Company Update - 2014 Corporate Strategy
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 6 March 2014
ASX: IPT
Number: 339/060314
COMPANY UPDATE: 2014 STRATEGY
Impact to focus on:
1. Drill programmes at its high-grade precious and base metal Commonwealth and
Broken Hill projects in NSW in Q2 2014; and
2. Infill soil geochemistry and geophysical surveys to follow up the recent discovery
of nickel-copper sulphides at the Mulga Tank project in WA and new surveys to
define additional targets for drilling in Q3 2014.
Other projects have been relinquished, scaled back or are available for sale or JV
Impact Minerals Limited (ASX:IPT) is pleased to provide this update on its corporate strategy for
2014 based on a review of all of the company’s projects following the recent merger of Impact with
Invictus Gold Limited.
1. Drill Programmes to start in Q2 2014 at Commonwealth and Broken Hill Projects, NSW
Impact will focus its exploration at the poorly explored Commonwealth and Broken Hill high-grade
precious and base metal projects in New South Wales where drill programmes are planned to
commence in May and June 2014.
At the 100% owned Commonwealth Project, Impact recently announced high grade rock chip
samples with assays of up to 24 g/t gold, 1,100 g/t silver, 2.6% copper and 5.7% zinc that have
doubled the prospective strike length of the known mineralised zone at the dormant Commonwealth
Mine to at least 600 metres (Figure 1 and see announcement dated 12th February 2014).
Production from the Commonwealth Mine in the early 1900’s amounted 6,476 t at a grade of
6 g/t gold, 150 g/t silver, 2% copper, 15% zinc and 7% lead. Subsequent exploration was focused
mainly along 300 m of strike close to the mine and only 66 drill holes at an average depth of only
56 metres were completed. Drill intercepts within 60 m of surface that remain open either along
strike or at depth include:
7 m at 5.3 g/t gold, 346 g/t silver, 9.2% zinc and 3.2% lead in CM85-1; and
9.8 m at 8.4 g/t gold and 357 g/t silver from 54.2 m in CW29;
17 m at 3.5 g/t gold and 206 g/t silver from 41 m in EMC06.
30 m at 6 g/t gold and 17 g/t silver from 24 m incl. 2 m at 77.3 g/t gold in PHC4; and
6.9 m at 3.4 g/t gold, 72 g/t silver, 2.2% zinc and 1% lead from 30 m.
Further rock chip assays and the results of ground geophysical surveys have recently been received
and are being interpreted. This will aid drill target definition.
309 Newcastle Street Northbridge Western Australia 6003
Tel +61 (8) 6454 6666 Facsimile +61 (8) 6454 6667
Email info@impactminerals.com.au www.impactminerals.com.au
At the Broken Hill Project Impact is earning an 80% interest in the nickel-copper-PGE rights from
Golden Cross Resources Limited. Previous exploration has identified this project as one of the
highest grade platinum group metal projects in Australia (see announcement dated 16th July 2013).
At the Red Hill Prospect, mining records sourced by Impact from the dormant Red Hill Mine suggest
about 500 tonnes of ore was mined in the early 1900’s with face samples returning a grade range of:
2% to 4% copper, 2% to 3% nickel, 5 to 41 g/t PGE and 22 to 77 g/t silver.
In addition, previous rock chip samples taken over an area of 130 m by 30 m along strike to the north
west of the mine returned a grade range of:
0.2% to 6.1% copper, 0.2% to 1.9% nickel and 1 to 36 g/t PGE.
Impact has identified an electromagnetic anomaly in previous ground geophysical data that is in part
coincident with the area of high grade mineralisation and which is a priority target for drilling. An
interpretation of the previous data and newly received soil geochemistry data to define drill targets
is in progress.
At the Platinum Springs Prospect, massive sulphide mineralisation has been identified close to
surface by previous explorers. Drill results include:
4 m at 17.9 g/t Pt+Pd+Au, 2.3% nickel and 3.2% copper from 43 m; and
2.1 m at 8.3 g/t Pt+Pd+Au, 3% nickel and 3.5% copper from 45 metres.
Follow up drilling is required. A compilation of all previous exploration data for Platinum Springs is
in progress.
