Western Australian Projects Update - Amended
Released
Released
Announcement PDF
ASX ANNOUNCEMENT
Date: 19 April 2021
Number: 741/19042021
UPDATE ON WESTERN AUSTRALIAN PROJECTS:
ARKUN-BEAU Ni-Cu-PGE AND DOONIA Au
•
Arkun Project
Located along trend from the Julimar discovery in the emerging nickel-copper-PGE province of
SW Western Australia.
Field checking and interpretation of magnetic data indicates mafic and ultramafic rocks are likely to
be far more abundant than shown on regional geological maps.
Limited first pass rock chip samples return low level PGE’s in several places throughout the project
area which is very encouraging.
Interpretation of the bedrock geology to identify target areas for detailed follow up work is in
progress.
Interpretation of the surface geology indicates that the majority of the project is amenable to soil
geochemistry which will help in the rapid identification of drill targets.
•
Beau Project.
Tenement recently granted and close to the major Arkun project.
Significant untested magnetic anomaly of similar size and shape to Gonneville (Chalice Gold NL) and
Newleyine (Mandrake Resources Ltd).
Soil geochemistry survey along gazetted roads to commence in May.
•
Doonia Gold Project:
Native Title agreement signed with Ngadju Group. Tenement to be granted shortly.
Strong geophysical and geochemical similarities to the recent Burns discovery located 20km west of
Doonia.
Statutory approvals process commenced for drilling including heritage surveys and environmental
approval.
Drilling to commence in Q3-4 following completion of drill programmes at the Apsley copper-gold
(on-going) and Broken Hill PGE-copper-nickel projects.
26 Richardson Street West Perth Western Australia 6005
Tel +61 (8) 6454 6666 Facsimile +61 (8) 6454 6667
Email info@impactminerals.com.au www.impactminerals.com.au
Impact Minerals Limited (ASX:IPT) is pleased to provide the following update on its activities at its
Western Australian projects. The projects comprise the Arkun-Beau project area located in the emerging
nickel-copper-platinum-metal-group metal province of south west WA and the Doonia gold project
located in the Eastern Goldfields province.
Arkun (100% IPT)
The Arkun Project, which covers about 1,900 square kilometres, is centred between York and Corrigin
130 km east of Perth and was staked following the recent significant PGE discovery at Julimar just
75 km north east of Perth by Chalice Mining NL. (Figure 1 and ASX Release 29th May 2020).
Arkun was first identified as an area of anomalous nickel-copper-gold anomalies in publicly available
regional geochemistry data sets. A subsequent interpretation of regional magnetic data by Impact
identified the area as lying within a major deformation zone or mobile belt that trends NW-SE from
the Moora-Julimar-Yarawindah area through Arkun and which may contain deformed and
metamorphosed equivalents of those rocks (Figure 1: ASX:IPT Release 29th May 2020).
Figure 1. Location and Regional Geology of the Arkun Project and showing key nickel-copper-PGE
deposits and recent discoveries.
The mobile belt is about 500 km long and up to 30 km wide, and is of a scale that suggests it may mark an
ancient terrane boundary or proto-craton margin. Such geological provinces (of varying ages) are well
known around the world as prospective terranes for hosting major nickel-copper-PGE deposits with
examples such as Nova-Bollinger and Mawson (Proterozoic age – Figure 1), the Thomson fold belt in
Canada and the recent discoveries at Yarawindah and Julimar in Western Australia.
Anglo American plc, one of the world’s leading mining companies lodged Exploration Licence
applications covering a vast area of some 10,130 square kilometres surrounding three sides of the Arkun
project on the afternoon of 29th May 2020 a few hours after Impact made its first announcement on Arkun
(Figure 1 and ASX Release 10th June 2020).
Impact has completed some early stage work on the project including reconnaissance field checking and
rock chip sampling along a few gazetted roads. In addition, an interpretation of the surface geology to
assess the effectiveness of the previous soil geochemistry surveys has been completed and this will help to
determine the best surface geochemistry technique to use for follow up surveys. In addition, a detailed
interpretation of the bedrock geology from the regional magnetic data is close to completion.
This work has shown the following:
1. It is likely that mafic and ultramafic rocks are more widespread than shown on the regional
Geological Survey maps.
2. The mafic and ultramafic rocks contain low levels of PGE up to 25 to 30 ppb platinum+palladium
in rock chip samples in many places (Table 1 and JORC Table). The assay values whilst not high,
do attest to the significant prospectivity of the area.
3. Most of the project area is covered by residual soils and ferricrete with limited transported cover.
Accordingly, it is likely that the previous regional soil geochemistry surveys were moderately
effective and that conventional soil geochemistry techniques can be used for follow up soil
sampling. This will allow quick assessments of target areas to be made.
