Quarterly Reports March 2014
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 30 April 2014
ASX: IPT
Number: 344/300414
Market Cap
A$14.6m (0.03 p/s)
MARCH 2014 QUARTERLY REPORT
SUMMARY
1. COMMONWEALTH PROJECT, N.S.W. (IPT 100%)
Issued Capital
487,063,471
Rock chip samples with assays of up to 24 g/t gold, 1,100 g/t silver,
18.2% copper and 5.7% zinc extend mineralised trend at
Commonwealth from 250 m to 2.5 km.
Induced Polarisation ground geophysical survey completed.
Interpretation in progress.
New exploration licences granted to expand ground holding to
315 sq km with significant potential for porphyry copper gold and VMS
Au Cu Zn Pb Ag deposits.
Drill programme to commence in June 2014.
Directors
2. BROKEN HILL PROJECT, N.S.W. (IPT EARNING 80%)
Peter Unsworth
Field checking, further soil and rock chip sampling completed at Red
Hill.
Ground EM survey completed at the Red Hill Prospect. Interpretation
in progress.
Drill programme to commence at Red Hill in June – July 2014.
3. MULGA TANK PROJECT, W.A. (IPT 100% & EARNING 50%)
Twelve new priority target areas for nickel-copper and copper-gold
deposits identified in a review of previous soil geochemistry data.
Gravity survey completed over the Mulga Tank Dunite. Interpretation
in progress.
Chairman
Dr Michael Jones
Managing Director
Paul Ingram
Non-Executive Director
Markus Elsasser
Non-Executive Director
James Cooper-Jones
Company Secretary
4. OTHER PROJECTS
Botswana Uranium (IPT 100%): Interpretation of the results of an MMI
soil geochemistry survey over the Red Hills Prospect is in progress.
www.impactminerals.com.au
Queensland: All licences relinquished except for EPM14116 containing
the high grade Retro Extended Project.
Northbridge
Turkey: Discussions in progress to dispose of or wind up the Turkish
subsidiary company.
5. CORPORATE
Cash at March 31st $0.7 million. Impact received a further $719,000
from the R&D rebate on April 3rd.
309 Newcastle Street
Western Australia 6003
tel
+61 (8) 6454 6666
fax
+61 (8) 6454 6667
email
info@impactminerals.com.au
1.
COMMONWEALTH PROJECT, N.S.W. (IPT 100%)
The following work was completed at Commonwealth during the Quarter:
1.
Further mapping, rock chip and soil sampling.
2.
Induced Polarisation ground geophysical survey.
3.
Further preparation target generation preparation of statutory approvals for a drill programme
due to start in June – July 2014.
1.1 HIGH GRADE ROCK CHIP SAMPLES EXTEND MINERALISED TREND TO 2.5 KM
High grade rock chip samples taken by Impact and previous explorers with assays of up to
24 g/t gold, 1,100 g/t silver, 18.2% copper and 5.7% zinc at the company’s 100% owned
Commonwealth Project in New South Wales have extended the strike length of the known
mineralised zone at the Commonwealth Mine from 250 m to at least 2.5 km (Figures 1 and 2). In
addition, gold-rich and copper-rich parts of the zone have been identified.
Gold-rich mineralised structure: Commonwealth – Commonwealth South area
Samples of gossan and weathered rock found 50 m to 75 m north west of the Commonwealth Mine at
the contact between porphyry rhyolite and volcanic sedimentary rocks returned assays of:
up to 24 g/t gold, 154 g/t silver, 2.9% lead, 0.37% zinc and 0.27% copper.
Samples of silica-altered rocks with semi-massive galena and pyrite from a previously unrecognised
shaft and some 275 m south east of Commonwealth South returned assays of:
up to 3.3 g/t gold, 493 g/t silver 1.2% lead, 0.15% zinc and 0.3% copper (Figure 2).
A previous shallow drill hole (PH 7) 25 m north of this shaft returned 4 m at 1.4 g/t gold and 38 g/t
silver from 22 m depth. There is no other drilling in this area.
