Quarterly Activities and Cashflow Reports
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 31 January 2014
ASX: IPT
Number: 336/310114
Market Cap
A$16.5m (0.034 p/s)
DECEMBER 2013 QUARTERLY REPORT
SUMMARY
Issued Capital
487,063,284
1. MULGA TANK PROJECT, AUSTRALIA (IPT 100% & EARNING 50%)
Impact purchased 20% of E39/988 and 25% of E39/1072, two key licences in
the Mulga Tank Joint Venture, for $170,000 cash.
Maiden drill programme of 8 holes for 3.025 m of diamond and RC drilling
completed to test 5 coincident ground EM and soil geochemistry anomalies
(Conductors 1 to 5) and one soil geochemistry anomaly (SGA Prospect).
High tenor disseminated nickel and copper mineralisation discovered as
disseminations, blebs and veins at 4 targets (SGA Prospect and Conductors
1, 2 and 3).
Best assay results:
SGA Prospect:
Directors
Peter Unsworth
Chairman
Dr Michael Jones
Managing Director
- 114.8 m at 0.3% nickel from 98 m including 2 m at 1.3% nickel from 10.2 m;
- 0.5 m at 0.7% nickel from 155 m; 0.6 m at 0.7% nickel from 181 m; and
- 0.5 m at 1.2% nickel from 211.7 m.
Paul Ingram
Conductor 1:
Markus Elsasser
- 0.75 m at 0.85% nickel, 0.35% copper and 0.24 g/t PGE from 302 m; and
- 6.7 m at 0.5% nickel including 0.4 m at 1% nickel from 362 m;
- 0.5 m at 0.6% nickel from 362 m; and
- 15 m at 0.3% nickel from 471 m.
Non-Executive Director
Non-Executive Director
James Cooper-Jones
Company Secretary
Conductor 2:
- 20 m at 0.4% nickel from 78 m;
- 0.3 m at 0.7% nickel from 154.7 m; and
- 4.4 m at 0.17% copper from 158 m.
Conductor 3:
- 59 m at 0.3% nickel from 117 m; and
- 0.25 m at 3.8% nickel, 0.7% copper and 0.7 g/t PGE from 212 m.
Follow up work programmes will include further soil geochemistry.
Review of soil geochemistry over the entire Mulga Tank Project is in
progress.
www.impactminerals.com.au
309 Newcastle Street
Northbridge
Western Australia 6003
tel
+61 (8) 6454 6666
fax
+61 (8) 6454 6667
email
info@impactminerals.com.au
2. OTHER PROJECTS
Broken Hill Project (NSW) (IPT earning 80%): Field checking, soil and rock chip sampling and re-logging
of previous diamond drill core completed.
Botswana Uranium (IPT 100%): Results of an MMI soil geochemistry survey over the Red Hills Prospect
were received.
Commonwealth (IPT 100%): An Induced Polarisation Survey, field checking and rock chip sampling
completed and results received.
Queensland and Turkey Review of projects in progress.
Interpretation of all these results is in progress.
3. CORPORATE
Merger Implementation Agreement (MIA) with Invictus Gold Limited completed on 6 January 2014. Listed
options now trading as IPTO.
Cash at December 30th 2013 $2.0 million.
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration in Botswana
1.
MULGA TANK PROJECT, W.A. (IPT 100% AND EARNING 50-70%)
The Mulga Tank Project covers about 425 sq km of the poorly explored Minigwal greenstone belt 200
km north east of Kalgoorlie in the emerging mineral province of the south east Yilgarn Craton of
Western Australia. The province is host to Sirius Resources’ Nova nickel deposit; AngloGold Ashanti Independence Group’s Tropicana gold mine; and the significant uranium deposit at Mulga Rocks
(Figure 1).
During the Quarter a significant maiden drill programme comprising 8 drill holes (MTD004-MTD011)
for 3,025 m including 1,971 m of diamond drilling was completed at Mulga Tank. The drill programme
tested six targets comprising five ground electromagnetic (EM) anomalies with coincident soil
geochemical anomalies (Conductors 1 to 5) and one further soil geochemical anomaly, the SGA Prospect
identified by Impact on E39/988 associated with the Mulga Tank Dunite (an ultramafic rock).
