High Grade Nickel Copper PGE at Plat Central
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 2 December 2020
Number: 724/02122020
HIGH GRADE NICKEL-COPPER-PGE AT PLAT CENTRAL
•
Assays confirm near surface high grade nickel-copper-PGE mineralisation in the recently
discovered basal channel at Plat Central.
•
PSIPT030 returns 1 metre at 22.7 g/t 7PGE, 3.3 % nickel, 1% copper, 23 g/t silver and 755 g/t cobalt
o The 7PGE grade comprises: 10.9 g/t palladium, 7.3 g/t platinum, 0.9 g/t rhodium, 1.3 g/t osmium,
1.4 g/t iridium and 0.6 g/t ruthenium and 0.1 g/t gold.
PSIPT031 returns 7 metres at 3.8 g/t 7PGE, 0.6% copper, 0.5% nickel, 9.4 g/t silver and 167 g/t
cobalt down hole including 1 metre at 6.3g/t 7PGE, 1.2% copper, 0.8% nickel, 19 g/t silver and
229 g/t cobalt.
o The 7PGE grade for the 1 metre intercept comprises: 3.6 g/t palladium, 1.8 g/t platinum, 0.1 g/t
rhodium, 0.2 g/t iridium, 0.2 g/t osmium and 0.1 g/t ruthenium and 0.3 g/t gold.
PSIPT021 returned 3 metres at 3.3 g/t 3PGE, 0.6% copper and 0.4% nickel.
•
•
•
•
•
•
The nickel-copper-PGE mineralisation shows strong lateral zonation across the width of the
channel which is likely the product of sulphide fractionation, a process well known in nickelcopper-PGE deposits globally.
The sulphide fractionation model explains many of the features of the mineralisation along
the Moorkai Trend and is a powerful tool to guide further exploration.
The model, in conjunction with Impact’s proprietary ratio that is a predictor of PGE grade,
are being used to guide further drilling which is still in progress.
The channel has been tracked 25 metres up dip to the south with drilling to track the
channel down dip to the north to commence imminently.
Drill chips up to 2 cm in dimension with disseminated pentlandite and chalcopyrite containing 3% nickel,
1% copper and 22.7 g/t 7PGE from ultramafic rocks at Plat Central (PSIPT030 from 62-63m).
26 Richardson Street West Perth Western Australia 6005
Tel +61 (8) 6454 6666 Facsimile +61 (8) 6454 6667
Email info@impactminerals.com.au www.impactminerals.com.au
Very high grade assays for platinum group elements (PGE) with associated high grades of nickel and
copper have been confirmed at Impact Minerals Limited’s (ASX:IPT) Plat Central prospect within the
Broken Hill project in New South Wales (Figure 1).
The assays confirm and are in line with expectations from measurements made with a hand-held XRF
instrument of nickel, copper and Impact’s proprietary geochemical ratio which has been shown to have an
exceptional positive correlation with PGE grades (ASX Release 6th October 2020).
The high grade mineralisation is associated with disseminated to blebby sulphide mineralisation within a
Kambalda-style channel at the base of the host ultramafic unit and which was discovered by drilling
guided exclusively by the ratio. The mineralised part of the channel is about 25 to 30 metres wide and
between 1 and 7 metres thick (Figure 1 and ASX Release 21st October 2020).
Figure 1. Cross section at Plat Central highlighting high grade mineralisation within a channel in the host
ultramafic unit. Note the strong lateral zonation of mineralisation in the channel away from the “pinchout” in Hole 030 and the PGE depletion in the parent ultramafic unit immediately above the channel.
2
The mineralisation shows strong lateral zonation across the channel as evidenced from assays from four
key drill holes. It varies from very high grade PGE-nickel-copper within a structural “pinch-out” to the
east, to good grades of PGE and copper in the centre of the channel, out to modest PGE-dominant
mineralisation at the edge of the channel to the west (Figure 1).
In the “pinch-out”, hole PSIPT030 returned:
1 metre at 22.7 g/t 7PGE, 3.3 % nickel, 1% copper and 23 g/t silver from 62 m down hole.