Copper-rich mineralised structure: Coronation area
Field checking of the area between the Commonwealth Mine and the Coronation Mine has identified
numerous old shafts and workings over a strike extent of at least 1,500 m that contain extensive
copper oxide minerals, in particular malachite and azurite as well as copper sulphide minerals
(Figures 2 and 3). The old workings have not been drilled.
Samples of the weathered and mineralised sedimentary and porphyritic rocks from the workings
returned assays of up to:
18.2% copper, 58 g/t silver 0.2% zinc, 0.9% lead and 0.35 g/t gold (see Table 1).
These new results have for the first time identified a copper-rich part of the mineralised trend which
extends for 1,500 m of strike north west of the Commonwealth Mine and includes a line of workings
associated with the dormant Coronation Mine (Figure 2). Several near surface weak to moderate
electromagnetic conductors which require drill testing have also been identified close to this line of
workings in a ground electromagnetic survey (Figure 2).
These results have extended the 250 m long mineralised horizon between the Commonwealth Mine and
Commonwealth South to 2.5 km of strike and which is still open and undrilled in both directions.
New Prospects
At Silica Hill, about 200 m north east of the Commonwealth Mine, Impact has discovered a large
area of about 200 sq metres underlain by silica-altered porphyry rock with extensive fine grained
pyrite (Figure 2). The area contains numerous gold-in-soil results of between 0.1 g/t and 0.5 g/t as
well as silver-in-soil results of between 5 g/t and 23 g/t from a previous soil geochemistry survey. A
grab sample of the porphyry rock with about 5% pyrite returned 0.5 g/t gold and 14 g/t silver. The
widespread silica alteration may be a very large silica cap above a massive sulphide deposit.
At the Walls and Stringers Prospects, about 1 km east of the Commonwealth trend, previous rock
chip samples taken in the early 1980’s returned high grade results in zones of silicification around a
late stage porphyry intrusion (Figure 2). There are adits at both prospects but production figures are
not available. At the Walls Prospect four samples returned a grade range of:
0.8 g/t to 15 g/t gold, 17 to 600 g/t silver, up to 0.9% lead and 0.2% zinc.
At the Stringers Prospect six samples returned a grade range of:
0.3 to 2.3 g/t gold, 5 g/t to 1,100 g/t silver and up to 2.6% copper, 5.7% zinc and 1.9% lead.
These prospects have not been explored or drilled. Impact has now secured a new exploration
licence, EL8212, along strike to the east of these two prospects with new licences (Figure 4).
1.2 EM SURVEY IDENTIFIES CONDUCTORS CLOSE TO THE CORONATION COPPER MINE
A ground EM survey completed over part of the Commonwealth project area in late 2013 has
identified several weak to moderate conductors in an area of poor outcrop immediately west of the
Coronation Mine (Figure 2). The conductors trend north-south and dip steeply to the east and are
modelled to be at a shallow depth of between 20 m and 230 m below surface. This area has not been
drilled.
A small outcrop of silicified porphyry rhyolite with trace pyrite and quartz veins occurs over the
conductors and one grab sample returned weakly elevated gold (0.04 g/t), silver (0.2 g/t) and copper
(0.02%) results.
1.3 IP SURVEY
The results of an Induced Polarisation ground geophysical survey over Commonwealth,
Commonwealth South and Silica Hill were received. The results are being interpreted by consultants
from Newexco.
1.4 NEW EXPLORATION LICENCES GRANTED
During the Quarter Impact expanded its land holding around the high grade gold-silver-base metal
Commonwealth Project in NSW from 8 sq km to 315 sq km (Figure 4).
The expansion, a result of the grant of two new 100% owned exploration licences, follows a review of
previous exploration data both at Commonwealth and the surrounding area within the richly
mineralised Molong Volcanic Belt, host to the world class Cadia-Ridgeway mining centre (>25 Moz
gold and 5 Mt of copper) and many other mines and prospects (Figure 1).