The drill programme was in part funded by a $134,000 grant from the W.A. State Government Initiative.
All assays have now been received and significant nickel and/or copper mineralisation that warrants
immediate follow-up work has been found at four of the targets (SGA Prospect and Conductors 1, 2
and 3) and lesser mineralisation has been found at the other two targets (Conductors 4 and 5) (Figure
3 and Tables 1, 2 and 3 and Appendix 1-JORC table).
Three different styles of high tenor nickel and copper mineralisation have been identified (Figure 2):
1. Extensive disseminated nickel sulphide within the Mulga Tank Dunite (SGA Prospect and
Conductors 2 and 3, Figure 2a).
2. Narrow veins of high tenor nickel and copper sulphide both within and at the base of the
Mulga Tank Dunite and which contain textures suggesting they may be remobilised from
zones of more massive sulphide (SGA Prospect and Conductors 2 and 3, Figure 2b).
3. Disseminated nickel sulphide and narrow veins of nickel and copper sulphide associated with
a komatiite flow channel that probably lies immediately above the Mulga Tank Dunite
(Conductor 1, Figure 2c).
In addition three mineralised zones that can be correlated over at least 300 m of strike and which are
open in all directions have been identified on the western side of the dunite in Hole MTD005 drilled
by Impact and in Hole MTD003 drilled by a previous explorer.
In particular the recognition of high tenor mineralisation close to the basal contact of the Mulga Tank
Dunite is very encouraging and demonstrates significant potential for the discovery of a major
massive sulphide deposit along many strike kilometres of this very prospective contact.
These styles of mineralisation and the geology at Mulga Tank are very similar to the Perseverance
Dunite near Leinster in Western Australia that hosts the significant Perseverance deposit (45 Mt at 2%
nickel) and the nearby Rocky’s Reward deposit (9.6 Mt at 2.4% Ni) (Figures 1 and 2).
A note on tenor and grade
The term tenor refers to the metal content within sulphide (and other) minerals. The term grade
refers to the metal content within a volume of rock that contains the sulphide minerals. Therefore,
for example, it is possible to have high tenor sulphides that, say, occur as disseminations of a few
percent in rock that will return a low grade assay from an analysis of the entire rock sample. The
majority of the nickel and copper sulphides discovered at Mulga Tank are of high tenor. This is
encouraging.
Assay Results
1.1 Extensive disseminated nickel sulphide within the Mulga Tank Dunite
SGA Prospect: high tenor nickel sulphide within a large soil geochemistry anomaly
Hole MTD011 was drilled to test the eastern edge of a combined nickel and copper-in-soil anomaly
that covers many square kilometres of the southeast quadrant of the Mulga Tank Dunite (Figure 3).
This drill hole intersected the Mulga Tank Dunite which contains trace to 5% disseminated sulphide
throughout and returned an intercept of 114.8 m at 0.3% nickel from 98 metres.
Within this, five separate zones of higher grade nickel sulphide occur and which returned assays of:
2 m at 1.3% nickel from 102 m including 1 m at 2% nickel from 103 m in the RC pre-collar.
These samples contain extensive visible sulphides;
0.5 m at 0.7% nickel from 155 m from a one metre thick zone of dunite containing sulphide
replacement of olivine crystals;
0.5 m at 0.7% nickel from 158.5 m and 0.6 m at 0.7% nickel from 181 m from two 20 m thick
zones containing up to 5% disseminated nickel sulphides (Figure 4a); and
0.5 m at 1.2% nickel from 211.7 m from a 50 cm thick zone of breccia containing a few clasts of
high tenor nickel sulphide that may have come from a nearby larger body of massive sulphide
(Figure 4b).
The hole was stopped at 220 m depth because of the Christmas break.
This is the first discovery of nickel sulphides in the south east part of the Mulga Tank Dunite and
demonstrates that the dunite contains nickel sulphides over a very large area of many square
kilometres.
Conductors 2 and 3
Holes MTD005 and MTD006 were drilled to test strong EM conductors along the western side of the
Mulga Tank Dunite and the north west along-strike extension of the Mulga Tank Dunite respectively
(Figure 1).
