hill and underlying
metasedimentary rocks (Figure 2, Table 1). The hole returned:
25.4 metres at 0.6 g/t platinum, 1.3 g/t palladium and 0.1 g/t gold (2.0 g/t Pt+Pd+Au),
0.3% copper and 0.3% nickel from 11 metres down hole; including
3.3 metres at 2.1 g/t platinum, 4.9 g/t palladium and 0.4 g/t gold (7.4 g/t Pt+Pd+Au),
0.7% copper and 0.6% nickel from 32.4 metres down hole.
The mineralisation occurs within and immediately below the host ultramafic intrusion and also
within a layer of metasedimentary rocks several metres thick within the ultramafic. The hole is
close to similar near-surface mineralisation intersected in Hole RHD002 (16 metres at 1.4 g/t
Pt+Pd+Au, 0.2% copper and 0.3% nickel, see announcement dated 23 January 2015).
Figure 2. Geology and drill hole locations at Red Hill showing the seven significant assays of the
2016 drill programme in holes RHD008, 012, 014, 015, 016, 017 and 019 (in yellow call out box).
Drill hole RHD015 tested the eastern part of the ultramafic unit at Red Hill and underlying
metasedimentary rocks (Figure 2, Table 1). The hole returned:
3.9 metres at 4.2 g/t platinum, 3.8 g/t palladium and 0.3 g/t gold (8.3 g/t Pt+Pd+Au),
1.4% copper and 0.3% nickel from 58.1 metres down hole; including
0.5 metres at 14.2 g/t platinum, 6.2 g/t palladium and 0.2 g/t gold (20.6 g/t Pt+Pd+Au),
5.2% copper and 0.7% nickel and 50 g/t (1.6 ounces) silver from 60.1 metres down hole.
Drill hole RHD017 was designed to test a small conductor identified in a down hole EM survey in
Hole RHD012 that returned extremely high grade PGM-copper-nickel-silver mineralisation (see
announcement dated 23 October 2015 and Figure 3). Although no explanation for the conductor
was found, the hole intersected a zone of mineralisation that returned:
16 metres at 1.4 g/t platinum, 1.4 g/t palladium, 0.1 g/t gold (2.9 Pt+Pd+Au)
0.3% copper, 0.3% nickel and 8.7 g/t silver from 39 metres down hole; including
1.7 metres at 3.6 g/t platinum, 3.9 g/t palladium, 0.2 g/t gold (7.7 g/t Pt+Pd+Au)
0.6% copper, 0.4% nickel and 20 g/t silver from 41.9 metres down hole; and also including
0.6 metres at 3.2 g/t platinum, 3.9 g/t palladium, 0.1 g/t gold (7.3 g/t Pt+Pd+Au)
1.7% copper, 0.8% nickel and 80 g/t (2.6 ounces) silver from 43.6 metres down hole.
The mineralisation in both RHD015 and 017 is associated with a single ultramafic dyke within
the metasedimentary rocks.
A down hole EM survey of RHD017 refined the position of the conductor and Hole RHD019 was
drilled to test this conductor. Again, no explanation for the conductor was found. However a
zone of weathered copper-nickel mineralisation associated with an ultramafic dyke was
intersected at about 40 metres down hole. The zone returned:
12.7 metres at 0.9 g/t platinum, 1.4 g/t palladium, 0.5 g/t gold (2.4 g/t 3PGM)
0.5% copper, 0.3% nickel and 9.5 g/t silver; including
6.3 metres at 1.6 g/t platinum, 2.5 g/t palladium, 0.3 g/t gold, (4.3 g/t 3PGM)
0.9% copper, 0.5% nickel and 13.8 g/t silver from 37.4 metres; and including
0.5 metres at 10 g/t platinum, 11.1 g/t palladium, 0.6 g/t gold (21.7 g/t 3PGM),
1% copper, 0.5% nickel and 41.5 g/t silver (1.3 ounces) from 37.4 metres.