The 7PGE grade comprises: 10.9 g/t palladium, 7.3 g/t platinum, 0.9 g/t rhodium, 1.3 g/t
osmium, 1.4 g/t iridium and 0.6 g/t ruthenium and 0.1 g/t gold.
In the central eastern part of the channel PSIPT031 returned:
7 metres at 3.8 g/t 7PGE, 0.6% copper, 0.5% nickel and 9.4 g/t silver from 53 metres down
hole including
1 metre at 6.3g/t 7PGE, 1.2% copper, 0.8% nickel and 19 g/t silver from 58 metres.
The 7PGE grade for the 1 metre intercept comprises: 3.6 g/t palladium, 1.8 g/t platinum,
0.1 g/t rhodium, 0.2 g/t iridium, 0.2 g/t osmium and 0.1 g/t ruthenium and 0.3 g/t gold.
In the central western part of the channel PSIPT021 returned:
3 metres at 3.3 g/t 3PGE, 0.6% copper and 0.4% nickel from 52 metres down hole including
1 metre at 4.7 g/t 3PGE, 0.9% copper, 0.4% nickel from 52 metres.
The 3PGE grade for the 1 metre intercept comprises: 3.0 g/t palladium, 1.4 g/t platinum
and 0.3 g/t gold.
At the western edge of the channel PSIPT029 returned:
2 metres at 1.4 g/t 3PGE and 0.3% copper from 35 metres down hole and also
1 metre at 1.9 g/t 3PGE and 0.3% Cu from 43 metres in the footwall sedimentary rocks.
The 3PGE grade for the 2 metre intercept is 0.8 g/t palladium, 0.5 g/t platinum and
0.1 g/t gold.
In addition new assays from Hole PSIPT022 and PSIPT033 combined with previously reported assays
from PSIPT016 and 017 indicate a larger scale lateral zonation characterised by elevated PGE’s within the
parent ultramafic outside the channel, and lesser PGE’s in the parent ultramafic overlying the high grade
channel (Figure 1 and ASX Release 21st October 2020).
Furthermore, assays from early drill holes that required re-sampling after the loss of a batch of samples
have returned low grade results as anticipated from Impact’s ratio. Early drill holes at Platinum Springs
were drilled away from the prospective channels which were only discovered well into the programme.
Highlights include:
1 metre at 1.1 g/t 3PGE and 0.3% copper from 49 metres in PSIPT005 and 1 metre at 0.6 g/t 3PGE
from 40 metres in PSIPT003.
Further details on the drill holes and significant intercepts are in the tables at the end of the report.
3
DISCUSSION
The strong lateral zonation evident in the mineralisation at Plat Central is characteristic of a process called
“sulphide fractionation” which is well understood in magmatic nickel-copper-PGE systems. The process
results in a distribution of metals that is reasonably predictable: proximal nickel-dominant mineralisation
passes into copper-dominant mineralisation and then more distal PGM-dominant mineralisation (see text
box for further explanation). This may occur over many scales varying from metres to kilometres.
A model of sulphide fractionation can explain the cause of the significant variation in metal content,
nickel and copper in particular, seen at Plat Central, the broader Platinum Springs area and the entire
Moorkai Trend, a major nine kilometre long dyke and chonolith complex with extensive PGE-nickelcopper mineralisation along its entire length (Figure 2).
Figure 2. Rock chip sample and key drill results from along the Moorkai Trend.
4
Exploration along the Moorkai Trend has been very haphazard because the mineralisation appeared to be
discontinuous and erratic and was not well understood. Sulphide fractionation occurring at a variety of
scales can explain many of these features and the model can now act as a potentially powerful guide to
high grade ore.
The zonation in the basal channel Plat Central occurs at a scale of 10’s of metres with the highest grade
mineralisation occurring in the “pinch-out”, which is a structural “trap”. It is possible that as the channel
is tracked along trend it may open out into a larger trap site in places and lead to the formation of a much
larger body of massive high grade nickel-copper sulphide.