2. Follow Up Work at the Mulga Tank Project, WA
The Mulga Tank Project covers 425 sq km of the poorly explored Minigwal greenstone belt 200 km
north east of Kalgoorlie in WA and comprises 13 licences of which six are 100% owned by Impact
and seven are in joint venture with Golden Cross Resources (Impact earning between 50% and 75%).
Impact’s maiden drill programme at the project identified three different styles of high tenor nickel
and copper sulphide mineralisation at four prospects over an area of about 15 sq km within and close
to the Mulga Tank Dunite (see announcement dated 29th January 2014):1. Extensive disseminated nickel sulphide within the Mulga Tank Dunite including results of
2 m at 1.3% nickel including 1 m at 2% nickel;
115 m at 0.3% nickel including multiple zones of 0.5 m at 0.5% to 1.2% nickel; and
other thick intercepts of 21 m at 0.4% nickel and 59 m at 0.3% nickel
2. Narrow veins of high tenor nickel and copper sulphide both within and at the base of the
Mulga Tank Dunite which may be remobilised from zones of more massive sulphide and
including results of:
0.25 m at 3.8% nickel, 0.7% copper and 0.7 g/t PGE and 0.3 m at 0.7% nickel
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
3. Disseminated nickel sulphide and narrow veins of nickel and copper sulphide associated
with a komatiite flow channel that probably lies immediately above the Mulga Tank Dunite
and including results of:
0.75 m at 0.85% nickel, 0.35% copper and 0.28 g/t PGE (Pt+Pd+Au); and
6.7 m at 0.5% nickel.
Further soil geochemistry and ground geophysical surveys are required over these prospects to
refine follow up drill targets. In addition a review of previous soil geochemistry data has identified
numerous other targets away from the Mulga Tank Dunite that require follow up (see announcement
dated 29th January 2014).
It is appropriate that all of this work is completed prior to further drilling and surveys will be
completed over the coming months with the aim of drilling at Mulga Tanka in Q3-Q4 2014.
3. Other Projects
Queensland. Invictus Gold had a large ground holding in Queensland. Following the review
all licences have been relinquished except for one licence near Clermont where Invictus
identified a 10 km long mineralised structure that is host to significant mineralisation including
the Retro and Retro Extended Prospects.
Botswana. Impact has the 100% owned Botswana Uranium Project and the 65% owned Xade
Nickel-Copper-PGE Project both of which contain priority targets for follow up exploration.
Work on the projects has been put on hold pending the renewal of many licences and also a
recovery in commodity prices. All staff have been retrenched and a sub-lease of the office is
being arranged.
Turkey. Impact has decided to close Invictus Gold’s Turkish operations. The political climate
and costs of operating in Turkey have changed significantly in the past year and further
expenditure is not warranted. Discussions are in progress with several parties with a view to
an outright sale of the Turkish subsidiary company. If a buyer cannot be found the company
will be wound up.
4. Funding
Impact is expecting to receive approximately $800,000 cash in the coming months from rent, bond,
VAT and the R and D rebates.
In addition a further $200,000 cash and $550,000 in shares in Shumba Resources Limited, a Botswana
registered coal exploration and development company, is expected following completion of the sale
of four uranium licences in Botswana (see announcement dated 15th May 2014).
The Botswana Department of Mines Energy and Water renews licences on a Quarterly basis. Impact is
expecting that the licences will be renewed in April, however this is subject to the work load at the
department. The renewal date will determine the completion date for the agreement with Shumba and
the receipt of the proceeds.
As well as the reductions in costs achieved by the relinquishment of licences and the slowdown in
overseas exploration, significant cost reductions have also been made at the Perth head office.
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
Dr Michael G Jones
Managing Director
The review of exploration activities and results contained in this report is based on information compiled by Dr Mike Jones, a Member of
the Australian Institute of Geoscientists. He is a director of the company and works for Impact Minerals Limited. He has sufficient
experience which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is
undertaking to qualify as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves (the JORC Code). Mike Jones has consented to the inclusion in the report of the matters
based on his information in the form and context in which it appears.
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
APPENDIX 1 - SECTION 1 SAMPLING TECHNIQUES AND DATA
Criteria
Sampling techniques
JORC Code explanation
Commentary
Nature and quality of sampling (e.g. cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the minerals
under investigation, such as down hole gamma sondes, or handheld XRF
instruments, etc). These examples should not be taken as limiting the broad
meaning of sampling.
