March 2017 Quarterly Report
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 28 April 2017
No. 507/280417
Market Cap
MARCH 2017 QUARTERLY REPORT
SUMMARY
A$16.5m (0.021 p/s)
1. COMMONWEALTH GOLD-SILVER-BASE METAL
PROJECT, N.S.W. (IPT 100%)
Issued Capital
788,771,085
Impact selected as one of three finalists for NSW Explorer of the
Year for the Silica Hill discovery. The winner will be announced
in early May.
New drill assay, Induced Polarisation and soil geochemistry data
confirm significant exploration potential at Commonwealth-Silica
Hill.
Drill assays from CMIPT048 return:
Directors
126 metres at 0.6 g/t gold and 25 g/t silver from 33 metres
(1.0 g/t gold equivalent)
including 3 metres at 4 g/t gold and 377 g/t silver (9.6 g/t gold
equivalent); and
8 metres at 1.9 g/t gold and 35 g/t silver (2.4 g/t gold equivalent)
Peter Unsworth
Hole CMIPT049 returns a 70 metre thick zone of modest silver
mineralisation interpreted to be at the top of the mineralised
system. Lower gold-rich part interpreted to be fault offset to the
west.
Mineralisation still open in all directions.
IP Data identifes new chargeability anomalies extending for at
least 500 metres north of area drilled at Silica Hill and new
conductivity anomaly below Main Shaft
Chargeability anomalies coincident with significant untested gold
and silver-in-soil anomaly also covering an area of 1,000 metres by
1,000 metres
Numerous new targets identified and a much larger follow up drill
programme than anticipated is being planned with the aim of
commencing as soon as practicable.
Paul Ingram
Chairman
Dr Michael Jones
Managing Director
Non-Executive Director
Markus Elsasser
Non-Executive Director
Felicity Gooding
Non-Executive Director
Bernard Crawford
Company Secretary
www.impactminerals.com.au
2. BROKEN HILL PGM-NI-CU PROJECT, N.S.W. (IPT 100%)
Significant potential for cobalt mineralisation identified.
VTEM survey completed over two key areas.
3. MULGA TANK NI-CU-PGE PROJECT, W.A. (IPT 100%)
Interpretation of soil geochemistry results completed..
a 26 Richardson Street
West Perth
Western Australia 6005
t +61 (8) 6454 6666
f +61 (8) 6454 6667
e info@impactminerals.com.au
1. COMMONWEALTH GOLD-SILVER-BASE METAL PROJECT (IPT 100%)
The Commonwealth Project comprises five 100% owned exploration licences that cover about
1,000 sq km of the highly prospective Lachlan Fold Belt about 100 km north of Orange in NSW. The
belt is host to many major gold-silver-copper mines including the Cadia-Ridgeway deposits that
contain at least 25 million ounces of gold and 10 million tonnes of copper (Figure 1).
Figure 1. Location of the Commonwealth Project within the Lachlan Fold Belt of NSW, home to
many significant gold and copper mines.
New drill assay, Induced Polarisation (IP) and soil geochemistry data from the Commonwealth-Silica
Hill area continue to demonstrate the significant exploration potential of these two key prospects
(Figure 2).
Assay data from two drill holes at Silica Hill completed in December 2016 returned thick widths of up
to 126 metres of modest gold and silver mineralisation and confirm the continuity of the mineralised
system for a further 50 metres down dip (Figures 3 and 4).
Significant mineralisation has now been intersected in six drill holes so far at Silica Hill, over an area
of 200 metres by 100 metres down to a depth of 120 metres below surface and with an average true
thickness of at least between 50 metres and 70 metres. The mineralisation is open in all directions
including up dip (Figures 3 and 4 and see also announcement dated 5th December 2016).
The Silica Hill discovery has lead to Impact being selected for the second year in a row for the New
South Wales Explorer of the Year Award for outstanding performance of an exploration company,
business unit or project in exploration in NSW over the past 12 to 18 months. The winner of the
award will be announced on Monday 8th May 2017.
The new IP and soil geochemistry data show that the area partly drilled by Impact covers only the
southern quarter of a much larger target area of up to one square kilometre containing numerous
undrilled IP and gold- and silver-in soil anomalies. In addition a conductor that may represent massive
sulphides has been identified at depth below the Commonwealth resource at Main Shaft.