Such sulphide-rich bodies are worthy exploration targets as they demonstrably have exceptional PGE
grades in the area such as found in PSIPT030 reported here and also Impact’s drill hole PSD02 which
returned 0.6 metres at 11.5 g/t platinum, 25.6 g/t palladium, 1.4 g/t gold, 7.6% copper, 7.4% nickel
and 44.3 g/t silver from in what is likely to be another pinch-out structure (ASX Release 3rd February
2016)
The basal channel at Plat Central has a geometry similar to many nickel-copper-PGE sulphide deposits
formed at the base of mafic to ultramafic intrusive and extrusive rocks globally (ASX Release 21st
October 2020).
The type-example of such channels are those at the world class Kambalda nickel mining district of
Western Australia. Here, the channels are ribbon-like and are mostly less than 5-7 metres thick, no more
than 50-100 metres wide but usually extend for many hundreds of metres to kilometres along the trend of
the channel. Figure 3 shows a cross section through the Kambalda Dome with numerous channels
highlighted for comparison.
Figure 3. Cross section through the Kambalda Dome showing scale and size of numerous channel
structures containing the nickel ore shoots.
5
Sulphide Fractionation
At a certain point in the evolution of an ultramafic (or mafic) magma that is carrying sulphur, nickel,
copper and PGE’s in solution, if the chemical and physical conditions are correct then an immiscible
sulphide liquid containing the nickel-copper-PGE will separate out from the magma. That sulphide liquid
is usually denser than the magma and so will move differently to it, commonly sinking towards the base
of the host unit or being spread out along magma channels.
During this movement, and depending on the composition of the sulphide liquid and pressure and
temperature conditions, the liquid may fractionate and precipitate different sulphide minerals over time.
This precipitation occurs in a distinct order of nickel first, then copper and finally PGE’s, a zonation
pattern that is well documented in deposits globally and is eminently present at Plat Central (Figure 1).
Kambalda-style channels are also commonly structurally complex with the potential to form numerous
traps along the trend of the channel.
It is likely that there are many channels similar to that at Plat Central along the Moorkai Trend and indeed
a second channel is emerging at the Plat East prospect (Figure 4 and ASX Release 21st October 2020).
The geometry of the channels is likely to be as variable as those at Kambalda and the potential exists to
find a significant body of high grade mineralisation with further drilling along trend.
NEXT STEPS
The sulphide fractionation model and Impact’s proprietary ratio are now being used to track the basal
channel at Plat Central where drilling is still in progress.
A further line of drill holes has now been completed 25 metres to the south of, and up dip from, the initial
line at Plat Central. The ratio indicates that PGE mineralisation is likely to be present over some distance
on this line as well (Figure 4). A detailed interpretation of the data is in progress and drilling to the north
down dip will commence shortly.
A drill spacing of about 25 to 30 metres is optimal in the first instance for the step out drilling required to
track the channel, with infill drilling as required. Such drill spacings are also similar to those used in
exploration for nickel sulphide channels in the Kambalda region.
Samples from the new drill traverse have been submitted for assay with results due in early January.
Drilling is also on -going at Little Broken Hill Gabbro and assays are due shortly for the first drill holes
completed there as well as for Red Hill and Dora East.
6
Plat Central
Channel
Platinum Springs East
Central
Drilling in progress
Figure 4. Plan view of recent drilling at Platinum Springs showing ratio values as calculated from handheld XRF data. Note two areas of more coherent elevation of the ratio at Plat Central and Platinum
Springs East and the extent of the white dots (highest ratios) over 80 to 100 metres within the corridors.
The channel at Plat Central clearly extends to the south up dip. Further drilling will track the channel
down dip to the north.
ABOUT IMPACT’s RATIO: A VECTOR TO HIGH GRADE PGE AT PLATINUM SPRINGS
Impact has undertaken a considerable amount of in-house research on the nature and origin of the unusual
ultramafic and mafic rocks that host the exceptional grades of nickel-copper-PGE mineralisation at
Broken Hill (ASX Release 6th March 2019).
As part of that research Impact has very recently identified a specific multi-metal ratio (that is proprietary
to Impact) that shows an exceptional positive correlation with PGE grades and offers a possible vector
towards higher grade zones (6th October 2020).