At Commonwealth and Broken Hill random rock samples were taken at surface which represented
favourable geology and alteration to known mineralisation in the region. Samples are variably weathered.
The targets at Mulga Tank have been drilled by Reverse Circulation (RC) and diamond drill holes (DD). Eight
holes for 3,025 m were completed.
Include reference to measures taken to ensure sample representivity and the
appropriate calibration of any measurement tools or systems used
Representative samples at each sample site weigh between 0.8 and 1.2 kg. Sample site area was chosen due
to historic rock and soil assay results and the EM survey conducted on the Commonwealth Project. Historic
rock sample methods are unknown but are considered immaterial.
RC samples at Mulga Tank have been collected by riffle splitter. Diamond core was used to obtain high
quality samples that were logged for lithological, structural, alteration and other attributes. Sampling was
carried out under Impact Minerals Ltd protocols and QAQC procedures as per industry best practice.
Aspects of the determination of mineralisation that are Material to the Public
Report. In cases where ‘industry standard’ work has been done this would be
relatively simple (e.g. ‘reverse circulation drilling was used to obtain 1 m
samples from which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required, such as where there
is coarse gold that has inherent sampling problems. Unusual commodities or
mineralisation types (e.g. submarine nodules) may warrant disclosure of
detailed information
Rock samples were sent to SGS Perth where they were crushed, dried and pulverised (total prep) to produce
a 25-30 g sub-samples for analysis initially by Aqua Regia digest with ICP-MS finish for base metals then by
four acid digest with an ICP/AES finish for ore grade base metal samples and lead collection fire assay with
AAS finish for gold.
Historical diamond and RC samples were sent to Fox Anamet, Brookvale NSW where gold was determined by
fire assay, base metals by DCP and AAS methods.
Weathered samples contained gossanous sulphide material and fresh samples containing visible pyrite,
galena, sphalerite and chalcopyrite.
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air blast,
auger, Bangka, sonic, etc) and details (e.g. core diameter, triple or standard
tube, depth of diamond tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc).
Historical diamond drilling at Commonwealth accounts for 76 % of the drilling and comprises NQ sized core.
Historical RC drilling accounts for 24% of the drilling and comprises 6.75 inch/17.1 cm sized core. Historic
core is not oriented down hole but this is not material for the results reported here.
Diamond core at Mulga Tank is mostly NQ2 size, sampled on geological intervals cut into half core to give
sample weights under 3 kg. Reverse circulation drilling was used to obtain 1 m samples from which 3 kg was
pulverised. Samples were crushed, dried and pulverised (total prep) to produce a sub-sample for analysis by
four acid digest with an ICP/OES finish for base metals and lead collection fire assay with AAS finish for
precious metals. Details of previous drill programmes and sampling at Broken Hill are being compiled. They
are not material to this report.
Method of recording and assessing core and chip sample recoveries and
results assessed
Diamond core recoveries for all projects for selected holes are logged and recorded. Overall recoveries have
not yet been calculated but are estimated to be approximately >95% for the Commonwealth Project. No
significant core loss or sample recovery problems are observed in the drill core or historic reports.
Measures taken to maximise sample recovery and ensure representative
nature of the samples
Depths were checked against the depth given on the core blocks and rod counts are routinely carried out by
the drillers. RC samples were visually checked for recovery, moisture and contamination.
Drilling techniques
Drill sample recovery
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
Criteria
Logging
Sub-sampling techniques and
sample preparation
Quality of assay data and
laboratory tests
JORC Code explanation
Commentary
Whether a relationship exists between sample recovery and grade and if
sample bias has occurred due to preferential loss/gain of fine/coarse material.
No sample bias has been established. However there is an indication that wet RC samples may give lower
gold grades due to loss of fine gold.
Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
For historical diamond core information on structure type, dip, dip direction, texture, shape and fill material
has been recorded in the logs. Angles are measured to core axis since core orientation was not done. RQD
data has been recorded on selected historic diamond holes.
Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
Logging of historic diamond core and RC samples recorded lithology, mineralogy, mineralisation, structural
(DDH only), weathering, colour and other features of the samples.
The total length and percentage of the relevant intersections logged
All historic diamond drill holes were logged in full.
If core, whether cut or sawn and whether quarter, half or all core taken.
NQ core samples were half cored and selected intervals of quarter core were selected for check assays.
If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
RC samples were split using a riffle splitter.