Figure 2. Silica Hill-Commonwealth area: Geology and exploration results. Drill traces shown for Silica
Hill only to demonstrate the small area only partly tested to date. Note the area of greater than 100
gram.metre intercepts and the large untested coincident gold- and silver-in soil and interpreted IP
chargeability anomaly trends. Note also the significant IP anomaly to the north east along the extension of
the Welcome Jack Trend.
This new data, together with previous targets identified over the past 12 months of intensive work by
Impact, have resulted in the identification of a significant number of follow up drill targets at
Commonwealth. This includes targets at depth and along strike from the Commonwealth deposit (Main
Shaft and Commonwealth South); the area covering nearly one square kilometre north of the drilling at
Silica Hill; and follow up work at the Welcome Jack and Walls Prospects 1,500 metres east of Silica Hill.
Accordingly a much larger drill programme will be required to properly test the targets than previously
anticipated and this has been designed with the aim of commencing when final statutory approvals have
been received.
1.1 Drill Assay Results from Silica Hill
Two diamond drill holes were completed in December 2016 and returned the following assay results
this Quarter:
Hole CMIPT048 returned:
126 metres at 0.6 g/t gold and 25 g/t silver (1.0 g/t gold equivalent) from 33 metres
including: 6 metres at 1 g/t gold and 26 g/t silver (1.4 g/t gold equivalent) from 58 metres; and
11 metres at 1.9 g/t gold and 132 g/t silver (3.9 g/t gold eq) from 79 metres
which includes 3 metres at 4 g/t gold and 377 g/t silver (9.6 g/t gold eq) from 84 metres;
and
8 metres at 1.9 g/t gold and 35 g/t silver (2.4 g/t gold eq) from 132 metres
which includes 2 metres at 3.9 g/t gold and 56 g/t silver (4.7 g/t gold eq) from 137 metres.
Detailed studies on the diamond drill core show that this drill hole may not be optimally oriented to
intersect the very high grade silver and high grade gold veins intersected in Hole CMIPT43 which is
between 20 metres and 50 metres away (Figures 3 and 4).
Figure 3. Silica Hill: Significant drill results showing new results from CMIPT048 and 049. The
mineralisation is open in all directions.
Four drill holes out of the six drilled at Silica Hill have returned “gram times metre” intercepts of more
than 100 gram.metres (Figure 2). These are robust and significant results for possible bulk mining and
indicate the potential to significantly increase the resources at the Commonwealth Project, which
currently stand at 720,000 tonnes at 2.8 g/t gold, 48 g/t silver, 1.5% zinc and 0.6% lead (see
announcement 19 February 2015).
Figure 4. Cross section through Silica Hill showing new results from CMIPT048. High grade veins
and shoots in CMIPT046 may plunge off section to the south.
Hole CMIPT049 returned numerous zones of between 5 g/t and 50 g/t silver in a 70 metre thick zone
of mineralisation with best assays of:
13 metres at 0.1 g/t gold and 49 g/t silver (0.8 g/t gold eq) from 174 metres which includes
2 metres at 115 g/t silver from 178 metres and
1 metre at 0.5 g/t gold and 144 g/t silver (2.6 g/t gold eq) from 184 metres.
The mineralisation in this drill hole is terminated by a fault at 189 metres down hole and detailed
studies suggest that only the upper silver rich part of the mineralised zone has been intersected (see
announcement dated 5th December 2016). It is interpreted that the mineralisation has been offset
along the fault to the west, close to Main Shaft and further drilling is required in this area.
The mineralisation at Silica Hill is still open in all directions and further infill and extensional drilling
is required, in particular down dip and also to the north where new IP anomalies have been identified
(Figures 4 and 5).