Figure 5 shows an updated graph of the relationship between the geochemical ratio and grades of
platinum+palladium+gold (3PGE) as determined by laboratory assay for all available data at Platinum
Springs. It includes the ratios from the high grade intercepts in Hole PSIPT030 and PSD02 as well as a
large number of non-material assays of lower grade PGM’s (ASX Release 6th October 2020).
7
Figure 5. Graph of platinum+palladium+gold (3PGE) in parts per billion (1,000 ppb = 1 g/t: y axis)
against Impact’s proprietary ratio (x axis). Note key thresholds at a ratio of between 2 to 5 and also in
particular of more than 20 that mark increases in grade of the 3PGE. Note also that there are some
exceptions to the rules.
The positive relationship between the ratio and 3PGE grade is self-evident in the figure. It suggests that
anomalous grades of more than 100 ppb 3PGE are generally associated with ratios greater than 2 to about
5 and that ratios greater than 20 are likely to have 3PGE grades greater than about 1.0 g/t.
The ratios for Hole PSIPT030 and PSD02 are visible in the top left hand corner and it is apparent that the
ratio is working over several orders of magnitude.
Impact interprets the changes in ratio to reflect changes in specific physico-chemical conditions in the
parent ultramafic magma at the time of mineralisation.
Impact has also demonstrated to its satisfaction that hand-held XRF data is of sufficient accuracy and
precision compared to the laboratory assay data to be used to calculate the ratio in the field to guide
drilling as programs progress.
The vector may offer a method to help overcome one of the main exploration challenges that Impact and
all previous explorers have faced at Platinum Springs which is to discriminate and rank the numerous high
grade drill intercepts spread over many hundreds of metres that have proved difficult to track with the drill
rig.
8
This exploration challenge has also discouraged extensive exploration of the entire Moorkai Trend that
has very high grade nickel-copper-PGM’s in rock chip samples along its entire length (ASX Release 3rd
February 2016). Impact’s ratio may open up the entire Trend to further systematic exploration for the first
time.
A similar challenge also occurs in many other chonolith-feeder zone systems around the world where
despite commonly complex geometry, significant high grade mineralisation may persist for long distances
down plunge. This is being currently demonstrated for example at the Julimar intrusion in Western
Australia (Chalice Gold NL).
COMPLIANCE STATEMENT
This report contains collar locations and assay data for 8 new drill holes drilled by Impact.
Dr Mike Jones
Managing Director
The review of exploration activities and results contained in this report is based on information compiled by Dr Mike Jones, a Member of the
Australian Institute of Geoscientists. He is a director of the company and works for Impact Minerals Limited. He has sufficient experience
which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is undertaking to qualify
as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and
Ore Reserves (the JORC Code). Mike Jones has consented to the inclusion in the report of the matters based on his information in the form
and context in which it appears.
ABOUT THE BROKEN HILL PROJECT
Platinum Springs lies at the northern end of a 40 km belt of ultramafic to mafic rocks prospective for
nickel-copper-PGE mineralisation located about 15 km east and south of Broken Hill in New South Wales
(Figure 6).
Impact is one of the largest ground holders in the region which is famous for the world class Broken Hill
silver-lead-zinc mine with over 300 million tonnes of sulphide ore, either mined or in resources.
9
Figure 6. Location of Impact’s tenements in the Broken Hill area and key prospects for nickel-copperPGM mineralisation. Platinum Springs, Red Hill and Little Broken Hill Gabbro are in the NE of the map.