The new licences give Impact 100% ownership of a large ground holding in one of the most prolific
mineralised areas in Australia. Impact’s work at Commonwealth and a review of previous
exploration data in the surrounding area has shown that there has been limited exploration in the
northern part of the Molong Volcanic Belt.
The new licences are prospective for a number of different mineral deposit styles, in particular
porphyry copper gold deposits and volcanogenic massive sulphide deposits.
Potential for Porphyry copper-gold-silver deposits
A number of copper, gold and silver occurrences both at Commonwealth and within Impact’s new
licences are hosted in granite and porphyry intrusive rocks (Figures 1 and 2).
At Silica Hill, close to Commonwealth, Impact has now identified a pyrite-silica alteration zone that
is 300 m thick associated with a previously unrecognised quartz-feldspar porphyry intrusion
(Figure 2). Here, a significant silver- and gold-in-soil anomaly covering at least 200 m by 200 m has
also been identified by Impact in previous soil geochemistry data. Further assays from soil and rock
chip samples taken during recent field checking are due in May. This data will be used to identify
additional drill targets for Impact’s maiden drill programme at Commonwealth which will
commence later this Quarter.
Silica Hill was previously unrecognised as an altered porphyry body and Impact anticipates that
there are many similar bodies and unrecognised associations within its new licences.
Other gold occurrences on Impact’s new licences associated with granite and porphyry include
Welcome Jack, Greenobby’s and the dormant Kellys Perseverance Mine with recorded production of
818 oz of gold from 714 tonnes of ore (Figure 1). Face sampling of the mine at a depth of 8 m below
surface in the 1970’s returned up to 3 m at 22 g/t gold. This mine has not been drilled.
Potential for VMS Deposits
The volcanic rocks in the northern Molong Belt are the same age as other belts around the world that
host very large and major volcanogenic massive sulphide (VMS) deposits (Ordovician to Devonian).
It was the lack of exploration for this style of deposit in the Molong belt that prompted the review of
previous exploration data by Impact.
At the Apsley Project near Wellington (Figure 4) native copper, copper sulphide (chalcopyrite) and
copper carbonate (malachite and azurite) mineralisation has been identified over an area of 8 sq km
hosted in mafic volcanic and sedimentary rocks. There are several shafts in the area that are up to
30 m deep and previous rock chip results have returned up to 6.5% copper and 13 g/t silver. There
has been very limited drilling in this area.
The geological characteristics of the area are similar to those at so-called “Besshi-style” VMS deposits,
a sub-type of the VMS deposit style that tends to be copper-rich. One of the type examples of this
style is the Windy Craggy deposit in British Columbia which has a resource of 300 Mt at
1.4% copper, 4 g/t silver and 0.2 g/t gold. The Besshi-style contrasts with the Commonwealth-style of
VMS deposits which are hosted by felsic rocks and tend to be gold-silver-zinc-lead rich.
Impact’s new licences have not been explored for this style of deposit.
1.5 WORK FOR NEXT QUARTER
Final target selection for a drill programme to commence in June 2014 will be completed on receipt of
the remaining soil and rock chip results and the final interpretation of the IP data. The results of all
of this work will be integrated to define further drill targets for drilling in June and July 2014.
Drilling to define an Inferred Resource between Commonwealth Mine and Commonwealth South is
also planned.
ABOUT THE COMMONWEALTH PROJECT
The Commonwealth Mine, a high grade volcanogenic massive sulphide deposit (VMS), was
discovered in 1900 and mined intermittently until the 1930’s. Early production amounted to 470 oz of
gold from 480 tons of oxide ore. A blast furnace was installed in 1905 and 6,476 t was mined at a
grade of 6 g/t gold, 150 g/t silver, 2% copper, 15% zinc and 7% lead. Operations were suspended in
1908 following flooding and there are no records of significant mining activity since.
The project has received little exploration attention in the past 25 years. Previous drilling was focused
on 300 m of strike between the Commonwealth Mine and the Commonwealth South Prospect and
only 66 drill holes for 3,695 m at an average depth of only 56 metres were completed (Figure 2).