The interpretation of the regional magnetic data will be used to identify priority areas for follow up work
which will include detailed field checking and follow up soil geochemistry surveys together with ground
geophysical surveys where appropriate. The soil geochemistry surveys will commence in May.
The Beau Project
The Beau Project comprises one exploration licence, EL70/5424, which covers 16 square kilometres
and is located about 15 km north of Impact’s Arkun nickel-copper-platinum group element (PGE)
project close to Perth in Western Australia. It lies completely within the exploration licence
applications owned by Anglo American plc (Figure 1).
The project covers a prominent oval magnetic anomaly 3,000 metres by 1,500 metres in dimension
that lies under shallow cover (likely to be less than 30 metres) and which has never been explored
(Figure 2).
The anomaly is of a similar size and geometry to the Gonneville Intrusion, host to the significant PGEcopper-nickel mineralisation discovered recently at Julimar (Chalice Mining NL) and also the
Newleyine intrusion and also proven to host nickel-copper-PGE mineralisation (Mandrake Resources
Limited) (Figures 1 and 2).
Figure 2. Image of regional magnetic data showing the magnetic anomalies at Beau (left), Gonneville
(Chalice Gold centre) and Newleyine (right) for comparison.
The tenement has recently been granted and is now a priority area for follow up work. A soil
geochemical survey along gazetted roads that cross the magnetic anomaly will be undertaken in May.
Doonia (IPT 80%)
Impact’s 80% owned Doonia gold project is located 75 kilometres east of the world class St Ives gold
mining centre in Western Australia and was identified following a review of the Eastern Goldfields for
intrusion-hosted gold deposits in light of the recent major Hemi discovery, hosted by felsic intrusions, in
the Pilbara (ASX:DEG) (Figure 3 and ASX Release 17th November 2020).
The Native Title agreement with the Ngadju People for the Doonia licence was signed recently and final
grant of the tenement is due shortly. Impact thanks the Ngadju People for the straightforward manner in
which the agreement was reached and the Company looks forward to working with them.
Specific drill sites have now been identified at Doonia and heritage surveys are currently being organised
with a view to drilling in Q3-Q4 this year.
In addition, an interpretation of the surface geology and magnetic data over the project has been
completed.
Figure 3. Location of the Doonia Project in the Eastern Goldfields of Western Australia.
The Doonia project has been further enhanced by the recent discovery of significant gold-copper
mineralisation hosted by a magnetic intrusion at the Burns project located just 20 km west of Doonia by
Lefroy Exploration Limited (ASX:LEX, Figure 3 and ASX Release 4th March 2021).
The Burns project area was first identified in the same regional exploration programme by WMC
Resources Limited that identified Doonia. Both areas were subject to broad spaced aircore drilling but
despite modest gold anomalism being returned in places, further work was not recommended.
The Burns discovery indicates that the drill spacing used by WMC was inadequate for the regolith
environment that occurs under and around salt lake environments as previously described by Impact for
Doonia (ASX Release 17th November 2020).
Doonia has a similar geological setting and similar sized modest positive magnetic anomaly to the Burns
discovery where the magnetic response is at least in part directly associated with magnetite alteration
related to the gold-copper mineralisation (Figure 4). The source of the magnetic anomaly at Doonia is
unknown.
In addition, the mineralisation at Burns is characterised by a metal association of copper-molybdenumsilver-bismuth-tellurium-arsenic. Impact has identified a previously unrecognised distinct and coherent
zoned soil geochemical anomaly centred over the numerous small magnetic anomalies visible in the
regional magnetic data and which comprises a core area of gold+bismuth 2,500 metres long and up to
1,000 metres wide surrounded by a larger halo of arsenic+antimony (Figures 4 and 5).
These results are interpreted to be potentially related to a gold-bismuth mineralised system associated
with a differentiated mafic to felsic intrusion. The system covers a large area and is a priority drill target.
Figure 4. Regional magnetic data over the Burns prospect (L) and Doonia project (R) at the same scale.
Figure 5. Image of the regional magnetic data showing the zoned soil geochemistry pattern with a core of
gold+bismuth and an outer halo of arsenic+antimony which extends over several square kilometres
centred over numerous magnetic anomalies. The nickel+copper+zinc anomaly is well developed over the
magnetic anomalies and may reflect a buried intrusion.
Dr Mike Jones
Managing Director
The review of exploration activities and results contained in this report is based on information compiled by Dr Mike Jones, a Member
of the Australian Institute of Geoscientists. He is a director of the company and works for Impact Minerals Limited. He has sufficient
experience which is relevant to the style of mineralisation and types of deposits under consideration and to the activity which he is
undertaking to qualify as a Competent Person as defined in the 2012 edition of the Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves (the JORC Code). Mike Jones has consented to the inclusion in the report of the matters
based on his information in the form and context in which it appears.