Assays were also returned from Hole RHD010 drilled to test the north east part of the main Red
Hill intrusion. Numerous anomalous platinum and palladium assays of between 10 and
220 parts per billion were returned from the upper 60 metres of the unit. This confirms the
relatively high background levels of these metals in these ultramafic rocks, which are normally
less than 10 parts per billion in similar rocks around the globe, and is encouraging for the
formation of deposits of PGM’s.
A synthesis and interpretation of all the data from Red Hill is now in progress with the aim of
identifying follow up drill targets. A detailed ground IP survey will be completed as part of this
work to help identify targets at depth beneath the mineralisation discovered thus far.
Figure 3. Cross section through the Red Hill Prospect.
1.3 High grade zinc-lead-silver mineralisation at Red Hill (Impact 80%)
Three drill holes at Red Hill also returned, for the first time, significant intercepts of zinc-leadsilver in so called “Broken Hill-style mineralisation” hosted by “Lode Rocks” similar to those
that surround, and are integral to, the world class Broken Hill zinc-lead-silver deposit located
15 km north west of Red Hill.
The style of mineralisation is distinct from, and separate to, the platinum-copper-nickel
mineralisation associated with ultramafic rocks that has been the focus of Impact’s work thus
far at the project.
In Hole RHD018, the Broken Hill-style Lode Rocks comprise variably disseminated, vein and
massive iron, zinc, copper and lead sulphides hosted in garnet-bearing metasedimentary rocks
and two amphibolite units (Figure 5).
The lower amphibolite unit contains a five metre thick zone of massive and disseminated zinc
and lead sulphide mineralisation including two separate one metre intervals of high grade zinc
sulphides that returned (Figure 4):
5.1 metres at 10% zinc, 0.8% lead, 40.4 g/t silver from 148.4 metres including
1 metre at 26.8% zinc, 2.8% lead, 133 g/t silver (4 ounces) from 148.9 metres; and
1 metre at 21.4% zinc, 0.8% lead and 31.5 g/t silver (1 ounce) from 152.5 metres
High grade zinc sulphide (sphalerite – bronze metallic coloured mineral)
This high grade mineralisation lies within a thicker zone of lower grade mineralisation that
returned:
22.7 metres at 2.4% zinc, 0.2% lead and 9.5 g/t silver from 138.9 metres down hole.
The upper amphibolite and surrounding metasedimentary rocks contain a 30 metre thick zone
of patchy iron, copper, zinc and lead sulphides from about 100 metres down hole (Figure 2). One
zone of selectively sampled copper sulphide mineralisation within this thicker zone returned:
0.15 metres at 1.5% copper, 1.3% zinc and 22 g.t silver from 113.6 metres down hole.
A follow up drill hole, RHD020 successfully tested the up-dip extension of the mineralisation
(Figure 4). Assays are expected in early February.
Figure 4. North-south cross-section along RHD018 and RHD020, looking west.
Figure 5. Geology and drill hole locations in the greater Red Hill area.
Drill hole RHD009 was drilled to test a modest gravity anomaly immediately north west of the
main Red Hill intrusion (Figure 5). The hole intersected the lower contact of the ultramafic unit
with an underlying sequence of metasedimentary rocks including garnet bearing units,
amphibolites and pegmatites at 88.5 metres down hole.
A thick interval of disseminated and vein-hosted zinc and lead mineralisation occurs mostly
within the metasedimentary rocks and returned assays of:
82.5 metres at 0.3% zinc, 0.2% lead and 1.5 g/t silver from 91 metres down hole; including
0.8 metres at 4.1% zinc, 4.6 % lead and 18.6 g/t silver from 132 metres; and
2.9 metres at 2.8% zinc, 0.4% lead and 3.7 g/t silver from 141 metres.
This footwall sequence of rocks are part of a regional package of rocks colloquially called the
“Broken Hill Sequence” which are similar to the host rocks at the world class zinc-lead-silver
Broken Hill Mine. The sequence is prospective for similar mineralisation and two of these
sequences have been mapped at surface at Red Hill (Figure 5).