Impact’s work has identified significant potential for both further high grade VMS deposits at depth
and along strike from the Commonwealth Mine and importantly bulk tonnage lower grade
disseminated gold and silver mineralisation that either was not recognised or was ignored by the
early miners and previous explorers. In addition it is interpreted that there are at least two
mineralised horizons in the rock sequence.
Exploratory underground drill holes completed in the 1980’s discovered high grade mineralisation
(remnant ore) which is still present at the Commonwealth Mine. Drill intercepts included:
7 m at 5.3 g/t gold, 346 g/t silver, 9.2% zinc and 3.2% lead in CM85-1; and
3 m at 8 g/t gold, 158 g/t silver, 2.9% zinc and 0.8% lead in CM85-2.
A long section and cross sections through the area show high grade drill intercepts over robust
widths that are open at depth and along strike and which confirm the potential for bulk tonnage
mining at Commonwealth. These intercepts include:
At the Commonwealth Mine:
9.8 m at 8.4 g/t gold and 357 g/t silver from 54.2 m in CW29;
4.7 m at 5.5 g/t gold and 253 g/t silver from 54.3 m in CW30; and
17 m at 3.5 g/t gold and 206 g/t silver from 41 m in EMC06.
At Commonwealth South:
30 m at 6 g/t gold and 17 g/t silver from 24 m including 2 m at 77.3 g/t gold in PHC4;
26 m at 2.5 g/t gold and 20 g/t silver from 32 m in PHC9; and
6.9 m at 3.4 g/t gold, 72 g/t silver, 2.2% zinc and 1% lead from 30 m and
5.5 m at 3.8 g/t gold, 45 g/t silver, 0.8% zinc and 0.3% lead from 44 m in CW20.
2.
BROKEN HILL PROJECT (IMPACT EARNING 80%)
The Broken Hill Project is located 20 km east of the World Class Broken Hill silver-lead-zinc mine in the
richly mineralised Curnamona Province and consists of one Exploration Licence (EL7390) covering 110
square kilometres.
Impact can earn 80% of the rights to Ni-Cu-PGE mineralisation associated with mafic and ultramafic
rocks from Golden Cross Limited by spending an additional $100,000 by November 2015 and a further
$200,000 by November 2017.
Previous exploration at Broken Hill has focused on the Platinum Springs Prospect in the area of the
Mulga Springs Gossan. Here some of the highest grade PGE assays in Australia including rare high
grades of osmium, iridium and ruthenium have been returned including a representative 120 kg sample
of gossan which returned 19.6 g/t platinum, 50 g/t palladium, 3 g/t rhodium, 3 g/t osmium, 4.4 g/t
iridium, 2 g/t ruthenium, 0.57 g/t gold, 0.34% nickel and 0.71% copper.
Investors should note that these assays may have been upgraded by near surface weathering. However
drill holes beneath some of the gossans has identified massive sulphide mineralisation in relatively
fresh rock at about 45 m below surface with similar grades including best intercepts of:
4 m at 17.9 g/t Pt+Pd+Au, 2.3% nickel and 3.2% copper from 43 m; and
2.1 m at 8.3 g/t Pt+Pd+Au, 3% nickel and 3.5% copper from 45 m.
This suggests that very high grade mineralisation may be found in fresh rock at depth.
During the Quarter work was focussed at the Red Hill prospect. A field programme comprising field
checking, soil and rock chip sampling and a ground electromagnetic survey were completed. The
results of this work have all been received and are being interpreted to define drill targets for a
programme that will commence in early Q3 2014 after the Commonwealth drill programme has
finished.
3.
MULGA TANK PROJECT, W.A. (IMPACT 100% AND EARNING 50% - 70%)
New Targets Identified
During the Quarter, twelve (12) new priority target areas for nickel-copper and copper-gold deposits
were identified in a review of a broad spaced ionic leach soil geochemistry survey covering the
central part of the 425 sq km project area (Figure 5) (see announcement dated 19 February 2014).