1.2 IP-Resistivity-Conductivity Survey
New Induced Polarisation geophysical data has identified three significant target areas that have not
been drilled:
1. numerous chargeability anomalies covering an area of at least 500 metres by 500 metres to the
immediate north of the area drilled at Silica Hill (Figures 2 and 5). Previous work by Impact
has shown a strong correlation between IP chargeability anomalies and sulphide
mineralisation. The size and strength of the new anomalies and their coincidence with strong
gold- and silver-in soil anomalies is very encouraging (Figure 2 and 5); and
2. a conductivity anomaly centred at about 100 metres below the deepest drill hole at the northern
part of the Commonwealth deposit at Main Shaft (Figure 6). This drill hole returned 31 metres
at 0.13% copper and 5 g/t silver from 209 metres down hole including 1 metre at 0.7% copper,
1.1% zinc, 0.4% lead, 31 g/t silver and 0.4 g/t gold from 218 metres.
In support of this anomaly, a down hole electromagnetic survey of this same drill hole has also
identified a moderate conductor in a similar position. This is a priority drill target for a down
dip extension of the Commonwealth resource; and
3. a strong chargeability anomaly east of Silica Hill along the northern extension of the Welcome
Jack Trend (Figure 6). No work had previously been done in this area. During the Quarter,
field checking and a soil geochemistry survey were completed over the area with results
expected in May.
All of these areas require follow up work including drilling.
Figure 5. Three dimensional view from the south of the new IP data showing the extent of the
chargeability anomalies (red areas win dashed oval) north of Silica Hill (drill traces shown in black)
and also the location of the Commonwealth resource. The survey lines are 100 metres apart.
Figure 6. Three dimensional view looking north showing an image of the IP resistivity data with
conductive zones shown in red and also showing the outline of the Commonwealth resource. Note the
conductor at depth below the resource that is undrilled.
New Anomalies
Figure 7. View of the new IP data from the south west showing the strong chargeability anomalies to
the east of Silica Hill and to the north of Welcome Jack. No work has been done here.
The IP method is an electrical geophysical survey technique that can identify disseminated sulphides
which manifest themselves as so called chargeability anomalies. In addition the IP method can also
measure how resistive the sub-surface is. For example, large bodies of silica are generally poor
conductors of electricity and so are said to be resistive. Resistivity and conductivity are related by a
simple mathematical equation and therefore conductivity can also be calculated. Massive sulphide
bodies are commonly, but not always, conductive.
1.3 Soil Geochemistry Survey
A strong gold- and silver-in-soil anomaly that is up to 1,000 metres by 1,000 metres in dimension has
now been defined north of the area drilled at Main Shaft and Silica Hill (Figure 2).
Only about 10% of this area has been drill tested and the strongest and largest part of the anomaly lies
to the north and north east of the area drilled. This is also coincident with the strongest and largest IP
chargeability anomalies (Figures 2, 5 and 8). These are priority areas for drilling.
New environmental approvals to drill in this area have been applied for.
Figure 8. Three dimensional view from the south of the southern most IP line and showing the
Commonwealth resource and the drill traces at Silica Hill with an image of silver-in-soil (red areas
greater than 1 g/t silver) to the north of the IP line. There is an extensive undrilled silver-in-soil
anomaly covering many hundreds of square metres.
About the Gold-Silver Mineralisation at Silica Hill
The mineralisation discovered by Impact at Silica Hill comprises disseminated sulphide, veins and semimassive sulphide veins within the Silica Hill rhyolite. The veins commonly contain high to very high
grades of gold and in particular silver. For example, Hole CMIPT046 returned 30 individual assays of
varying widths of between 2 g/t and 24 g/t gold and 12 individual assays with more than 500 g/t silver
(Figure 4) and Hole CMIPT011 returned two veins with 3,146 g/t silver (0.9 metres thick) and 3,600 g/t
silver (0.15 m thick).
Four previous drill holes have returned significant intercepts at Silica Hill.
Drill hole CMIPT046 returned high grade gold and very high grade silver over a 41 metre thick intercept
within a 74 metre thick zone of gold-silver mineralisation (Figures 3 and 4).
Key intercepts include:
74.5 metres at 1.2 g/t gold and 106 g/t silver (2.9 g/t gold equivalent) from 61 metres
including 41.3 metres at 2.0 g/t gold and 176 g/t silver (4.7 g/t gold equivalent) from 61 metres;
which includes 16.3 metres at 3.7 g/t gold and 246 g/t silver (7.6 g/t gold equivalent) from 86 metres.
Gold equivalency calculations are based on the following US dollar prices: Gold $1326/oz; silver and $18.82/oz.