10
TABLE 1. DRILL HOLE DETAILS
Hole ID
PSIPT003
PSIPT005
PSIPT021
PSIPT022
PSIPT029
PSIPT030
PSIPT031
PSIPT033
MGA_E
MGA_N
6472104
562961
6472104
562980
562570
562610
562550
562590
562581
562530
6472110
6472110
6472110
6472110
6472102
6472110
RL Depth
235
52
235
67
223
73
225
74
223
58
224 100
224 100
223
52
Dip
-90
-90
-90
-90
-90
-90
-90
-90
TABLE 2. SIGNIFICANT INTERCEPTS
11
APPENDIX 1 - SECTION 1 SAMPLING TECHNIQUES AND DATA FOR THE BROKEN HILL PROJECT
Criteria
JORC Code explanation
Sampling techniques
Nature and quality of sampling (e.g. cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the
minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used
Aspects of the determination of mineralisation that are Material to the
Public Report. In cases where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine nodules)
may warrant disclosure of detailed information
Drilling techniques
Drill sample recovery
Commentary
Reverse Circulation (RC) percussion drilling was used to produce a 1m bulk sample (~25kg) which was
collected in plastic bags. 1m split samples (nominally 3kg) were collected using a riffle splitter and
placed in a calico bag. The cyclone was cleaned out with compressed air at the end of each hole and
periodically during the drilling. Holes were drilled to optimally intercept interpreted mineralised zones.
For samples within the target ultramafic unit, the 1m sample in the calico bag was sent for assay.
Outside the ultramafic unit the bulk sample was speared using standard techniques to produce either a
2 metre or 4 metre composite for assay.
Sample representivity was ensured by a combination of Company Procedures regarding quality control
(QC) and quality assurance / testing (QA).
Examples of QC include (but are not limited to), daily workplace and equipment inspections, as well as
drilling and sampling procedures. Examples of QA include (but are not limited to) collection of “field
duplicates”, the use of certified standards and blank samples approximately every 50 samples.
RC samples were submitted to Intertek Laboratories in Perth for assay by 4 acid digest with ICP-MS
finish and Fire Assay technique FA/50 MS (lead collection) for gold, platinum and palladium and fire
assay technique NS/25/MS (nickel sulphide collection) for gold platinum, osmium, iridium, palladium,
rhodium and ruthenium. Sample preparation involved: sample crushed to 70% less than 2mm, riffle split
off 1 kg, pulverise split to >85% passing 75 microns.
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (e.g. core diameter, triple or
standard tube, depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
RC drilling comprises 4-inch hammer.
Method of recording and assessing core and chip sample recoveries and
results assessed
RC samples were visually checked for recovery, moisture and contamination as determined from
previous drill logs.
Measures taken to maximise sample recovery and ensure representative
nature of the samples
The RC samples were collected by plastic bag directly from the rig-mounted cyclone and laid directly on
the ground in rows of 10. The drill cyclone and sample buckets are cleaned between rod-changes and
after each hole to minimise down-hole and/or cross contamination.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
No relationship has been established and it is considered unlikely to be a material issue.
Criteria
Logging
Sub-sampling techniques and
sample preparation
Quality of assay data and
laboratory tests
Verification of sampling and
assaying
JORC Code explanation
Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
Commentary
Geological logging of samples followed company and industry common practice. Qualitative logging of
samples included (but not limited to); lithology, mineralogy, alteration, veining and weathering.
Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
All logging is quantitative, based on visual field estimates. Systematic photography of the RC chip trays
was completed.
The total length and percentage of the relevant intersections logged
All RC chips samples were geologically logged by on-site geologists.
If core, whether cut or sawn and whether quarter, half or all core taken.
Not applicable.
If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
All RC samples collected in calico bags were split using a riffle splitter. Samples were dry when sampled.
Composite samples were collected from the bulk sample bags using a poly pipe spear.
For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
Company procedures were followed to ensure sub-sampling adequacy and consistency. These included
(but were not limited to), daily workplace inspections of sampling equipment and practices, as well as
sub-sample duplicates (“field duplicates”).
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Laboratory QC procedures for rock sample assays involve the use of internal certified reference material
as assay standards, along with blanks, duplicates and replicates. Impact uses field duplicates and
standards for every 1 in 50 samples and blanks every 1 in 100 samples.
Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/secondhalf sampling.
All QA/QC results were within acceptable levels of +/- 15-20%
Whether sample sizes are appropriate to the grain size of the material
being sampled.
Sample sizes are considered appropriate for the mineralisation style.
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
Industry standard fire assay and 4 acid digest analytical techniques were used. Both techniques are
considered to be almost a total digest apart from certain refractory minerals not relevant to exploration
at Platinum Springs.