Drill hole RHD016 was also drilled to test the eastern part of the ultramafic unit and underlying
metasedimentary rocks. The hole intersected a 17 metre thick zone of variably anomalous base
and precious metals within metasedimentary rocks. Ultramafic rocks were not intersected.
The best intercept came from a narrow vein with visible copper sulphide that returned:
0.3 metres at 4.2% copper, 114 g/t (3 ounces) silver, 0.2 g/t gold,
0.1% zinc and 0.1% lead from 44.4 metres down hole.
The style and significance of this mineralisation in RHD016 is uncertain and detailed core
logging is in progress. However, the mineralisation may be in part related to Broken Hill-style
mineralisation. If this is the case, then zones where such mineralisation are cross-cut by the
ultramafic dykes may be good targets for high grade PGM-copper-nickel mineralisation.
These results are all extremely encouraging for the discovery of a significant zinc-lead-silver
deposit. In particular the mineralisation discovered may represent a halo to a larger massive
zinc sulphide body along trend or at depth.
Further drilling is warranted and a follow up work programme is being designed.
About the PGM mineralisation at Red Hill
At Impact’s Red Hill Prospect, PGM-copper-nickel mineralisation, including the rare PGM’s
rhodium, iridium, osmium and ruthenium has now been found from surface to a depth of at
least 50 metres over at least 50 metres of trend and which is open in several directions (see
announcements dated 23 October 2015 and 9 November 2015).
The width of the mineralised zones has yet to be established. However Hole RHD019 has
established that the strike of one of the main ultramafic units is NE. Thus the true widths of the
mineralised intercepts are likely to be thinner than quoted.
Significant structural and lithological (rock type) controls on the high-grade PGM-copper-nickel
mineralisation have been identified, in particular in
Hole RHD012 (see announcement dated 23 October 2015) that returned:
3.5 metres at 159 g/t (5.3 ounces) 6PGE+gold 2.9% nickel, 2.3% copper and
14.5 g/t silver from 67.3m down hole (50 m below surface)
where the 6PGE+gold equals
1.7 g/t rhodium, 2.6 g/t iridium, 2.0 g/t osmium and 1.1 g/t ruthenium
5 g/t platinum, 6 g/t gold, 144 g/t (4.6 ounces) palladium.
The mineralisation is related to dykes of ultramafic rock that have intruded along structures and
veins that cross-cut metasedimentary rocks and pegmatites (coarse quartz-feldspar rocks). The
fractures and veins that control the higher grade mineralisation are commonly better developed
in the more competent pegmatites and detailed logging and mapping of these units is in
progress.
About the Broken Hill Project (see also announcement dated 23rd October 2015)
The Broken Hill Project comprises three exploration licences that cover a 40 km trend of rocks
prospective for two distinct styles of mineralisation (Figure 6):
1. PGE-copper-nickel associated with ultramafic rocks; and
2. Zinc-lead-silver in “Broken Hill-style” deposits hosted mostly by metasedimentary rocks
and amphibolites.
Figure 6. Impact’s Broken Hill Project showing granted licences.
The mineral rights for one of the licences, E7390, were split in the early 2000’s into the two
different styles of mineralisation and these were the subject of two separate joint ventures
between the original licence owner, Golden Cross Resources, and Endeavour Minerals Pty
Limited and Silver City Minerals Limited respectively. Impact purchased Endeavour Minerals
Pty Limited in 2013.
Impact has now acquired E7390 (via its 100% owned subsidiary Siouville Pty Limited), from
Golden Cross Resources which entitles Impact to 100% of the nickel-copper-PGE rights,
previously in joint venture with Golden Cross.
Golden Cross has a 1% gross production royalty on all metals to which Impact and/or Siouville
has the rights for. At its election, Impact also has the right to buy back the royalty for $1.5
million at anytime up to a Decision to Mine, or leave the royalty uncapped during any production.
In addition, Impact has also moved to an 80-20 joint venture for Broken-Hill style mineralisation
on E7390 with Silver City Minerals Limited and free-carry Silver City’s 20% interest to a Decision
to Mine.