The intercept in CMIPT046 includes numerous high grade gold and silver intercepts from individual veins
and groups of veins (which have been sampled in detail) including:
1 metre at 12.2 g/t gold and 680 g/t silver
including 0.3 metres at 23 g/t gold and 1,110 g/t silver;
1 metre at 5.3 g/t gold and 924 g/t silver;
1.7 metres at 3.8 g/t gold and 1,176 g/t silver; and
0.7 metres at 1.5 g/t gold and 855 g/t silver.
Hole CMIPT011 (Figure 9):
48.6 metres at 0.5 g/t gold and 137 g/t silver (2.5 g/t gold equivalent) from 122 metres.
Including
which includes:
and:
which includes
23 metres at 224 g/t silver (3.6 ounces) and 1.0 g/t gold from 147.7 metres
0.9 metres at 3,146 g/t silver (101 ounces) and 2.4 g/t gold from 148.1 metres;
2.9 metres at 406 g/t silver (13 ounces) and 0.6 g/t gold from 157.6 metres
a 15 cm vein that returned 3,600 g (116 ounces) of silver and 0.4 g/t gold;
and also including: 4 metres at 104 g/t (3.4 ounces) silver and 1.5 g/t gold from 160 metres;
and:
1 metre at 4.7 g/t gold and 23 g/t silver from 169.5 metres.
Figure 9. East-West cross section showing results for Holes CMIPT043 and 011.
Hole CMIPT043, drilled above Hole CMIPT011, (Figures 3 and 9) returned:
68 metres at 0.5 g/t gold and 43 g/t silver (1.3 g/t gold equivalent) from 99 metres;
including the upper silver-rich zone of 37 metres at 0.1 g/t gold and 71 g/t silver (2.3 ounces) and the
lower gold-rich zone of 18 m at 1.7 g/t gold and 24 g/t silver from 149 metres.
Individual results of note in this hole are:
High grade silver intercepts (with gold) in the upper part of the assayed zone:
1 m at 122 g/t (4 ounces) silver and 0.2 g/t gold from 108 metres;
1 m at 146 g/t silver (5 ounces) and 0.1 g/t gold from 118 metres;
2 m at 373 g/t (12 ounces) silver and 0.2 g/t gold from 123 metres including
1 m at 525 g/t (17 ounces) silver and 0.1 g/t gold from 124 metres; and
1 m at 337 g/t (11 ounces) silver and 0.1 g/t gold and from 134 metres.
Significant gold assays in the lower part of zone:
1 m at 2.3 g/t gold and 64 g/t (2 ounces) silver from 153 metres; and
1 m at 6.4 g/t gold and 18 g/t silver (0.5 ounces) from 155 metres.
In addition it is evident that there is a large silver “halo” of up to 10 to 15 g/t silver in the Silica Hill
rhyolite which extends further outwards over many hundreds of square metres (Figures 2, 3 and 8). It is
possible that this may be a “leakage halo” from depth and accordingly the down-dip extension of the
mineralisation in Holes CMIPT011 and CMIPT046 are compelling drill targets.
Connection between mineralisation at Main Shaft and Silica Hill
The style and nature of mineralisation in Hole CMIPT043 is similar to that encountered in the rhyolite
unit within the Commonwealth deposit and further demonstrates that the mineralisation at the two
prospects is part of one larger system. It is possible that the mineralisation at Silica Hill and Main Shaft
may be linked at depth. Areas where the two styles of mineralisation may connect will be priority target
areas.
A gold-silver-in-soil anomaly extends in a NE direction from Main Shaft to Silica Hill and widens in that
direction. This anomaly is open to the north and north-east. This is a further indication that the two areas
may be linked and further drilling at depth is required.
Very high grade silver values of almost 1 kg/tonne over 1 metre were returned in the 2016 drill
programme from Hole CMIPT031 at Main Shaft in a 7 metre thick zone of massive sulphide
mineralisation that returned:
7 metres at 6.3 g/t gold, 496 g/t silver (15.9 ounces), 7.2% zinc, 2.9% lead and 0.2% copper
(17.7 g/t gold equivalent) from 91 metres
including 3 metres at 10.6 g/t gold, 571 g/t silver (18.4 ounces), 7.8% zinc, 2.1% lead and
0.2% copper (23.0 g/t gold equivalent) from 92 metres and
also including 1 metre at 2.5 g/t gold, 979 g/t silver (31.5 ounces), 8.3% zinc, 4.4% lead and
0.1% copper (21.4 g/t gold equivalent) from 95 metres
This intercept is open down dip, beneath the silver-rich intercepts at Silica Hill (Figure 2).