TABLE 1. Details of Rock Chip Samples
APPENDIX 1 - SECTION 1 SAMPLING TECHNIQUES AND DATA
Criteria
Sampling techniques
Drilling techniques
Drill sample recovery
Logging
JORC Code explanation
Commentary
Nature and quality of sampling (e.g. cut channels, random chips, or specific
specialised industry standard measurement tools appropriate to the
minerals under investigation, such as down hole gamma sondes, or
handheld XRF instruments, etc). These examples should not be taken as
limiting the broad meaning of sampling.
Rock chip and grab samples were taken at outcrops of mafic and ultramafic rocks.
Include reference to measures taken to ensure sample representivity and
the appropriate calibration of any measurement tools or systems used
Samples of about 1 kg to 2 kg in weight were taken as first pass indications of the metal content of the
host units.
Aspects of the determination of mineralisation that are Material to the
Public Report. In cases where ‘industry standard’ work has been done this
would be relatively simple (e.g. ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was pulverised to produce a 30 g
charge for fire assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent sampling problems.
Unusual commodities or mineralisation types (e.g. submarine nodules)
may warrant disclosure of detailed information
N/A
Drill type (e.g. core, reverse circulation, open-hole hammer, rotary air
blast, auger, Bangka, sonic, etc) and details (e.g. core diameter, triple or
standard tube, depth of diamond tails, face-sampling bit or other type,
whether core is oriented and if so, by what method, etc).
N/A
Method of recording and assessing core and chip sample recoveries and
results assessed
N/A
Measures taken to maximise sample recovery and ensure representative
nature of the samples
Standard field procedures for rock chip and grab samples were used.
Whether a relationship exists between sample recovery and grade and
whether sample bias may have occurred due to preferential loss/gain of
fine/coarse material.
No sample bias has been established.
Whether core and chip samples have been geologically and geotechnically
logged to a level of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical studies.
N/A
Whether logging is qualitative or quantitative in nature. Core (or costean,
channel, etc) photography.
N/A
Criteria
Sub-sampling techniques and
sample preparation
Quality of assay data and
laboratory tests
Verification of sampling and
assaying
JORC Code explanation
Commentary
The total length and percentage of the relevant intersections logged
N/A
If core, whether cut or sawn and whether quarter, half or all core taken.
N/A
If non-core, whether riffled, tube sampled, rotary split, etc and whether
sampled wet or dry.
N/A
For all sample types, the nature, quality and appropriateness of the sample
preparation technique.
The size and distribution of the rock chip samples is appropriate for regional exploration.
Quality control procedures adopted for all sub-sampling stages to
maximise representivity of samples.
Laboratory QC procedures for soil samples involve the use of internal certified reference material as
assay standards, along with blanks, duplicates and replicates.
Measures taken to ensure that the sampling is representative of the in situ
material collected, including for instance results for field duplicate/secondhalf sampling.
No field duplicates were taken as this is not warranted at this early stage of exploration.
Whether sample sizes are appropriate to the grain size of the material
being sampled.
Sample sizes are appropriate
The nature, quality and appropriateness of the assaying and laboratory
procedures used and whether the technique is considered partial or total.
Samples were submitted to Intertek Laboratories in Perth for assay by 4 acid digest with ICP-MS finish
and Fire Assay technique FA/50 MS (lead collection) for gold, platinum and palladium. Sample
preparation involved: sample crushed to 70% less than 2mm, riffle split off 1 kg, pulverise split to >85%
passing 75 microns.
For geophysical tools, spectrometers, handheld XRF instruments, etc, the
parameters used in determining the analysis including instrument make
and model, reading times, calibrations factors applied and their derivation,
etc.
N/A
Nature of quality control procedures adopted (e.g. standards, blanks,
duplicates, external laboratory checks) and whether acceptable levels of
accuracy (i.e. lack of bias) and precision have been established.
Duplicate samples are not required at this early stage of exploration.
The verification of significant intersections by either independent or
alternative company personnel.
The results have not been verified by independent or alternative companies. This is not required at this
stage of exploration.
The use of twinned holes.
N/A
Documentation of primary data, data entry procedures, data verification,
data storage (physical and electronic) protocols.
Primary assay data has been entered into standard Excel templates for plotting in Mapinfo. All historical
data has been entered digitally by previous explorers and verified internally by Impact.
Discuss any adjustment to assay data.
There are no adjustments to the assay data.
Criteria
Location of data points
JORC Code explanation
Accuracy and quality of surveys used to locate drill holes (collar and downhole surveys), trenches, mine workings and other locations used in Mineral
Resource estimation.