Six of the targets occur on the west side of the project area, along strike and adjacent to the Mulga
Tank Dunite where Impact recently discovered significant nickel and copper mineralisation under
about 50 m of transported cover in its maiden drill programme on E39/988 (Figure 6). Drill intercepts
included:
114.8 m at 0.3% nickel from 98 m including 2 m at 1.3% nickel; and 0.5 m at
1.2% nickel from 211 m; and 0.6 m at 0.7% nickel from 181 m in Hole MTD011; and
0.75 m at 0.85% nickel, 0.35% copper and 0.24 g/t PGE and 6.7 m at 0.5% nickel in
Hole MTD004 (see announcement 29 January 2014).
The mineralisation, which occurs over an area of at least 15 sq km, occurs below elevated nickel-in-soil
and copper-in-soil values. This suggests that nickel and copper ions are migrating to the surface
through the transported cover and are detected by the ionic leach soil geochemistry technique, which is
proprietary to ALS Global Laboratories.
Some of the strongest soil responses, up to 2,670 ppb nickel and 4,830 ppb copper and 4.5 ppb gold
occur in the north west corner of E39/988 (Figure 6). These values are significantly elevated above the
regional background values for these metals. The anomalies are open to the north west along a 10 km
strike extent of the greenstone belt within the project area that has not been soil sampled.
The six other targets occur on the east side of the project area and indicate significant potential for
copper and gold mineralisation (Figure 6). There has been limited aircore drilling in some of these
areas and data from this work is currently being compiled.
The soil samples were mostly taken at a very wide spacing of 400 m between samples with infill
samples taken at 200 m intervals in places. This is a very broad sample spacing compared to that
commonly used in nickel sulphide exploration. Infill soil survey programmes and further surveys are
warranted along strike in areas not yet sampled.
A programme and budget for the next phase of work at Mulga Tank is being prepared.
Gravity Survey
A detailed gravity survey over the Mulga Tank Dunite was completed during the Quarter. The
results have been received and are being interpreted.
ABOUT THE MULGA TANK PROJECT
Impact’s Mulga Tank Project comprises 13 exploration licences covering 425 km² of the Minigwal
greenstone belt and surrounding area in the eastern part of the Yilgarn Craton (Figure 5).
Exploration Model for Mulga Tank: Perseverance and Rocky’s Reward
The Mulga Tank Project is prospective for nickel (and copper) sulphide deposits similar to the
Perseverance (45 Mt at 2% nickel) and Rocky’s Reward (9.6 Mt at 2.4% Nickel) mines near Leinster in
Western Australia (Figure 5). The Mulga Tank Dunite is also very similar to the unit that hosts the
Perseverance nickel deposit as well as the host unit to the Mount Keith disseminated nickel deposit
that contains more than 2 million tonnes of nickel metal.
The geology of the area indicates that the prospective basal unit of the Mulga Tank Dunite is
preserved over a 12 sq km area and has not been explored. In addition there are many 10’s of
kilometres of strike of other ultramafic units throughout the Minigwal greenstone belt that have also
not been drilled. Some of these units are associated with significant nickel-copper-precious metal-insoil anomalies.
Impact has discovered three different styles of high tenor nickel and copper mineralisation within
and surrounding the Mulga Tank Dunite:
1. Extensive disseminated nickel sulphide within the Mulga Tank Dunite, for example at the
SGA Propect;
2. High tenor nickel and copper in veins at the base of the Mulga Tank Dunite, for example at
the Conductor 2 Prospect. This is very encouraging and demonstrates significant potential for
the discovery of a major massive sulphide deposit along many strike kilometres of this very
prospective contact;
3. High tenor nickel sulphide in multiple komatiites in a flow channel, for example at the
Conductor 1 Prospect. Such channels are an important control on nickel sulphide
mineralisation at major nickel mines such as Rocky’s Reward, Kambalda and Forrestania in
W.A.