Both holes intersected the dunite which contained trace amounts of disseminated sulphide and
returned broad intercepts of:
21 m at 0.4% nickel from 78 m in MTD005 at Conductor 2; and
59 m at 0.3% nickel from 117 m in MTD006 at Conductor 3.
The discovery of sulphide-bearing dunite in drill hole MTD006 several kilometres along strike from
the main dunite body has, together with airborne magnetic data, demonstrated that prospective
ultramafic units extend for many kilometres along strike to the north west along what is termed the
“Panhandle” (Figure 3).
1.2 High tenor nickel and copper at the base of the Mulga Tank Dunite
Holes MTD005 and MTD006 at Conductors 2 and 3 respectively also intersected narrow veins of high
tenor nickel and copper sulphide towards the base of the Mulga Tank Dunite with best assay results
of:
0.25 m at 3.8% nickel, 0.7% copper and 0.7 g/t PGE (Pt+Pd+Au) from 212.6 m in
Hole MTD006 at Conductor 3; and
0.3 m at 0.7% nickel from 154.7 m in Hole MTD005 at Conductor 2.
The vein textures are similar to those present around some massive sulphide deposits where the
sulphide has been remobilised into later faults and fractures and demonstrate for the first time the
presence of high tenor nickel and copper sulphides close to the basal contact of the Mulga Tank
Dunite, considered to be the most prospective location for a massive sulphide deposit (Figure 2).
Importantly the veins and other important structures are commonly sub-parallel to the drill core axis
and therefore the drill holes are not at the optimum orientation to intersect them. Accordingly Impact
considers it highly likely that many more such veins are present.
1.3 High tenor nickel sulphide in mineralised komatiite flow channel
Holes MTD004, 07 and 10 were drilled to test a strong ground EM anomaly coincident with a nickelin-soil anomaly of up to 3,040 ppb in the north east quadrant of the Mulga Tank Dunite (Figure 1).
Two nickel-copper mineralised ultramafic units, (the Upper Ultramafic Unit (a komatiite) and Lower
Ultramafic Unit) 20 m apart that extend for at least 150 m along strike and thicken considerably from
west to east have been discovered. The two units define the southwestern edge of a “flow channel”
that dips at about 65 degrees to the northwest and contains other ultramafic to mafic sills, flows and
sedimentary rocks (Figures 5 and 6 and (see announcement 3 December 2012).
Such channels are an important control on nickel sulphide mineralisation at major nickel mines such
as Rocky’s Reward, Kambalda and Forrestania in W.A.
The Upper Ultramafic Unit, contains distinctive textures such as “spinifex ore” and irregular blebs
and veinlets that commonly occur in the hanging wall above a number of nickel sulphide deposits in
Western Australia and returned best assays of:
1.75 m at 0.5% nickel, 0.15% copper and 0.14 g/t PGE (Pt+Pd+Au) from 302 m in Hole MTD004
including 0.75 m at 0.85% nickel, 0.35% copper and 0.28 g/t PGE (Pt+Pd+Au) and
0.5 m at 0.6% nickel, 0.1% copper and 0.1 g/t PGE from 328 m in Hole MTD007.
The Lower Ultramafic Unit, which comprises an ultramafic rock that is up to 50 m thick and contains
several zones with up to 5% disseminated sulphides and in the immediate footwall in Hole MTD004
a 30 cm long steeply dipping narrow vein containing high tenor nickel and copper sulphide minerals
(Figure 4c), returned best assays of:
6.7 m at 0.5% nickel from 356 m including 0.4 m at 1% nickel from 362 m in Hole MTD004; and
15 m at 0.3% nickel from 471 m in Hole MTD007.
Spot readings with a hand held XRF machine indicate that the mineralisation within the vein is of
high tenor in places with readings up to 8% nickel and 5% copper. The vein is also sub-parallel to the
drill core axis which therefore is not optimally oriented to intersect other, similar veins.
Two further weakly mineralised ultramafic units containing disseminated sulphides were intersected
in MTD007 below the Lower Ultramafic Unit and returned best assays of:
15 m at 0.3% nickel from 471 m; and
3 m at 03% nickel and 0.16 g.t PGE (Pt+Pd+Au) from 506 metres.
These results indicate that the komatiite flows that lie above the Mulga Tank Dunite are also highly
prospective for nickel deposits such as those at Kambalda in Western Australia.