For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make
and model, reading times, calibrations factors applied and their derivation,
etc.
N/A
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels of
accuracy (i.e. lack of bias) and precision have been established.
Field duplicates: 1 in every 50 samples. Standards 1 in 50 samples. Blanks 1 in 100 samples. In addition,
standards, duplicates and blanks were inserted by the analytical laboratory at industry standard
intervals.
The verification of significant intersections by either independent or
alternative company personnel.
The results have not been verified by independent or alternative companies. This is not required at this
stage of exploration.
Criteria
Location of data points
JORC Code explanation
The use of twinned holes.
N/A
Documentation of primary data, data entry procedures, data verification,
data storage (physical and electronic) protocols.
Primary assay data for drill assays has been received digitally from the laboratory and imported into
Datashed to be combined with hole numbers and depths by Impact. Exports of data are used for pltting
results in Mapinfo, Geosoft Target and Leapfrog. Original pdf laboratory assay certificates are saved for
verification when required.
Discuss any adjustment to assay data.
There are no adjustments to the assay data.
Accuracy and quality of surveys used to locate drillholes (collar and downhole surveys), trenches, mine workings and other locations used in Mineral
Resource estimation.
Specification of the grid system used.
Quality and adequacy of topographic control.
Data spacing and distribution
Commentary
Drill holes were located by hand held GPS.
The grid system for Broken Hill is MGA_GDA94, Zone 54.
Standard government topographic maps have been used for topographic validation.
Data spacing for reporting of Exploration Results.
RC drill holes are drilled at varying spacings, orientations and depths deemed appropriate for early stage
exploration
Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
Estimations of grade and tonnes have not yet been made.
Whether sample compositing has been applied.
Sample compositing was done for samples outside the target ultramafic unit. This was done to provide
geochemical data that may help vector towards ore.
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering the
deposit type.
The orientation of mineralisation is yet to be determined. A 3D review of the mineralisation is currently
underway to better interpret the orientation of mineralisation and assist follow-up drilling.
If the relationship between the drilling orientation and the orientation of
key mineralised structures is considered to have introduced a sampling
bias, this should be assessed and reported if material.
Not relevant to early stage exploration drill results. No sampling bias has been detected.
Sample security
The measures taken to ensure sample security.
Chain of custody is managed by Impact Minerals Ltd. A courier is contracted by Impact Minerals to
transport the samples from Broken Hill to the Intertek laboratory in Alice Springs for preparation and
then sent to Intertek in Perth for assay. Whilst in storage, they are kept in a locked yard. Tracking sheets
have been set up to track the progress of batches of samples.
Audits or reviews
The results of any audits or reviews of sampling techniques and data.
At this stage of exploration, a review of the sampling techniques and data by an external party is not
warranted.
Orientation of data in relation
to geological structure
SECTION 2 REPORTING OF EXPLORATION RESULTS
Criteria
Mineral tenement and land
tenure status
JORC Code explanation
Commentary
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The Broken Hill Project currently comprises 8 exploration licences covering 825 km2. The tenements are
held 100% by Impact Minerals Limited. No aboriginal sites or places have been declared or recorded
over the licence area. There are no national parks over the licence area.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
The tenements are in good standing with no known impediments.
Exploration done by other
parties
Acknowledgment and appraisal of exploration by other parties.
Previous work has been reported where required in accordance with the JORC Code in reports referred
to in the text.
Geology
Deposit type, geological setting and style of mineralisation.
Nickel-copper-PGE sulphide mineralisation associated with an ultramafic intrusion.
Drill hole Information
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for
all Material drill holes:
•
easting and northing of the drill hole collar
•
elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
•
dip and azimuth of the hole
•
down hole length and interception depth
•
hole length.
See Table details within the main body of this ASX Release.
In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (e.g. cutting of high grades)
and cut-off grades are usually Material and should be stated.
All reported assays have been length weighted. No top cuts have been applied. A minimum grade of
100 ppb 3PGE has been used.
Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used for
such aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
High grade semi-massive and vein-style sulphide intervals internal to broader zones of disseminated
sul
Share your feedback
Discover