Impact’s work, together with the results from previous explorers drill holes, demonstrates that the
Mulga Tank Dunite contains nickel sulphides in multiple horizons over a very large area of many
square kilometres.
Summary of the licence ownership at the Mulga Tank Project
Of the 13 licences in the Mulga Tank Project, Impact:
owns 100% of six licences (E39/1632 and E39/1633 with another four under application);
owns 20% of E39/988, with Golden Cross 80%. Impact has the right to earn a further 50% from
Golden Cross to move to 70% ownership;
owns 25% of E39/1072, with Golden Cross 75%. Impact has the right to earn a further 50%
from Golden Cross to move to 75% ownership; and
is earning a 50% interest from Golden Cross in five other licences - E39/1439, E39/1440,
E39/1441, E39/1442 and E39/1513.
A further $1.0 million must be spent by Impact before November 2017 to complete the earn-in from
Golden Cross.
4.
OTHER PROJECTS
4.1 BOTSWANA URANIUM (IMPACT 100%)
In 2012 Impact discovered a large multi-metal alteration system at the Red Hills prospect in Botswana
similar to those around iron oxide-copper-gold-rare earth-uranium deposits such as Carapeteena and
Olympic Dam in South Australia. A follow up ground gravity survey identified several priority targets
for follow up work.
The results of an MMI soil geochemistry survey over the Red Hills Prospect were received last quarter.
A total of 424 samples were analysed for a wide variety of metals and interpretation of the results is in
progress.
In May 2013 Impact announced that it had agreed to sell four of its Prospecting Licences in Botswana to
Shumba Resources Limited, a Botswana registered coal exploration and development company, for
US$250,000 in cash and $550,000 in shares. The terms of the deal are:
1.
US$50,000 on signing of the agreement (completed);
2.
US$50,000 on renewal of the licences; and
3.
US$150,000 and the shares on the successful transfer of the licences to Shumba.
The Botswana Department of Mines Energy and Water renews licences on a Quarterly basis. Impact is
awaiting notification as to whether or not the licences were renewed in April or will be renewed the end
of June, however this is subject to workload at the Department. This will determine the completion date
for the agreement with Shumba and the receipt of the proceeds.
4.2 QUEENSLAND PROJECTS
A review of the Company’s Queensland projects was completed. All licences have been relinquished
except for one licence near Clermont with a 10 km long structure that is host to significant
mineralisation including the Retro and Retro Extended Projects.
4.3 TURKEY
Following a review of the Turkish assets and political situation in Turkey during the Quarter , a
decision was made to close the operations there. Discussions are in progress with one party to dispose
of the subsidiary. If this cannot be concluded, the Turkish subsidiary will be wound up.
5.
CORPORATE
The Merger Implementation Agreement (“MIA”) between Impact and Invictus Gold Limited
(“Invictus”; ASX: IVG) was completed on 6 January 2014.
Under the associated Share Scheme, Impact offered five IPT shares for every four IVG shares on issue.
Impact acquired 28,962,680 Invictus shares, being the number of shares it does not already own or
control, and issued 36,203,364 new Impact shares.
In addition, under an associated Option Scheme, eligible Invictus optionholders have received one new
listed Impact option for every one listed Invictus option held at an exercise price of 20 cents and
expiring 30th November 2015. The options trade under ASX code IPTO.
As well as the reduction in costs achieved by relinquishment of licences and the slowdown in overseas
exploration, significant cost reductions have also been made at the Perth head office. As part of this
process, Impact will relocate its office in June.
Dr Michael G Jones
Managing Director
The review of exploration activities and results contained in this report is based on information compiled by Dr Mike Jones, a Member of the
Australian Institute of Geoscientists. He is a director of the company and works for Impact Minerals Limited. He has sufficient experience
which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is undertaking to qualify
as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and
Ore Reserves (the JORC Code). Mike Jones has consented to the inclusion in the report of the matters based on his information in the form
and context in which it appears.