The up-dip projection of the mineralised channel is coincident with strongly elevated nickel-in-soil
geochemistry responses up to 3,040 ppb (Figures 5, 6 and 7). Nickel-in-soil responses greater than
1,500 ppb define a large area covering about 2 km of strike of the up-dip projection of the mineralised
units and this is a priority area for follow up work (Figure 7).
Importantly the mineralised flow channel at Conductor 1, occurs 15 metres below a 10 m thick unit of
iron sulphide-rich black shale (Figures 1 and 2). This shale is the source of the EM anomalies
identified by both the ground and down hole EM surveys at the Prospect. However it is evident that
the shale may be masking and be difficult to discriminate from, the EM response of any underlying
bodies of massive sulphide.
1.4 Three Mineralised Zones on the west side of the Mulga Tank Dunite
Drill hole MTD005, drilled to test a low to medium strength EM conductor (Conductor 2, Figure 3) at
a depth of about 160 m below surface on the western contact of the Mulga Tank Dunite, intersected
the Mulga Tank Dunite and an underlying sequence of sedimentary rocks and basalts.
Three mineralised zones that can be correlated over at least 300 m of strike and which are open in all
directions were identified in the hole and in Hole MTD003 drilled 300 m to the southeast by a
previous explorer. Two of the zones occur within the Mulga Tank Dunite and the third occurs in the
immediate footwall to the Dunite (Figure 8):
1. The narrow steeply south dipping veins of high tenor nickel sulphides discovered within
the basal contact zone of the Mulga Tank Dunite in Hole MTD005 and which returned an
assay of 0.3 m at 0.7% nickel from 154.7 m, see above) can be correlated with weak PGE
and nickel mineralisation at the base of the dunite in Hole MTD003 of up to 0.3 g/t PGE
and 0.1 g/t gold.
2. The 20 m thick zone of disseminated nickel sulphides that occurs about 100 m above the
base of the Dunite and returned 20 m at 0.4% nickel from 78 m in MTD005 (see above)
can be correlated with Hole MTD003 where previous assays returned an intercept of 11 m
at 0.4% nickel including 1 m at 1.1% nickel and 0.5 g/t PGE (see announcement dated
23 July 2013).
3. A zone of weakly disseminated, veinlet and fracture-fill copper sulphide mineralisation
that is up to 50 m thick in metasedimentary rocks (including sulphide rich black shale
which is the source of Conductor 2) in the immediate footwall of the dunite returned a
best assay of 4.4 m at 0.17% copper from 158 m in Hole MTD005. This zone can be
correlated with numerous assays in MTD003 of up to 0.5% copper over 1 m intervals in
places.
Similar zones of copper sulphide occur below the dunite at Conductor 3 and Conductor 5.
This indicates that significant and extensive late stage remobilisation of copper and other
metals has occurred into the footwall immediately beneath the Mulga Tank Dunite. This
is a common characteristic in many large nickel-copper deposits around the world.
The up-dip projection of the nickel-mineralised zones within the dunite are coincident with elevated
nickel-in-soil geochemistry responses up to 806 ppb together with elevated cobalt and palladium.
Nickel-in-soil responses greather than 800 ppb define a large area along the west side of the Mulga
Tank Dunite and covering more than 3 km of strike of the up-dip projection of the mineralised units.
This is a priority area for follow up work (Figure 9).
1.5 Discussion
A significant amount of new information has been obtained about the geology and mineralisation at
Mulga Tank and this data is being reviewed and synthesised to design follow up work programmes.
Key outcomes of the drill programme include major breakthroughs in Impact’s understanding of the
geology and mineralisation of the area and the efficacy of both the ground and downhole EM surveys
and the soil geochemistry surveys completed in the project area.
Geology and Mineralisation
1. The tenor of most of the nickel and copper sulphides discovered is high. This is the first
direct indication of high grade nickel-copper sulphides in the Minigwal greenstone belt
and also the south east part of the Yilgarn Cration of W.A.
2. Disseminated and remobilised nickel-copper sulphides have been discovered over a large
area of many square kilometres both within and beneath the Mulga Tank Dunite. All of
these features are very encouraging and further supports Impact’s view that the Mulga
Tank Project is very prospective for the discovery of a high grade nickel-copper sulphide
deposit over tens of strike kilometres.