2. BROKEN HILL PGM-Ni-Cu PROJECT (Impact 100%)
Work completed during the Quarter comprised a petrographic study of 68 rock chip samples collected
in the previous quarter in the western part of the project area to check possible copper-anomalous
areas identified in regional maps prepared by the Geological Survey of New South Wales. The results
of this work have been received and are being interpreted.
The Broken Hill Project comprises two granted exploration licences (EL7390 and EL8234) and two
exploration licence applications (ELA5793 and ELA5265) that cover 517 square kilometres of rocks
prospective for two distinct styles of mineralistion (Figure 10).
1. PGE-copper-nickel associated with ultramafic rocks; and
2. Zinc-lead-silver in “Broken Hill-style” deposits hosted mostly by metasedimentary rocks and
amphibolites.
Impact owns 100% of three of the licences. The mineral rights for the fourth licence, EL7390, were split
in the early 2000’s into the two different styles of mineralisation. Impact recently acquired EL7390 from
Golden Cross Resources Limited and this entitles Impact to:
100% of the PGE-copper-nickel mineralisation; and
80% of the zinc-lead-silver Broken Hill-style mineralisation in EL7390 in joint venture with
Silver City Minerals Limited (ASX: SCI). Impact will free-carry Silver City’s 20% interest to a
Decision to Mine.
Golden Cross has a 1% gross production royalty on all metals to which Impact has rights for. Impact, at
its election, also has the right to buy back the royalty for $1.5 million at anytime up to a Decision to Mine,
or leave the royalty uncapped during any production.
A review of previous exploration data during the quarter has identified significant potential for cobalt
mineralisation both as credits to the high grade nickel-copper-platinum group metal (PGM) mineralisation
recently discovered by Impact and as stand alone deposits.
It is now well established that cobalt demand is forecast to grow considerably into the future due to its use
in a variety of products but in particular battery materials, high temperature and other alloys, adhesives,
magnetic materials, glass and ceramics. Accordingly exploration for cobalt either as a primary commodity
or as a by-product is warranted.
Over the past 18 months, and following its high grade nickel-copper-PGM and high grade silver-lead-zinc
discoveries at the Red Hill and Platinum Springs Prospects, Impact has quietly acquired a significant
tenement holding in the Broken Hill region covering some 517 square kilometres and about
100 kilometres of strike extent to the south of the Broken Hill Mine (Figure 10). The company is now one
of the largest landholders in this highly mineralised province.
A review of previous exploration results from Impact and previous explorers as well as mineral
occurrences named and documented by the Geological Survey of New South Wales has now shown that
Impact’s ground is prospective for three different styles of cobalt mineralisation:
1. Cobalt associated with high grade nickel-copper-PGM mineralisation;
2. Pyrite-cobalt deposits (so called Big Hill style deposits) similar to the Thackaringa Cobalt deposits
now being considered for development (three deposits totalling 33 Mt at 0.08% cobalt).
3. Cobalt commonly associated with copper in ironstones (Great Eastern style deposits) or iron-rich
cherts (Sister’s style deposits).
2.1.1 Cobalt associated with high grade nickel-copper-PGM
In previous drill campaigns at Broken Hill, Impact has discovered very high grade nickel-copper-PGM at
two prospects: Red Hill and Platinum Springs. Although not reported at the time, the mineralisation also
contains good grades of cobalt and the metal is a common by-product to nickel-copper sulphide deposits.