Squadron Resources Pty Limited has the right to invest $1 million for a 19.9% interest in the
nickel-copper-PGE rights under the terms of an investment into Impact as outlined in the
announcement to the ASX dated 17 July 2015. However, Squadron is not liable for any payment
of the royalty to Golden Cross.
Squadron Resources Pty Limited has no rights to earn into the Broken Hill style mineralisation.
2. COMMONWEALTH GOLD-SILVER-BASE METAL PROJECT (IPT 100%)
The Commonwealth Project comprises three exploration licences that cover about 315 sq km
of the highly prospective Lachlan Fold Belt about 100 km north of Orange in NSW. The belt is
host to many major gold-silver-copper mines including the Cadia-Ridgeway deposits that
contain 25 million ounces of gold and 12 million tonnes of copper (Figure 7).
A significant amount of work was completed during the Quarter with the aim of identifying
targets for a drill programme likely to be undertaken in Q2-Q3 2016.
A mapping and soil sampling programme of 319 samples was completed that has
extended the prospect area around the Commonwealth Mine eastwards by 1,000 m
and now includes the Welcome Jack, Stringers and Walls Prospects. The soil
samples will be submitted for assay in February.
A review of the previous downhole and ground EM surveys was completed and which
lead to new downhole surveys in three holes. This work has identified two new
modest conductors close to the Commonwealth deposit. Final interpretation is in
progress.
Figure 7. Location of the Commonwealth Project within the Lachlan Fold Belt of NSW, home
to many significant gold and copper mines.
A study of the alteration minerals and geochemistry around the Commonwealth
deposit was completed utilising an extensive database of assay data and
measurements from a handheld XRF instrument. Preliminary results indicate that
there is a possible outer halo that extends up to 10’s of metres away from the
mineralisation and which may provide a vector to ore.
An interpretation of a ground gravity survey carried out in early 2015 was completed.
A number of high density anomalies have been identified that may represent possible
massive sulphide bodies.
The results of preliminary metallurgical test work on the Commonwealth ore using
the Kell Process indicate encouraging recoveries for both precious and base metals.
All of the results of this work are being reviewed and synthesized and will be used to
prioritise areas for drilling. Detailed interpretations of the data will be released in due
course.
About the Commonwealth Project
On 19 February 2015 Impact announced a maiden Inferred Mineral Resource for the
Commonwealth project, prepared in accordance with the JORC 2012 Code by independent
resource consultants Optiro at a 0.5 g/t gold cut off, of:
720,000 tonnes at 2.8 g/t gold, 48 g/t silver, 1.5% zinc, 0.6% lead and 0.1% copper.
The resource, which is open along trend and at depth, contains both massive sulphide
mineralization at the Main Shaft prospect and disseminated, vein and lesser massive
sulphide mineralization at the Commonwealth South prospect. It extends from surface to an
average depth of 90 m, has a strike length of 400 m and is up to 25 m thick.
A separate Inferred Mineral Resource (included within the overall resource) has also been
calculated for the massive sulphide lens at Main Shaft to demonstrate the high grade nature
of such deposits that are the principal target for Impact’s exploration programme.
The Main Shaft Inferred Resource is:
145,000 tonnes at 4.3 g/t gold, 142 g/t silver, 4.8% zinc, 1.7% lead and 0.2% copper.
3. MULGA TANK NICKEL-COPPER-PGE PROJECT (IPT 100%)
Impact owns 100% of 13 exploration licences that cover 425 sq km of the highly prospective
Minigwal greenstone belt, 200 km east of Kalgoorlie in the emerging mineral province of the
south east Yilgarn Block, Western Australia (Figure 9).
An intensive and extensive three month exploration programme at Impact’s 100% owned
Mulga Tank Project 200 km east of Kalgoorlie in Western Australia was completed during the
Quarter.
Exploration for nickel and gold has been re-invigorated on the project with the completion of
three major surveys: an airborne magnetic and radiometric survey covering most of the
425 sq km project area; an innovative combined ground and airborne electrical survey and
the collection of 2,500 soil geochemistry samples.
The data generated from this work will be mostly used to help define drill targets identified
at the Mulga Tank Dunite and Panhandle Prospects in the western part of the project area.