Ground EM and Ionic Leach Surveys
3. Many of the ground EM anomalies that were originally interpreted as one single
conductor have been resolved into as many as 8 separate conductors in places. This
indicates that the ground EM survey did not identify or resolve numerous conductors at
depth.
4. The ionic leach soil geochemistry technique has effectively identified blind nickel and
copper sulphide mineralisation beneath up to 70 m of transported overburden. The ionic
leach technique is a weak chemical digest designed to detect subtle geochemical responses
that may have leaked through transported cover to the surface. The technique potentially
offers a method to help discriminate barren EM conductors such as black shale from
massive sulphides.
Accordingly an orientation soil geochemistry survey has been completed over the
mineralisation at Conductor 1 in order to compare different soil geochemistry techniques
and the optimal sample spacing. Final assays are expected in February and will be used to
determine the best approach to further soil geochemistry programmes.
Both the soil samples and the ground EM survey were completed on wide spaced grids of
400 m between samples and a 400 m moving loop survey respectively. These surveys are
very broad spaced compared to those used in exploration for major nickel deposits and
indicate that further detailed follow up surveys are warranted to better define drill targets.
1.6 Large undrilled copper-gold-silver soil anomaly covering 8 sq km of the
Mulga Tank Dunite
The discovery of widespread nickel and copper mineralisation around the Mulga Tank Dunite
beneath significant soil geochemistry anomalies, prompted a review of the ionic leach soil
geochemistry data over the entire Mulga Tank Dunite.
A large and strongly elevated copper-in-soil anomaly defined by assays above 3000 ppb and up to
4,750 ppb copper that covers approximately 8 sq km has been identified over the south east quadrant
of the Mulga Tank Dunite and also its southern contact with the surrounding rocks (Figure 3).
The anomaly along the southern contact mostly overlies three steeply dipping EM conductors
identified by the ground survey and which lie within the dunite (Figure 3). These conductors were
previously considered to be of a lower priority and have now been upgraded.
In addition, the strongly elevated copper anomaly is coincident with gold- and silver-in-soil
anomalies. Apart from Hole MTD011 this anomaly has not been drilled.
This is very encouraging and has prompted a review of the soil geochemistry data over the entire
Mulga Tank project area and which is still in progress.
1.7 Tenement Holding at Mulga Tank
The Mulga Tank Project comprises 13 exploration licences with differing ownership (Figure 10). During
the Quarter, Impact acquired a third party’s 20% and 25% stake respectively in E39/988 and E39/1072 for
a total of $170,000. Accordingly, of the 13 licences, Impact now:
owns 100% of six licences (E39/1632 and E39/1633 with another four under application) and is in
joint venture on the remaining seven licences with Golden Cross Resources Limited (GCR);
owns 20% of E39/988, with GCR 80%. Impact has the right to earn a further 50% from GCR to
move to 70% ownership;
owns 25% of E39/1072, with GCR 75%. Impact has the right to earn a further 50% from GCR to
move to 75% ownership; and
is earning a 50% interest from GCR in five other licences – E39/1439, E39/1440, E39/1441,
E39/1442 and E39/1513.
1.8 Next Steps
Follow up work including drilling is required at Conductor 1, Conductor 2 and SGA Prospect. The
specific work programmes are currently being designed and will include soil geochemistry and
ground geophysical surveys. The timing, nature and extent of the programmes will depend on the
outcome of the orientation survey at Conductor 1 and the review of the soil geochemistry data over
the entire Mulga Tank Project area. These will be reported in February.
2.
OTHER PROJECTS
2.1 BROKEN HILL PROJECT (IMPACT EARNING 80%)
The Broken Hill Project is located 20 km east of the World Class Broken Hill silver-lead-zinc mine in the richly
mineralised Curnamona Province and consists of one Exploration Licence (EL7390) covering 140 square
kilometres.
Impact can earn 80% of the rights to Ni-Cu-PGE 9ineralization associated with mafic and ultramafic rocks from
Golden Cross Limited by spending an additional $345,000 by November 2015 and a further $200,000 by November
2017.