Figure 1. Location of the Commonwealth Project and Location of Major Mines and Deposits in the
Lachlan Fold Belt of New South Wales.
Figure 2. Commonwealth Project: Geology, Prospects and Significant Rock Chip Assays. Previous exploration
focused solely only on 300 m of strike between the Commonwealth Mine and Commonwealth South Prospect.
Figure 3. Examples of mineralised rocks from the Coronation area. Malachite (green colour)
stained weathered breccia (left) and silica altered pyrite-chalcopyrite-bearing rock (right).
Figure 4. Geology and mineral occurrences in the Molong Volcanic Belt and showing Impact’s
licences that now cover 315 sq km.
Figure 5. Location of Impact’s Mulga Tank Project and significant nickel sulphide mines and
prospects including Perseverance and Rocky’s Reward deposits with new nickel-copper-PGE
discoveries in the emerging nickel-copper province to the east.
5 cm
Figure 6. Image of magnetic data over the Mulga Tank Project showing the location of the
new targets identified in the soil geochemistry data.
APPENDIX 1 - SECTION 1 SAMPLING TECHNIQUES AND DATA
Criteria
JORC Code explanation
Sampling techniques
Nature and quality of sampling (e.g. cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
The targets at Mulga Tank have been drilled by Reverse Circulation (RC) and diamond drill holes
(DD). Eight holes for 3,025 m were completed.
A hand held Olympus XRF machine was used to take multi-element readings on the samples bags
from the RC drill pre-collars (I reading every I metre) and at 25 cm to 50 cm intervals on the
diamond core. These readings are a guide only and do not constitute an accurate or precise
assay. Impact has conducted a number of quality control experiments to determine the optimal
reading time and number of readings per sample site. A correlation of these readings against the
assay data suggests that at values greater than 1% nickel, the XRF analyser gives a good
approximation to the chemical assay value.
Drill holes were oriented to intersect the dip of electromagnetic conductors as interpreted by
Impact’s consultants Newexco.
Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used
RC samples have been collected by riffle splitter. Diamond core was used to obtain high quality
samples that were logged for lithological, structural, alteration and other attributes. Sampling
was carried out under Impact Minerals Ltd protocols and QAQC procedures as per industry best
practice.
A combination of mapping, soil geochemistry, airborne magnetic data and ground EM surveys
identified the Mulga Tank target.
Aspects of the determination of mineralisation that are Material to the Public
Report. In cases where ‘industry standard’ work has been done this would be
relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where
there is coarse gold that has inherent sampling problems. Unusual
commodities or mineralisation types (e.g. submarine nodules) may warrant
disclosure of detailed information
Diamond core is mostly NQ2 size, sampled on geological intervals cut into half core to give
sample weights under 3 kg. Reverse circulation drilling was used to obtain 1 m samples from
which 3 kg was pulverised. Samples were crushed, dried and pulverised (total prep) to produce
a sub-sample for analysis by four acid digest with an ICP/OES finish for base metals and lead
collection fire assay with AAS finish for precious metals.
The main sulphide types are expected to be pentlandite and chalcopyrite, with pyrite, and minor
sphalerite. Non-sulphide nickel species in weathered and transitional material have not yet
been identified.
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (e.g. core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc).
Diamond drilling accounts for 75 % of the drilling and comprises HQ and NQ2 sized core. Precollar depths range from 50 m to about 150 m and hole depths range from 300 m to 570 m. The
core was oriented using a down-hole orientation tool at the end of every run with 70% of
orientations rated as “good”.
RC drilling in the pre-collar accounts for 20 % of the total drilling and comprises 140 mm
diameter face sampling hammer drilling.
Method of recording and assessing core and chip sample recoveries and
results assessed
Diamond core and RC recoveries are logged and recorded in the database. Overall recoveries
are >95% for Mulga Tank and there are no core loss issues or significant sample recovery
problems.
Drilling techniques
Drill sample recovery
Commentary
Criteria
Logging
Sub-sampli
Share your feedback
Discover