Airborne Magnetic and Radiometric Survey
The airborne magnetic and radiometric survey was completed at a line spacing of 50 metres,
four times greater detail than previously available data (Figure 8).
Figure 8. Comparison of previous magnetic data (left) and new magnetic data (right) over the
Mulga Tank Dunite showing the increased resolution of units within it.
This new data has greatly improved the geological understanding of the entire project area
and in particular over the Mulga Tank Dunite which is highly prospective for large deposits of
nickel sulphide, where individual geological layers can now for the first time be mapped out
(Figure 8). This is important because the entire project lies under deep sand cover at least
50 metres thick in most places. A detailed interpretation of this data is in progress.
Ground and Airborne Electrical Survey
A innovative combined airborne and ground electrical survey was completed between and
including the Panhandle and Mulga Tank Dunite Prospects that covers about 15 km of strike
of nickel prospective rocks for a total area of about 70 square kilometres.
The survey was completed by GAP Geophysics and involved the HeliSAM ground-air system
in a variety of configurations.
The purpose of the survey was to help identify units of metasedimentary rocks under the
thick sand cover that contain massive iron sulphides (pyrite-pyrrhotite) that are generally
barren of nickel (or copper-zinc-lead) sulphide. These units generate a significant number
of false anomalies for nickel sulphides in conventional electromagnetic surveys.
Soil Geochemistry Survey
Approximately 1,000 soil samples were taken over the eastern half of the Mulga Tank Dunite
at a spacing of 200 m by 50 m and 1,500 samples have been taken over the Panhandle
Prospect at a spacing of 100 m by 50 metres.
Selected samples from areas of interest identified in the new geophysical data will be sent
for assay at an appropriate time.
About the Mulga Tank Project
Impact has discovered three styles of nickel sulphide mineralisation within the Mulga Tank
Dunite and surrounding rocks (see announcement dated 29th January 2014):
1. High tenor veins at the base of the Mulga Tank Dunite with drill results of:
0.25 m at 3.8% nickel, 0.7% copper and 0.7 g/t PGE and 0.3 m at 0.7% nickel.
2. High tenor nickel sulphide in multiple komatiites in a flow channel with drill results
of:
0.75 m at 0.85% nickel, 0.35% copper and 0.28 g/t PGE (Pt+Pd+Au); and
6.7 m at 0.5% nickel.
3. Extensive disseminated nickel in the Mulga Tank Dunite with drill results of:
2 m at 1.3% nickel including 1 m at 2% nickel and multiple zones of
0.5 m at 0.5% to 1.2% nickel within an intercept of 115 m at 0.3% nickel;
other thick intercepts of 21 m at 0.4% nickel and 59 m at 0.3% nickel.
The style of mineralisation and the nature of the ultramafic rocks are similar to those that
host the significant nickel deposits found at the Perseverance (45 Mt at 2% nickel), Rocky’s
Reward (9.6 Mt at 2.4% Ni) and Mt Keith >2 Mt of contained nickel) mines near Leinster in
Western Australia (Figure 9).
Impact’s results come from one 15 sq km area within a very large greenstone belt that
extends for 20 km along strike and which has not been explored for nickel. The area is also
highly prospective for gold deposits.
Figure 9. Location of the Mulga Tank Project and significant nickel sulphide mines
and prospects including Perseverance and Rocky’s Reward and with new nickelcopper-PGE discoveries in the emerging nickel-copper province to the east.
4. CORPORATE
Cash balance at the end of Quarter was $4.1 million.
Dr Michael G Jones
Managing Director
The review of exploration activities and results contained in this report is based on information compiled by Dr Mike Jones, a Member of
the Australian Institute of Geoscientists. He is a director of the company and works for Impact Minerals Limited. He has sufficient
experience which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is
undertaking to qualify as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration Results,
Mineral Resources and Ore Reserves (the JORC Code). Mike Jones has consented to the inclusion in the report of the matters based on
his information in the form and context in which it appears.