Previous exploration at Broken Hill has focused on the Platinum Springs Prospect in the area of the Mulga Springs
Gossan. Here some of the highest grade PGE assays in Australia including rare high grades of osmium, iridium
and ruthenium have been returned including a representative 120 kg sample of gossan which returned 19.6 g/t
platinum, 50 g/t palladium, 3 g/t rhodium, 3 g/t osmium, 4.4 g/t iridium, 2 g/t ruthenium, 0.57 g/t gold,
0.34% nickel and 0.71% copper.
Investors should note that these assays may have been upgraded by near surface weathering. However drill holes
beneath some of the gossans has identified massive sulphide mineralisation in relatively fresh rock at about 45 m
below surface with similar grades including best intercepts of:
4 m at 17.9 g/t Pt+Pd+Au, 2.3% nickel and 3.2% copper from 43 m; and
2.1 m at 8.3 g/t Pt+Pd+Au, 3% nickel and 3.5% copper from 45 m.
This suggests very high grade mineralisation may be found in fresh rock at depth.
During the Quarter a field programme comprising field checking, soil and rock chip sampling and re-logging of
previous diamond drill core was completed together with reprocessing of other ground geophysical surveys in
the project area. This work included the completion of two student honours projects. The results of this work
have all been received and are being interpreted.
2.2 BOTSWANA URANIUM (IMPACT 100%)
In 2012 Impact discovered a large multi-metal alteration system at Red Hills similar to those around iron oxidecopper-gold-rare earth-uranium deposits such as Carapeteena and Olympic Dam in South Australia. A follow up
ground gravity survey identified several priority targets for follow up work.
During the Quarter the results of an MMI soil geochemistry survey over the Red Hills Prospect were received. A
total of 424 samples were analysed for a wide variety of metals. Interpretation of the results is in progress.
In May 2013 Impact announced that it had agreed to sell four of its Prospecting Licences in Botswana to Shumba
Resources Limited, a Botswana registered coal exploration and development company, for US$250,000 in cash and
$550,000 in shares. The terms of the deal are:
1.
US$50,000 on signing of the agreement (completed);
2.
US$50,000 on renewal of the licences; and
3.
US$150,000 and the shares on the successful transfer of the licences to Shumba.
The Botswana Department of Mines Energy and Water renews licences on a Quarterly basis. Impact is awaiting
notification as to whether or not the licences were renewed in Decemberor will be renewed the end of March. This
will determine the completion date for the agreement with Shumba and the receipt of the proceeds.
2.3 COMMONWEALTH (IMPACT 100%)
The recently acquired Commonwealth Project is located 95 km north of Orange in New South Wales and occurs
within the highly prospective Lachlan Fold Belt that is host to many major gold-silver-base metal mines
including the Cadia-Ridgeway deposits (Newcrest) that contain 70 million ounces of gold and 12 million tonnes
of copper.
The project area covers about 8 sq km and includes 4 km of strike of the prospective Mine Series volcanic rocks.
Previous exploration focused solely on 300 m of strike stretching from the Commonwealth Mine to the
Commonwealth South area and only 66 drill holes for 3,695 m at an average depth of only 56 m were
completed. Most holes were not systematically sampled for all the ore metals.
At the Commonwealth Mine, previous drill results have identified high-grade massive sulphide mineralisation
that is open to the north and at depth and include:
CM85-1: 7 m at 6.2 g/t gold, 346 g/t silver, 0.22% copper, 3.2% lead and 9.2% zinc;
CM85-2: 3 m at 8 g/t gold, 158 g/t silver, 0.1% copper, 0.8% lead and 2.9% zinc; and
EMC6:
17 m at 3.5 g/t gold, 305 g/t silver and 0.2% zinc.
At Commonwealth South previous drill results indicate both high-grade and thick intercepts of disseminated
and stringer mineralisation, also open at depth in a 200 m long zone, including:
PHC04: 30 m at 6 g/t gold and 17 g/t silver from 28 m including 2 m at 77 g/t gold;
PHC09: 28 m at 2.3 g/t gold and 19 g/t silver from 32 m; and
CW20: 6.9 m at 3.4 g/t gold, 72 g/t silver and 2.2% Zn and 1% lead from 32 m.