At the Red Hill Prospect Hole RHDH012 returned one of the highest drill intercepts for PGM’s ever
reported in Australia and this also contains significant cobalt. From 68.5 metres down-hole, the hole
returned:
1.2 metres at 0.5% cobalt, 7.4% nickel, 1.8% copper,
10.4 g/t platinum, 10.9 g/t gold, 294 g/t (9.5 ounces) palladium and 19 g/t silver,
4.6 g/t rhodium, 7.2 g/t iridium, 5.6 g/t osmium and 3.1 g/t ruthenium
Part of the 1.2 metre intercept of exceptional PGM mineralisation
Six other drill holes of the 13 mineralised holes completed by Impact at Red Hill returned anomalous
cobalt grades of 0.01% to 0.03% up to 20 metres thick. Intercepts include Hole RHDH001 that returned:
1.9 m at 0.1% cobalt, 2.0% copper 1.2% nickel, 1.1 g/t platinum, 3.4 g/t palladium, 0.2 g/t gold and
15 g/t silver from 53.7 metres down hole;
and Hole RHDH006 which returned:
5.2 m at 0.06% cobalt 1.1% copper 1.6% nickel 0.2 g/t gold 3.9 g/t palladium and 0.8 g/t platinum
from 54.2 metres down hole.
Of interest, low grade cobalt is also associated with the high grade zinc-lead silver mineralisation also
discovered by Impact at Red Hill and attests to the widespread nature of cobalt in the Broken Hill area.
Hole RHDH020 at Red Hill returned:
1.6 metres at 0.013% cobalt, 66.7 g/t silver 22% zinc and 1.6% lead.
Note that Silver City Minerals Limited holds a 20% interest in the silver-lead-zinc rights on E7390 that
hosts Red Hill, free carried to a decision to mine.
At the Platinum Springs Prospect located some 35 km north east of Red Hill, a narrow unit of massive
nickel-copper sulphide unit intersected in Impact’s drill Hole PSD02 returned:
0.6 metres at 0.16% cobalt, 7.4% nickel, 7.6% copper
11.5 g/t platinum, 25.6 g/t palladium, 1.4 g/t gold and 44.3 g/t silver.
Together, these results all show the potential for significant cobalt credits to any economic nickel-copperPGM mineralisation that may be found. Follow up drilling is required at both prospects.
For further details on these results please see the following announcements:
23 October 2015; 26 October 2015; 8 December 2015; 29 January 2016; 3 February 2016.
Figure 10. Impact’s exploration licences in the Broken Hill area showing priority cobalt targets
2.1.2 Pyrite-cobalt deposits (Big Hill style)
Although the Broken Hill region of New South Wales Australia is well known for its silver-lead-zinc
mineralisation, it is also well endowed with extensive cobalt mineralisation including the Thackaringa
Cobalt Project located 25 km west of Broken Hill and about 3 to 5 kilometres west of Impacts extensive
tenement holdings.
The Thackaringa Project has an Inferred Resource of 33 Mt at 0.08% cobalt (833 ppm) for 27,500 tonnes
of contained cobalt. The cobalt occurs within three separate layer parallel bodies of massive pyrite
(Big Hill, Pyrite Hill and Railway) along a 15 km trend of rocks in the so-called Thackaringa Group
(Figure 10 and see http://www.cobaltblueholdings.com).
An interpretation of the regional magnetic data, regional geological maps and mineral occurrence data
indicates that within the western half of Impact’s licences and to the south of the Red Hill Prospect, there
are many tens of kilometres of strike extent of the same rocks that host the Thackaringa deposits that are
prospective for cobalt (Figure 10).
There has been virtually no exploration for cobalt in these areas, much of which lies beneath a thin cover
of recent gravel. A number of occurrences of Big Hill style cobalt deposits have been mapped within,
close to or along strike from Impact’s licences and accordingly the potential for the discovery of further
mineralisation is considered high.
About 30 drill holes have been recorded by the Geological Survey of New South Wales as having
maximum intercepts of between 0.01% and 0.04% cobalt over one to two metre intercepts with maximum
intercepts of up to 0.1% cobalt. However the majority of the drill holes were shallow air core holes and
not targeted specifically at cobalt mineralisation.
A synthesis and interpretation of the scant previous exploration data in this area is underway.
The licences are currently under application and on-ground work will commence upon grant.
2.1.3. Cobalt-Copper-Iron deposits (Broken Hill Great Eastern and Sister’s Styles)
Cobalt mineralisation in the Broken Hill area is also associated with various types of ironstone and
variably with copper and sometimes gold.