For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
The sample preparation of rock chips by Impact at Commonwealth follows industry best practice in sample
preparation involving oven drying, coarse crushing down to ~10 mm followed by pulverisation of the entire
sample (total prep) to a grind size of 85% passing 75 micron.
Quality control procedures adopted for all sub-sampling stages to maximise
representivity of samples.
Laboratory QC procedures for rock sample assays involve the use of internal certified reference material as
assay standards, along with blanks, duplicates and replicates.
The QC procedure for historical diamond and RC samples is unknown but considered immaterial.
Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/second-half
sampling.
Sample duplicates from the historical drilling were taken from selected intervals and compared to the
original assay. Quarter core was taken for diamond samples and riffle resplits for RC samples.
Whether sample sizes are appropriate to the grain size of the material being
sampled.
The samples sizes at Commonwealth are considered appropriate since gold has been identified as
predominantly fine-grained by thin section analysis which would indicate the nugget effect is minimal.
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
An industry standard fire assay technique for rock chips using lead collection with an Atomic Absorption
Spectrometry (AAS) finish was used for gold.
The quality of historical drill sample assays is unknown but is considered immaterial at this exploration stage.
For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis.
No geophysical tools were used to determine material element concentrations.
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
Criteria
Verification of sampling and
assaying
Location of data points
Data spacing and distribution
Orientation of data in relation to
geological structure
Sample security
JORC Code explanation
Commentary
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels of
accuracy (i.e. lack of bias) and precision have been established.
For the rock chips, quality control procedures for assays were followed via internal SGS protocols. Accuracy
and precision are within acceptable limits.
The quality control of historical drill sample assays is unknown, however this is considered immaterial at this
stage of exploration.
The verification of significant intersections by either independent or
alternative company personnel.
Significant intersections from historic drilling or grab samples have not been verified by independent or
alternative companies. This is not required at this stage of exploration.
The use of twinned holes.
One twin historical diamond versus RC hole was drilled at Commonwealth South.
Documentation of primary data, data entry procedures, data verification, data
storage (physical and electronic) protocols.
Primary assay data for rock chips has been entered into standard Excel templates for plotting on Mapinfo. All
historical drill data has been entered digitally by previous explorers and verified internally by Impact.
Discuss any adjustment to assay data.
Any identified historic data entry errors have been adjusted by Impact and recorded in the comments.
Accuracy and quality of surveys used to locate drill holes, trenches, mine
workings and other locations used in Mineral Resource estimation.
Recent drill holes have been located by DGPS. Historical drill holes and mine shafts have been verified by the
DGPS.
Specification of the grid system used.
The grid system for Commonwealth is MGA_GDA94, Zone 55.
Quality and adequacy of topographic control.
Standard government topographic maps have been used for topographic validation. The DGPS is considered
sufficiently accurate for elevation data.
Data spacing for reporting of Exploration Results.
Drill spacing of historical drill holes ranges between 10 and 30 m which is considered adequate for
Exploration Results.
Whether the data spacing and distribution is sufficient to establish the degree
of geological and grade continuity appropriate for the Mineral Resource and
Ore Reserve estimation procedure(s) and classifications applied.
Drill spacing of historical drill holes ranges between 10 and 30 m and may be considered adequate for
Mineral Resource and Ore reserve estimation procedures. However estimations of grade and tonnes have
not yet been made.
Whether sample compositing has been applied.
Sample compositing has been applied for quoting drill composite results only.
Whether the orientation of sampling achieves unbiased sampling of possible
structures and the extent to which this is known, considering the deposit type.
Historical drilling is oriented sub-perpendicular to the mineralised trend and stratigraphic contacts as
determined by field data and cross section interpretation.
If the relationship between the drilling orientation and the orientation of key
mineralised structures is considered to have introduced a sampling bias, this
should be assessed and reported if material.
No significant sample bias has been identified from historical drilling due to the optimum drill orientation
described above. Where present, sample bias will be reported.
The measures taken to ensure sample security.
For rock samples, chain of custody is managed by Impact Minerals Ltd. Samples for Commonwealth are
delivered by Impact Minerals Ltd personnel to SGS Perth for prep and assay. Whilst in storage, they are kept
in a locked yard. Tracking sheets have been set up to track the progress of batches of samples.
Security of historic drill samples is unknown however is considered immaterial.