Commentary
Sample locations were located by hand held GPS.
Specification of the grid system used.
The grid system for ARKUN is MGA_GDA94, Zone 50.
Quality and adequacy of topographic control.
N/A
Data spacing for reporting of Exploration Results.
The samples were taken at various outcrops over a wide area 30 km by 20 km in size.
Whether the data spacing and distribution is sufficient to establish the
degree of geological and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation procedure(s) and classifications
applied.
N/A
Whether sample compositing has been applied.
N/A
Whether the orientation of sampling achieves unbiased sampling of
possible structures and the extent to which this is known, considering the
deposit type.
Not relevant to soil results.
If the relationship between the drilling orientation and the orientation of
key mineralised structures is considered to have introduced a sampling
bias, this should be assessed and reported if material.
Not relevant to soil results.
Sample security
The measures taken to ensure sample security.
Chain of custody was managed by previous explorers. There is no reason to doubt the veracity of the
samples.
Audits or reviews
The results of any audits or reviews of sampling techniques and data.
At this stage of exploration a review of the sampling techniques and data by an external party is not
warranted.
Data spacing and distribution
Orientation of data in relation
to geological structure
SECTION 2 REPORTING OF EXPLORATION RESULTS
Criteria
Mineral tenement and land
tenure status
JORC Code explanation
Commentary
Type, reference name/number, location and ownership including
agreements or material issues with third parties such as joint ventures,
partnerships, overriding royalties, native title interests, historical sites,
wilderness or national park and environmental settings.
The Arkun Project currently comprises 7 exploration licences covering 900 km2. The tenements are held
100% by Aurigen Pty Ltd a 100% owned subsidiary of Impact Minerals Limited. Impact has signed Land
Access agreements in place with the various claim groups that cover the area.
The security of the tenure held at the time of reporting along with any
known impediments to obtaining a licence to operate in the area.
The tenement is in good standing with no known impediments.
Criteria
Exploration done by other
parties
Geology
Drill hole Information
Data aggregation methods
JORC Code explanation
Commentary
Acknowledgment and appraisal of exploration by other parties.
There has been no significant previous work at this project.
Deposit type, geological setting and style of mineralisation.
Nickel-copper-PGE sulphide mineralisation associated with mafic to ultramafic intrusions and goldcopper in deformed and metamorphosed greenstone belts.
A summary of all information material to the understanding of the
exploration results including a tabulation of the following information for
all Material drill holes:
•
easting and northing of the drill hole collar
•
elevation or RL (Reduced Level – elevation above sea level in
metres) of the drill hole collar
•
dip and azimuth of the hole
•
down hole length and interception depth
•
hole length.
N/A
In reporting Exploration Results, weighting averaging techniques,
maximum and/or minimum grade truncations (e.g. cutting of high grades)
and cut-off grades are usually Material and should be stated.
N/A.
Where aggregate intercepts incorporate short lengths of high grade
results and longer lengths of low grade results, the procedure used for
such aggregation should be stated and some typical examples of such
aggregations should be shown in detail.
N/A
The assumptions used for any reporting of metal equivalent values should
be clearly stated.
N/A
Relationship between
mineralisation widths and
intercept lengths
These relationships are particularly important in the reporting of
Exploration Results.
If the geometry of the mineralisation with respect to the drill hole angle is
known, its nature should be reported.
If it is not known and only the down hole lengths are reported, there
should be a clear statement to this effect (e.g. ‘down hole length, true
width not known’).
Diagrams
Appropriate maps and sections (with scales) and tabulations of intercepts
should be included for any significant discovery being reported These
should include, but not be limited to a plan view of drill hole collar
locations and appropriate sectional views.
Refer to Figures in body of text.
Where comprehensive reporting of all Exploration Results is not
practicable, representative reporting of both low and high grades and/or
widths should be practiced to avoid misleading reporting of Exploration
Results.
All results reported are representative
Balanced reporting
N/A
Criteria
JORC Code explanation
Other substantive exploration
data
Other exploration data, if meaningful and material, should be reported
including (but not limited to): geological observations; geophysical survey
results; geochemical survey results; bulk samples – size and method of
treatment; metallurgical test results; bulk density, groundwater,
geotechnical and rock characteristics; potential deleterious or
contaminating substances.
Further work
The nature and scale of planned further work (e.g. tests for lateral
extensions or depth extensions or large-scale step-out drilling).
Diagrams clearly highlighting the areas of possible extensions, including
the main geological interpretations and future drilling areas, provided this
information is not commercially sensitive
Commentary
Assessment of other substantive exploration data is not yet complete however considered immaterial at
this stage.
Follow-up work programmes will be subject to interpretation of results which is ongoing.
Share your feedback
Discover