During the Quarter an Induced Polarisation survey was completed over part of the project area together with
further field checking and rock chip sampling. Results have been received and are being interpreted. A review of
the Commonwealth Project and surrounding area is also in progress.
2.4 QUEENSLAND PROJECTS AND TURKEY (Invictus Gold Projects)
No significant work was completed in Queensland or Turkey during the Quarter. A review of these projects is
now in progress.
3.
CORPORATE
The Merger Implementation Agreement (“MIA”) between Impact and Invictus Gold Limited (“Invictus”;
ASX: IVG) was completed on 6 January 2014.
Under the associated Share Scheme, Impact offered five IPT shares for every four IVG shares on issue. Impact
acquired 28,962,680 Invictus shares, being the number of shares it does not already own or control, and issued
36,203,364 new Impact shares.
In addition, under an associated Option Scheme, eligible Invictus optionholders have received one new listed
Impact option for every one listed Invictus option held at an exercise price of 20 cents and expiring 30th
November 2015. The options trade under ASX code IPTO.
The merger of Impact and Invictus will result in a simpler corporate and asset ownership structure for Impact
which will provide better access to capital.
A strategic review of all of the projects now held by Impact is underway and will be completed in February.
Dr Michael G Jones
Managing Director
The review of exploration activities and results contained in this report is based on information compiled by Dr Mike Jones, a Member of the
Australian Institute of Geoscientists. He is a director of the company and works for Impact Minerals Limited. He has sufficient experience
which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is undertaking to qualify
as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and
Ore Reserves (the JORC Code). Mike Jones has consented to the inclusion in the report of the matters based on his information in the form
and context in which it appears.
Company Contact
Michael G Jones
Managing Director
T: +61 8 6454 6666
Table 1. Summary of Key Results
Target
Soil
Geochemistry
Anomaly
Conductor
1
Conductor
2
Conductor
3
Conductor
strength
No
conductor
Strong
Weak to
medium
Strong
Drill Hole
ID
MTD011
MTD004
MTD007
MTD010
MTD005
MTD006
Key Results
Four zones of nickel sulphide in the Mulga Tank Dunite including
disseminated “spinifex-ore”and breccia mineralisation. Hole stopped
at 220 m because of Christmas break. Hole returned 115 m at 0.3%
nickel including 2 m at 1.3% nickel from 102 m, 1 m at 0.8% nickel
from 114 m, 0.5 m at 0.7% nickel from 158 m, 0.6 m at 0.7% nickel from
181 m and
0.5 m at 1.2% nickel from 211.7 metres.
Two mineralised komatiites containing disseminated high tenor
nickel-copper sulphides and extending over at least 150 m, thickening
to the east and defining a flow channel. Open in all directions.
Remobilised high tenor nickel and copper massive sulphide veins.
Zone of pyrrhotite-chalcopyrite breccia sulphides 8 m thick in
metasedimentary rocks from 410 m depth.
Best assays were: 0.75 m at 0.85% nickel, 0.35% copper and 0.28 g/t
PGE (Pt+Pd+Au) from 302 metres in the upper komatiite, 6.7 m @ 0.5%
nickel, 0.1% copper and 0.2 g/t PGE including 0.4 m at 1% nickel from
362.5 metres in the lower komatiite.
50 m thick zone of disseminated and fracture controlled chalcopyrite
in footwall of dunite. Immediate footwall returned 4.4 m at 0.17%
copper from 158 metres.
High tenor nickel-copper veins in basal contact zone of dunite
returned 0.3 m at 0.7% nickel from 154.7 metres. Thick zone of
disseminated nickel sulphides in dunite returned 21 m at 0.4% nickel
from 78 metres. Both zones can be correlated over 300 m to the south
east to similar zones in MTD003.
High tenor nickel-copper vein in dunite returned 0.25 m of 3.8% nickel
and 0.7% copper from 212.6 metres.
Dunite is anomalous in nickel and returned 59 m at 0.3% nickel from
117 metres.
EM anomaly unexplained.
Source of conductor
No EM response from ground EM survey.
Downhole EM survey to be done in Q1-Q2 2014.
Single ground EM anomaly resolved into multiple off-hole
conductors by down-hole EM.
Multiple sulphide-rich black shale units with significant folds
and faults are responsibl
Share your feedback
Discover