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
Criteria
Audits or reviews
JORC Code explanation
The results of any audits or reviews of sampling techniques and data.
Commentary
At this stage of exploration a review of the sampling techniques and data by an external party is not
warranted. An internal review of the sampling techniques and data will be completed in due course.
SECTION 2 REPORTING OF EXPLORATION RESULTS
Criteria
Mineral tenement and land
tenure status
Exploration done by other
parties
JORC Code explanation
Commentary
Type, reference name/number, location and ownership including agreements
or material issues with third parties such as joint ventures, partnerships,
overriding royalties, native title interests, historical sites, wilderness or
national park and environmental settings.
The Commonwealth Project currently comprises 1 exploration licences covering 8 km2. The tenement is held
100% by Endeavour Minerals Pty Ltd which has been acquired by Impact Minerals Limited. No aboriginal
sites or places have been declared or recorded over the licence area. There are no national parks over the
license area.
The security of the tenure held at the time of reporting along with any known
impediments to obtaining a licence to operate in the area.
The tenement is in good standing with no known impediments.
Acknowledgment and appraisal of exploration by other parties.
A total of 66 drillholes have been completed over 300 m strike between the Commonwealth main shaft and
Commonwealth South by previous explorers to an average depth of 53 m.
Deposit type, geological setting and style of mineralisation.
The Commonwealth and Commonwealth South deposits are considered gold-rich volcanic hosted massive
sulphide (VMS) deposits that occur at and below the contact with a porphyrictic rhyolite and overlying
volcanic sedimentary rocks.
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for all
Material drill holes:
easting and northing of the drill hole collar
elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
dip and azimuth of the hole
down hole length and interception depth
hole length.
Further details are not material for this early stage of exploration. Information on the historic drill holes is
currently being compiled.
In reporting Exploration Results, weighting averaging techniques, maximum
and/or minimum grade truncations (e.g. cutting of high grades) and cut-off
grades are usually Material and should be stated.
All reported assays have been length weighted. No top cuts have been applied. A nominal cut-off of
approximately 0.5 g/t Au has been applied.
Geology
Drill hole Information
Data aggregation methods
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
Criteria
JORC Code explanation
Commentary
Where aggregate intercepts incorporate short lengths of high grade results
and longer lengths of low grade results, the procedure used for such
aggregation should be stated and some typical examples of such aggregations
should be shown in detail.
High grade massive sulphide intervals internal to broader zones of disseminated sulphide mineralisation are
reported as included intervals.
The assumptions used for any reporting of metal equivalent values should be
clearly stated.
Gold equivalent values have been used in the long section. Metal prices used for the gold equivalent were
$1,650 for gold and $30 for silver. Given the high grade results, it is assumed that very high recoveries will
be achieved. However no metallurgical studies have been completed to verify this. Such studies will be
done as and when appropriate.
Relationship between
mineralisation widths and
intercept lengths
These relationships are particularly important in the reporting of Exploration
Results.
If the geometry of the mineralisation with respect to the drill hole angle is
known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there should
be a clear statement to this effect (e.g. ‘down hole length, true width not
known’).
Diagrams
Appropriate maps and sections (with scales) and tabulations of intercepts
should be included for any significant discovery being reported These should
include, but not be limited to a plan view of drill hole collar locations and
appropriate sectional views.
Refer to Figures in body of text.
Where comprehensive reporting of all Exploration Results is not practicable,
representative reporting of both low and high grades and/or widths should be
practiced to avoid misleading reporting of Exploration Results.
All results reported are representative
Balanced reporting
Other substantive exploration
data
Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical survey
results; geochemical survey results; bulk samples – size and method of
treatment; metallurgical test results; bulk density, groundwater, geotechnical
and rock characteristics; potential deleterious or contaminating substances.
Further work
The nature and scale of planned further work (e.g. tests for lateral extensions
or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions, including the
main geological interpretations and future drilling areas, provided this
information is not commercially sensitive
Historical drill holes to date have been sub-perpendicular to the mineralised trend and stratigraphy so
intervals are close to true width or otherwise stated.
Assessment of other substantive exploration data is not yet complete however considered immaterial at this
stage.
Follow up work programmes will be subject to interpretation of recent and historic results which is ongoing.
An ASX listed Australian company focused on uranium and copper-nickel-PGE exploration.
Share your feedback
Discover