The information in this report which relates to Mineral Resources is based upon information compiled by Ian Glacken, who is a Fellow of
the Australasian Institute of Mining and Metallurgy. Ian Glacken is an employee of Optiro Pty Ltd and has sufficient experience which is
relevant to the style of mineralisation and type of deposit under consideration and to the activity which he is undertaking to qualify as a
Competent Person as defined in the 2012 edition of the Australasian Code for Reposting of Exploration Results, Mineral resources and Ore
Reserves. Ian Glacken consents to the the inclusion in the release of a summary based upon his information in the form and context in
which it appears.
Table 1. Significant Intercepts from Red Hill from Phase 2 Drilling
Hole ID
From
To
Interval
3PGE
g/t
Pt g/t
Pd g/t
Au g/t
Cu %
Ni %
Ag g/t
RHD007
364
369
5
0.63
0.02
0.02
0.59
0.09
0.14
0.80
RHD008
0
29
29
8.61
2.66
5.45
0.50
2.35
0.45
57.77
including
also
including
also
including
7
9
2
22.70
1.71
20.55
0.45
2.47
0.46
55.83
18.6
24
5.4
16.09
7.55
7.81
0.73
3.79
0.52
58.55
27.7
28.3
0.6
29.12
14.44
13.21
1.46
12.17
0.53
28.30
RHD009
91
173.5
82.5
NSA
NSA
NSA
NSA
0.01
NSA
1.55
0.33
0.15
0.05% Zn
including
100
104.9
4.9
NSA
NSA
NSA
0.01
0.09
NSA
6.34
0.60
0.15
0.5% Zn
including
also
including
also
including
also
including
also
including
104.2
104.9
0.7
NSA
NSA
NSA
0.03
0.34
NSA
19.64
1.69
0.37
1% Zn
132
132.8
0.8
NSA
NSA
NSA
0.01
0.03
NSA
18.60
4.22
4.57
1% Zn
141
143.9
2.9
NSA
NSA
NSA
0.01
0.02
NSA
3.69
2.83
0.36
1% Zn
156
158.1
2.1
NSA
NSA
NSA
NSA
NSA
NSA
2.83
1.21
0.34
1% Zn
166
173
7
NSA
NSA
NSA
0.02
NSA
1.47
0.45
0.05
RHD012
67.3
70.8
3.5
5.04
143.98
6.02
2.31
2.91
19.40
including
68.5
69.7
1.2
NSA
155.0
4
314.9
9
10.37
293.77
10.85
1.78
7.36
14.50
0.5% Zn
0.5 g/t
3PGE
10 g/t
3PGE
RHD015
58.1
62
3.9
8.26
4.25
3.76
0.25
1.44
0.28
13.44
including
61
61.5
0.5
20.61
14.20
6.16
0.24
5.16
0.66
49.80
1 g/t 3PGE
10 g/t
3PGE
RHD017
39
55
16
2.94
1.36
1.47
0.11
0.28
0.32
8.71
1 g/t 3PGE
including
41.9
43.6
1.7
7.77
3.61
3.93
0.23
0.62
0.37
19.89
5 g/t 3PGE
RHD018
20.7
21.7
1
NSA
NSA
NSA
1.38
NSA
NSA
3.40
0.04
NSA
1 g/t Au
27.9
28.9
1
NSA
NSA
NSA
1.46
0.03
NSA
0.80
0.01
0.02
1 g/t Au
113.65
113.8
0.15
NSA
NSA
NSA
0.05
1.55
NSA
22.80
1.33
0.01
1% Zn
Zn %
Pb
%
Cut-off
0.1 g/t Au
0.5 g/t
3PGE
10 g/t
3PGE
10 g/t
3PGE
10 g/t
3PGE
138.9
161.6
22.7
NSA
NSA
NSA
NSA
NSA
NSA
9.50
2.42
0.22
1% Zn
including
148.4
153.5
5.1
NSA
NSA
NSA
0.02
0.02
NSA
40.43
10.08
0.79
1% Zn
including
also
including
148.9
149.9
1
NSA
NSA
NSA
0.01
0.02
NSA
133
Share your feedback
Discover