Great Eastern-style deposits comprise cobalt+/-copper in magnetite ironstones recognisable as prominent
anomalies in regional magnetic data and Sisters-style deposits which comprise cobalt+/- copper in ironrich chert layers.
Four target areas for these styles of mineralisation have been identified from the previous exploration data
in the north east part of Impact’s licences (Figure 10).
Three prominent magnetic units are prospective for Great Eastern-style deposits. Two occur close to the
northern boundary of Impact’s licences and no records of significant exploration have been found for
these areas. One magnetic unit occurs south of Impact’s Little Darling Creek nickel-copper-PGM prospect
where a prominent magnetic unit has been explored for copper mineralisation (Figure 10). Anomalous
cobalt-in-soil results between 0.05% and 0.22% cobalt occur in many places within an area of several
square kilometres and drill holes have returned intercepts of up to 0.2% cobalt. The area has not been
systematically explored and a detailed review of all this data is warranted.
A number of Sisters-style mineral occurrences have been documented close to and along the Moorkai
Trend of ultramafic rocks that extends over 10 kilometres to the north west of the Platinum Springs
Prospect (Figure 10). There has been no exploration for cobalt in this area.
2.1.4 Next Steps for Cobalt
Exploration for cobalt will be integrated into Impact’s programme of work for the other styles of
mineralisation for which the licences are prospective. A review and synthesis of the previous exploration
data within Impact’s new licence applications is underway together with an interpretation of the regional
magnetic data to better understand the distribution of the host rocks prospective for cobalt.
2.2 VTEM Survey
During the Quarter a VTEM helicopter-borne electromagnetic survey was completed over two key
areas:
the Red Hill-Rockwell Little Broken Hill Gabbra trend; and
the Little Darling Creek Prospect.
A third area, the Moorkai Trend, which contains very anomalous platinum palladium and gold rock chip
samples and a 9 km long ultramafic body, could not be flown because of mustering by the relevant landowner.
This area will likely be flown late in the year.
Final results from the survey are expected in May. A number of new areas for follow up wprk have been
identified.
3. MULGA TANK (Impact 100%)
The 100% owned Mulga Tank gold and nickel project is located 200 km east of Kalgoorlie (Figure 11).
Impact discovered high tenor nickel and copper sulphides at the Mulga Tank Dunite in its maiden drill
programme in 2013 (see announcement 29 January 2014).
Three styles of nickel-copper mineralisation were identified:
1.
Extensive disseminated nickel in the Mulga Tank Dunite with assays of:
2 m at 1.3% nickel including 1 m at 2% nickel and multiple 0.5 m thick zones of 0.5% to
1.2% nickel within an intercept of 115 m at 0.3% nickel;
Other thick intercepts including 21 m at 0.4% nickel and 59 m at 0.3% nickel.
2.
High tenor veins at the base of the Mulga Tank Dunite with assays of:
0.25 m at 3.8% nickel, 0.7% copper and 0.7 g/t PGE and 0.3 m at 0.7% nickel; and
3.
High tenor nickel sulphide in multiple komatiites in a flow channel in the upper part of the dunite
with assays of:
0.75 m at 0.85% nickel, 0.35% copper and 0.28 g/t PGE (Pt+Pd+Au); and
6.7 m at 0.5% nickel.
The style of mineralisation and the nature of the rocks are similar to those that host the significant nickel
deposits at Perseverance (1 Mt of contained nickel) and Mt Keith (>2 Mt of contained nickel) near
Leinster in WA (Figure 8).
In addition the project area occurs in the same geological terrain as the recently discovered Gruyere
deposit of more than 5 million ounces of gold (Figure 8). The Mulga Tank project has been poorly
explored for gold and this will also be a focus of the forward programme.
In 2015 Impact completed an airborne magnetic and radiometric survey over the entire project area, an
innovative combined airborne and ground electrical survey as well as a large soil geochemistry survey
over key target areas.
On receipt of the new soil geochemistry results all of this new data will be used to identify specific targets
for drilling. Impact was recently awarded a grant of $150,000 to drill its targets at the Mulga Tank Dunite
as part of the WA State Governments Exploration Incentive Scheme.
During the Quarter the results of 2,500 soil geochemistry samples that cover the eastern part of the Mulga
Tank Dunite as well as the Panhandle Prospect were received
Share your feedback
Discover